SC&T UE03 User manual

Smart Cabling & Transmission Corp. V2.0
V2.0
USB Extender Series
User Manual
Model : UE03
USB 2.0 CAT5e Extender with 4 Port Hub 50M

1
User Manual
UE03
Introduction
UE03 is a peripheral device designed for extending 4 of USB 2.0 signals, such as USB cameras, touch
screen, touchpad, HDD(External Hard Drive), USB flash drives, keyboards, mouses...etc.
Features
Extends 4 USB signals over an Ethernet cable.
Signal extension up to 50M over CAT5e.
Supports USB 2.0 high-speed and USB 1.1 low-speed, full speed devices.
Built-in 4 USB ports at TX unit for remote control.
Plug & play.
Installation View

2
User Manual
UE03
Panel View
UE03T Device Unit
UE03R Host Unit
LED Status
Green LED Status
Blinking
Breathing
Dark
Function
Data Transferring
Stand-by*
No Power to UE03T
*Stand-by Description
1. UE03T not connected to UE03R.
2. UE03T connected to UE03R, but no USB Host connected to UE03R.
3. UE03R connected to UE03T and a USB Host, but the USB Host is in power-off state.
Transmission Chart
USB Standard
Data Rate
Distance
Cable
USB2.0
480Mbps
50M
CAT5e/ CAT6
USB1.1/ USB1.0
12/1.5Mbps
100M
CAT5e/ CAT6
*The statistics are gotten from the testing result of using COMMSCOPE (57535-2) CAT5e cables.
Cable
1. The transmission distance might decrease due to the quality of cable and installation.
2. It is recommend high quality Ethernet cable, such as CAT5e, CAT6. The thicker the cable
diameter is, the less attenuation is achieved.
3. It is recommended to use solid conductor rather than copper-clad steel or stranded conductor
cables which might decrease the transmission performance.

3
User Manual
UE03
Cable Define
Caution
1. UE03 V2.0 is not compatible with V1.0
2. The cabling must be away from any equipment with electromagnetic wave, i.e.: microwave,
radio equipment, high voltage.
3. UE03 device is not an Ethernet product, do not to connect any Ethernet or PoE devices to avoid
any damages.
4. UE03 is not applicable for USB hosts which remain powered after PC/Laptop are shut down.
*If the given situation is encountered as showed in Fig 1, devices connected to UE03T will not be
recognized. Try un-plugging and re-plugging the USB port of UE03R or plugging to another USB
host port (not powered after shut down) to solve the problem.
Fig 1
PIN
Signal
1
Orange-white
DATA +
2
Orange
DATA -
3
Green-white
4
Blue
5
Blue-white
6
Green
7
Brown-white
8
Brown

4
User Manual
UE03
Package Include:
1 x UE03T
1 x UE03R
4 x Screw
4 x Screw Plug
1 x DC5V 2A
Specification
ITEM NO.
UE03T (Device Side)
UE03R (Host Side)
Support
Compliance
USB 2.0(High-speed), USB 1.1(Full-speed), USB1.0(Low-speed)
Data Bandwidth
480Mbps (USB2.0 High-speed)
12Mbps (USB1.1 Full-speed)
1.5Mbps (USB1.0 Low-speed)
Max. Transmission Distance
50M(USB2.0), 100M(USB1.1)
Ports & Interfaces
Data Input
4 x USB Type A (Female)
Max. 500mA output per port, total 1.7A
for 4 USB devices
1 x RJ45
Data Output
1 x RJ45
1 x USB Type A (Male)
Power Input
1 x 5.5mm * 2.5mm DC Jack
Power
Power Supply
DC 5V 2A Regulated
Power Consumption
1.5W
1W
Ambient Temperature
Operation
0 to 50℃
Storage
-20 to 85℃
Humidity
Up to 95%
Physical Characteristics
Dimensions
60 x 70 x 27mm
25.4 x 25.4 x 240mm
190mm cable
Weight
115g
55g