SC&T VE01HA User manual

Smart Cabling & Transmission Corp.
V1.0
VGA Extender
User Manual
Model : VE01HA
High Resolution VGA & Stereo CAT5e Extender 1920 x 1200 -
70M

1
User Manual
VE01HA
Introduction
VE01HA is a VGA extender designed to use a cost-effective Ethernet cable to carry the signal with stereo
audio for a long distance.
It's the ideal solution for shopping malls, public address systems, airports, train & bus stations,
boardrooms, trade shows, computer-based training applications.
Features
Resolution up to 1920 x 1200
Signal extension up to 70M over 4 pairs UTP cable.
Supports stereo audio.
No external power required at RX unit.
Installation View
VE01HA
Panel View
VE01HAT
VE01HAR
Cable
Video Link cable using high quality CAT5E UTP/STP or CAT6 UTP cable.
Please noted STP cable could enhance noise rejection, but also less transmission range and picture
sharpness quality.

2
User Manual
VE01HA
RJ45 Define
Link Cable (TIA/EIA-568-B )
1. Orange-white
Blue -
2. Orange
Blue +
3. Green-white
Green -
4. Blue
+12V/Audio +
5. Blue-white
GND /Audio -
6. Green
Green +
7. Brown-white
Red –
8. Brown
Red +
VE01HAT LED
Blue LED : power on/off
RJ45 LED (Link cable connector) Green: VGA signal
VE01HAR LED
Blue LED: power on/off
RJ45 LED (Link cable connector) Green: VGA signal
Troubleshooting
VE01HAR RJ45 yellow LED on: the audio function damaged.
Caution
1. VE01HA cannot work with any of our other VGA CAT5 extender products which will cause
product damage.
2. This device not Ethernet product, do not connect any Ethernet.
3. The cabling must away from any equipment with electromagnetic wave, i.e.: microwave, radio
equipment, high voltage lines.

3
User Manual
VE01HA
Specification
ITEM NO.
VE01HAT
VE01HAR
Support
Max. Video Resolution
1920 x 1200px
Max. Transmission Distance
70M over CAT5e or Greater
Video/ Audio Bandwidth
Video at 700 MHz, -3dB, Audio at 20 to 20KHz, -3dB
Ports & Interfaces
Video Input
1 x DB15 (75Ω, 0.7Vp-p)
1 x RJ45
Video Output
1 x RJ45
1 x DB15 (75Ω, 0.7Vp-p)
Audio Interface
1 x Ø 2.0mm Phone Jack
(2Vp-p, 10KΩ)
1 x Ø 2.0mm Phone Jack
(2Vp-p, 10KΩ)
Power
Power Supply
DC 12V 500mA
Power Consumption
400mA (Max)
Ambient Temperature
Operation
0 to 55℃
Storage
-20 to 85℃
Humidity
up to 95%
Physical Characteristics
Dimensions
67 x 87 x 27mm
67 x 87 x 27mm
Weight
140g
140g