
2
Operation Controls and Function
Button Function
MENU :OSD ON/OFF。
UP :Select up or Increase setting value
DOWN :Select down or Increase setting value
SELECT :Select or setting.
OSD Menu
Resolution
Press SELECT button to setup resolution: 800x600、1024x768、1280x720、1920x1080
Brightness
Press UP or DOWN button to decrease/increase from 0 ~100。
Contrast
Press UP or DOWN button to decrease/increase from 0 ~100。
Saturation
Press UP or DOWN button to decrease/increase from 0 ~100。
Hue
Press UP or DOWN button to decrease/increase from 0 ~100。
Factory Default value setting
Resolution 800 x 600
Brightness 50
Contrast 50
Saturation 50
Hue 50
NOTE: Wrong Resolution setting will cause the picture not display, please initialize factory default value.
Trouble Shooting
1. Under OSD mode: OSD will be auto save after setup and turn off OSD mode after 10 seconds.
2. OSD function only display on VGA, HDMI output mode.
3. Initialize factory default: Unplug the power adaptor, then press MENU button and plug the power
adaptor until LED blinking, then release MENU button.