Schaerer Coffee Vito User manual

Schaerer Coffee Vito
Operating instructions
V02 / 12.2009

Illustration Coffee Vito / BASCV - V00 (Original)
Illustration Coffee Vito / BASCV - V00 (Import)
1
11
12
13
10
9
4
5
7
6
2
3
1Topping- / Choc-Container
2Control panel (Details see below)
3Touchscreen
4Frontcover left
5Hot water outlet
Steam outlet (optional)
6Height-adjustable Combi Spout
7Removable drip tray with drip tray grid
8Bean hopper with cover (lockable)
9Tablet and coffee powder insert (not displayed)
10 Water tank intern
11 ON / OFF button
12 Steam button
13 Hot water button
14 Touchscreen
15 6 (programmable)
16 Labeling for beverage buttons
Download: www.schaerer.com/download
14
16
15
8
Schaerer Ltd.
P.O. Box Original operating instructions
Allmendweg 8 BASCV_EN
CH-4528 Zuchwil
[e-mail] / www.schaerer.com N° 022001

www.schaerer.com
3
BASCV - EN
Version 02 12.2009
All rights reserved, including translations into foreign languages. It is prohibited to copy, reproduce and distribute this document or any excerpts
thereof in any manner – including electronic means – without first obtaining the publisher’s written consent. All of the information, technical data,
pictures and illustrations in this manual are based on the most current data available at the time of printing. Schaerer Ltd. reserves the right to
make changes at any time without issuing a separate notification. All pictures, illustrations and display messages in this manual serve only as
examples. Due to a variety of possible options, your machine may differ from the devices shown in this manual. In the event, for any reason, of
disaccord, the German (DE) document shall be authoritative for Schaerer Ltd.
Published by:
Schaerer Ltd., P.O. Box, Allmendweg 8, CH-4528 Zuchwil
Edition:
Version 02 | 12.2009
Software:
V 3.9.1
Concept and editorial department:
Schaerer Ltd., P.O. Box, Allmendweg 8, CH-4528 Zuchwil
© Copyright by:
Schaerer Ltd., P.O. Box, Allmendweg 8, CH-4528 Zuchwil
Schaerer Coffee Vito
Operating instructions
V02 12.2009

www.schaerer.com
4BASCV - EN
Version 02 12.2009
Table of contents
Introduction......................................................... 6
Welcome....................................................................... 6
Signs and Symbols....................................................... 6
Product description............................................ 7
Intended use................................................................. 7
Beverage types and output........................................... 7
Models.......................................................................... 7
Scope of delivery and accessories............................... 7
Optional accessory units .............................................. 8
MyFridge...................................................................................... 8
Cup warmer or Cup & Cool.......................................................... 8
Technical details ........................................................... 9
Serial plate.................................................................... 9
EC declaration of conformity ........................................ 9
Manufacturer’s address ............................................................... 9
Applied Standards ..................................................................... 10
Installation and commissioning...................... 11
Setup conditions..........................................................11
Location ..................................................................................... 11
Ambient conditions .................................................................... 11
Electrical connection....................................................11
Water supply connection/drain (optional) ................... 12
Installation .................................................................. 12
Installation plan........................................................... 13
Commissioning program............................................. 14
Installing the water filter ............................................................. 14
Determining the water hardness................................................ 14
Connecting the water supply ..................................................... 14
Connecting the milk supply........................................................ 14
Filling the product hopper .......................................................... 15
Adjusting the filling quantities .................................................... 15
Changing Aquaex (option) ........................................ 15
Water ......................................................................................... 15
Waste water ............................................................................... 15
Labeling the buttons ................................................... 16
Deinstallation and disposal......................................... 16
Operation........................................................... 17
Check before switching on ......................................... 17
Filling .......................................................................... 17
Filling with coffee beans ............................................................ 17
Filling the powder hopper (option) ............................................. 17
Filling with milk/connecting the milk supply (option) .................. 17
Switching on ............................................................... 18
„Ready for operation“ main window............................ 18
Warm rinse field ......................................................................... 18
Hidden „Menu“ and „Information“ fields ..................................... 18
Fault and notice symbols ........................................................... 19
„Information“ menu .................................................................... 19
Dispensing.................................................................. 20
Adjusting the outlet height ......................................................... 20
Shift field (option)....................................................................... 20
Dispensing a coffee beverage ................................................... 20
Dispensing the beverage with ground coffee (option) ............... 20
Dispensing milk beverages........................................................ 21
Dispensing hot water ................................................................. 21
Dispensing steam (option) ......................................................... 21
Dispensing options .................................................... 22
Two beverages .......................................................................... 22
Barista field ................................................................................ 23
Emptying..................................................................... 23
Emptying the grounds container ................................................ 23
Emptying the under-counter grounds collector (option)............. 23
Emptying the drip pan................................................................ 23
Display prompts.......................................................... 24
Switching off ............................................................... 25
End of operation ........................................................................ 25
Extended downtimes ................................................................. 25
Cleaning ............................................................ 27
Cleaning intervals....................................................... 27
Cleaning agents.......................................................... 27
Forced cleaning.......................................................... 28
Daily Cleaning ............................................................ 28
Cleaning the bean hopper ......................................................... 28
Cleaning the powder hopper (option) ........................................ 28
Cleaning menu........................................................................... 29
Cleaning programme ................................................................. 29
Machine surfaces....................................................................... 30
Separate programmes ............................................................... 30
Weekly cleaning ......................................................... 31
Mixing bowl (option)................................................................... 31
Brewing unit ............................................................................... 32
Drinking water tank (option)....................................................... 32
Accessory units (option) ............................................. 33
Cleaning the milk container ....................................................... 33
Cleaning the cooler.................................................................... 33
Defrosting the cooler.................................................................. 33
HACCP Cleaning Concept ......................................... 33
Hygiene regulations ................................................................... 33
Cleaning schedule ..................................................................... 35
Record each cleaning with the time and a signature. ................ 35
Service............................................................... 36

