Schaerer Coffee Club Manual

See also the "Safety and warranty" and "Care" chapters in the operating instructions.
CAUTION! Risk of
machine damage!
There is a risk of scalding in the area where beverages, hot water and steam are dis-
pensed. Never reach under the dispensing points while the machine is dispensing or
during cleaning.
CAUTION! User at risk! The touch screen can su󰀨er damage from improper handling. Never press the touch
screen using force, strong pressure or pointed objects. Do not use abrasive cleaning
products. Never spray glass cleaning products directly onto the touch screen.
Daily cleaning program
A
DI_pfege
B C
Mixer rinsing
►Call up the [Care] menu.
►Select [Cleaning programmes].
►Select [Mixer rinsing].
►Follow information on the display.
;The mixer rinsing starts independently.
Duration about 10 min.
Rinsing should be performed before starting
operation and after the end of the business
day. Mixer rinsing also forms part of the
system cleaning procedure to be performed
weekly.
Milk system rinse
►Select [Care] menu.
►Select [Cleaning programmes].
A milk system rinse also forms part of the
weekly system cleaning procedure. Independ-
ent starting is useful if there are long breaks
between milk beverages being dispensed.
►Select [Milk system rinsing].
►Follow information on the display.
;The milk system rinsing starts indepen-
dently. Duration about 10 min.
The rinsing process rinses out the milk hose
and the milk foamer.
Daily manual cleaning
1 2 3
Cleaning the CleanLock control
panel
►Select [CleanLock].
;15 sec countdown begins.
The touch display is reactivated 15 sec after
the last time it is touched.
Cleaning the grounds container
►Empty the grounds container.
►Rinse the grounds container with running
drinking water.
►Clean with a damp cloth.
►Dry and reinsert.
;Grounds container cleaned and ready
for use.
Cup grid rests on the grounds container.
Always hold the cup grid when emptying the
grounds container.
Drip tray
►Raise slightly at the front and lift it out.
►Remove the drip grid.
►Clean using a cleaning brush.
►Clean the drip tray thoroughly.
Hot liquids could be in the drip tray. If the drip
tray does not correctly engage, there is a risk
of burns from hot uids. Carefully move the
drip tray.
1 2 3
Daily cleaning
Schaerer Co󰀨ee Club

Schaerer AG SC Club / d | V01 | 08/2018
Postfach 336 QRC_SCClub_d_EN
Allmendweg 8 V01 / 08/2018
CH-4528 Zuchwil, Switzerland
[e-mail] / www.schaerer.com N° 020966
6
►Thoroughly clean SteamJet outlet and
cover with the supplied cleaning brush.
►Then rinse the drip tray and drip grid with
clean drinking water.
►Dry drip tray and drip grid, put them to-
gether and reinsert.
Always make sure drip tray is positioned
correctly. Reinstall it carefully so that no
unintended water leakage occurs.
Cleaning the housing
► Switch o󰀨 co󰀨ee machine using [On/O󰀨]
switch.
►Allow the machine to cool down.
Separate programmes
7
►Clean housing of the cooled machine with
a damp cloth.
► Dry using a ne woollen cloth.
;Housing is cleaned.
There is a risk that scratches or dents will
occur during cleaning. Do not clean with
abrasive agents or similar. Use only very mild
cleaning products. Do not use any strong alka-
line, alcoholic or degreasing products. Only
use soft cloths for cleaning.
Option 1: Mixer rinsing
►Select [Mixer rinsing] [A] in the "Care"
menu.
;Mixer rinsing is started.
Option 2: Milk system rinse
►Select [Milk system rinsing] [B] in the
"Care" menu.
;Milk system rinsing is started.
Milk system rinsing and mixer rinsing can be
performed separately, see above.
11