www.schaerer.com
5
BASCV - EN
Version 02 12.2009
Service routine............................................................ 36
Maintenance............................................................... 36
Changing the lter ...................................................... 36
Descaling.................................................................... 37
Adjusting the grinding neness................................... 37
Schaerer customer service......................................... 37
Programming .................................................... 38
Navigation................................................................... 38
Overview..................................................................... 38
„Milk & foam“ menu .................................................... 39
Topping quality/foam quality ...................................................... 39
Macchiato pause........................................................................ 39
„Timer program“.......................................................... 39
Timer status ............................................................................... 39
Timer adjustment ....................................................................... 39
Timer overview........................................................................... 40
Delete the timer ......................................................................... 40
Timer info ................................................................................... 41
„Care“ menu ............................................................... 41
Cleaning program ...................................................................... 41
Foamer cleaning ........................................................................ 41
Mixer rinsing .............................................................................. 41
Descaling ................................................................................... 41
Filter change .............................................................................. 43
Filter rinsing ............................................................................... 43
Customer check-up.................................................................... 43
„Settings“ menu .......................................................... 44
Recipes...................................................................................... 44
Boiler temperature ..................................................................... 46
Reset ......................................................................................... 46
Time and date ............................................................................ 46
Language................................................................................... 46
Contrast ..................................................................................... 46
Softener and Filter ..................................................................... 46
Water hardness.......................................................................... 46
Warm-up rinsing......................................................................... 47
Options ...................................................................................... 47
Illumination................................................................................. 48
Introduction ................................................................................ 48
„PIN enable“ menu ..................................................... 48
„PIN access-control“ menu......................................... 48
Assigning a PIN ......................................................................... 49
Deleting a PIN............................................................................ 49
„Accounting“ level ...................................................................... 49
„Setting“ level............................................................................. 49
„Cleaning“ level.......................................................................... 49
„Accounting“ menu ..................................................... 50
Reading the counter .................................................................. 50
Clearing a specific counter ........................................................ 50
Clearing all counters .................................................................. 50
Troubleshooting ............................................... 51
Faults with message................................................... 51
Self-explanatory fault messages................................................ 51
Fault messages with fault code ................................................. 52
Faults without message.............................................. 53
Water quality ..................................................... 54
Purity of water............................................................. 54
Water values............................................................... 54
Filtration...................................................................... 54
Safety notes ...................................................... 55
User at risk! ................................................................ 55
Danger from cleaning agents ..................................... 56
Use of cleaning agents .............................................................. 56
Storing cleaning agents ............................................................. 56
Disposal of cleaning agents....................................................... 56
Emergency information.............................................................. 56
Risk of damage to the machine.................................. 56
Liability.............................................................. 58
Operator responsibilities............................................. 58
Warranty and liability .................................................. 58
Glossary ............................................................ 59

www.schaerer.com
6BASCV - EN
Version 02 12.2009
Introduction
Introduction
Welcome
This coffeemachine represents the next generation of fully automatic coffee makers. Our company’s core
competence as well as decades of experience were used in designing this machine.
This Operating instructions informs you about the product, as well as how to use and clean the coffeema-
chine. This Operating instructions cannot take every conceivable application into account. For more de-
tailed information not featured in this manual, please contact your service partner or our customer service.
If the device is not used according to the instructions in this manual, the manufacturer accepts no liability
for potential damage.
The coffee machine’s performance depends on proper use and maintenance. Carefully read the Operating
instructions before using the machine for the first time, and keep the manual in an easily accessible place.
We hope you enjoy using your new Schaerer Coffee Vito!
Signs and Symbols
Read the “Safety notes” chapter carefully!
DANGER!
Electrocution!
CAUTION!
Risk of squeezing!
CAUTION!
Machine at risk!
CAUTION!
User at risk!
CAUTION!
Hot fluid!
CAUTION!
Hot surface!
CAUTION!
Hot steam!
Information
Tips Cross-reference

www.schaerer.com
7
BASCV - EN
Version 02 12.2009
Product description
Product description
Intended use
The Schaerer Coffee Vito has been designed to dispense coffee beverages, milk beverages and/or pow-
dered beverages (toppings & chocolate) in different versions – in cups or coffeepots. Additionally, the unit
can supply steam for heating up milk and/or hot water. This unit is designed for industrial and commercial
use. The unit may be placed in self-service areas if attended to by trained personnel.
Use of this equipment is subject to the “General Terms and Conditions” of Schaerer Ltd. and these operat-
ing instructions. In legal terms, any other use is not an intended use. The manufacturer accepts no liabil-
ity for damage resulting from unintended use.
The Schaerer Coffee Vito may not under any circumstances be used to heat up or dispense any
other liquids than coffee, hot water (for beverages or cleaning) or milk (cooled, pasteurised, ho-
mogenised, UHT).
Beverage types and output
Depending on the machine model and options, the following beverages can be prepared (beverage output
is specified in cups per hour):
Espresso (50 – 60 ml): ± 100 cups
Coffee (120 ml): ± 80 cups
Cappuccino (180 ml): ± 60 cups
Latte macchiato (200 ml): ± 40 cups
Hot milk: ± 40 cups
Hot chocolate: ± 40 cups
Hot water: ± 8 litres
Additionally available beverages:
Ristretto•
Café crème•
Chociatto•
Caffeine-free beverages•
Steam•
Models
The following models are available:
Schaerer Coffee Vito Fresh Milk•
Schaerer Coffee Vito Powdered Milk•
Scope of delivery and accessories
Pieces Designation Article number
Dokumentation
Documentation
1 Operating instructions (EN) 022000
1 Daily Cleaning Reference Card (EN) 022020
1 Weekly Cleaning Reference Card (EN) 022040
1 Delivery Quality Form –
Cleaning/cleaning accessories
2 Schaerer/WMF liquid descaler 062869
CAUTION!
Machine at risk!

www.schaerer.com
8BASCV - EN
Version 02 12.2009
Product description
Pieces Designation Article number
100 Cleaning tablets 065221
1) "Milkpure" cleaner 071530
2Brushes
(two different sizes)
3315219000
3303500000
1 Cleaning brush 067409
General accessories
1 Complete spare foamer head (upper and lower part) 3322598000
1 Multitool 3323231000
1 Labels 3323153000
1 Measuring spoon for ground coffee 3307424000
1 Left front cover 060692
1 Water tank 060705
1) Nozzle set 071246
1) Milk hose 0.7 m 0000484948
1) Mixer hose 0.21 m 0000480064
1) Discharge hose, 1.5 m 0000480042
1) Elbow 3321658000
1) Fixed water hose 3322921000
1) Choco outlet 3322962000
Special accessories
1) Cover for optional water tank 060689
1) Protective plug for drip tray 1560018
2) Water filter 071398
2) Waste water tank (for operation without waster water connection) 060706
1) Depending on machine model!
2) Please contact your local sales partner or our customer service!
Optional accessory units
For detailed information, please contact your local sales partner or our customer service!
MyFridge
Schaerer Coffee Vito Milk Smart can optionally be equipped with a cooler (MyFridge). This option can be
retrofitted.
Cup warmer or Cup & Cool
Schaerer Coffee Vito can optionally be equipped with a cup warmer or Cup & Cool. This option can be ret-
rofitted.

www.schaerer.com
9
BASCV - EN
Version 02 12.2009
Product description
Technical details
Power rating * 1700-2200 W
Mains connection * 220-240 V AC 50/60 Hz
Operating temperature Steam boiler ** Hot water boiler **
Permitted operating temperature (T max) 192°C 192°C
Minimum operating temperature (T min.): 10°C 10°C
Overpressure Steam boiler ** Hot water boiler **
Working overpressure 2.5 bar 2.5 bar
Permissible operating overpressure 12 bar 12 bar
Test overpressure 24 bar 24 bar
Water tank 4.5 l
Bean hoppers Approx. 1100 g each
Choc container/topping container Approx. 4.7 l or 2x approx. 2.3 l
External dimensions
Width 329 mm
Height with bean hopper 814 mm
Depth 473 mm
Empty weight Approx. 30-40 kg
Continuous noise level (Lpa) *** < 70 dB (A)
We reserve the right to make technical changes.
* Special equipment, see Serial plate; specied values refer to standard equipment.
** Depending on machine conguration and model.
*** The A-weighted noise level Lpa (slow) and Lpa (impulse) at the operators‘ workplace is below 70 dB(A) in every operating mode.
Serial plate
The serial plate is located behind the drip tray on the left side.
In the event of a fault or warranty claim, specify the information on the serial plate.►
EC declaration of conformity
Manufacturer’s address
Manufacturer Documentation responsible
Schaerer Ltd.
P.O. Box
Allmendweg 8
CH-4528 Zuchwil
T [phone]
F [phone]
[e-mail]
www.schaerer.com
Schaerer AG
Hans-Ulrich Hostettler
P.O. Box
Allmendweg 8
CH-4528 Zuchwil

www.schaerer.com
10 BASCV - EN
Version 02 12.2009
Product description
Applied Standards
The following harmonised standards have been applied:
Machine directive 2006 / 42 / EC EMC Directive 2004 / 108 / EC
60335-1 /A1:2004•
60335-1 /A2:2006•
60335-1 /A11:2004•
60335-1 /A12:2006•
60335-1 /A13:2008•
60335-1: 2002•
60335-2-75 /A1:2005•
60335-2-75 /A11:2006•
60335-2-75 /A2:2008•
61000-6-3:2007-01:•
61000-3-2:2006-04•
61000-6-2:2005-08•
61000-4-3:2006-05•
61000-4-4:2004-12•
61000-4-5:2006-11•
61000-4-11:2004-08•
61000-4-13:2002-06•
55022:2006-09•
The stated manufacturer declares herewith that this machine complies with all relevant stipulations of the
specified EU directives. In case of any modifications of the units that have not been approved by Schaerer,
this declaration is rendered invalid. A quality management system certified by Bureau Veritas, in accord-
ance with SN EN ISO 9001: 2008, has been used to ensure the proper adherence to the requirements.

www.schaerer.com
11
BASCV - EN
Version 02 12.2009
Installation and commissioning
Installation and commissioning
Observe the safety notes and the “Safety” chapter in this Operating instructions!
Setup conditions
Location
Do not set up the coffee machine on hot surfaces or close to ovens.►
Set up the coffee machine on a stable and level surface.►
The surface on which the coffee machine is placed must not warp under the machine‘s weight!
Do not set up the coffee machine on surfaces on which a water jet might be used.►
Danger from incorrect operation! Operation of the coffee machine must be monitored by trained
personnel!
Ambient conditions
The following ambient conditions must be met:
Ambient temperature: 10°C – 40°C (50°F – 104°F)•
Maximum relative humidity: 80% rH•
Never expose the coffee machine to external weather conditions such as rain, snow, frost, etc.►
Danger from weather conditions! The device is not designed for outdoor use.Only use indoors!
Protect the device from frost! If the coffee machine was exposed to negative temperatures, contact►
service partner before using.
Electrical connection
The device must be electrically connected according to the applicable regulations (VDE 0100) as well as
national stipulations. Type of power cable at least H 07 RN-F. The voltage specified on the serial plate must
match the supply voltage at the installation location.
Model Power rating Fuse(instal-
lation site)
Connection cable con-
ductor cross-section
Standard
220 - 240 V AC 50/60 Hz 2000 -
2200 W
10-16 A 1.5 mm2
England,
Ireland 13 A 1.5 mm2
Australia, New
Zealand, China 15 A 1 mm2
Denmark 10 A 1 mm2
USA 120 V AC 50/60 Hz 1700 W 15 A AWG14
Japan 200 V 2 AC 50/60 Hz 2000 W 15 A 2.5 mm2
Danger of electric shock! The following instructions absolutely must be complied with:
The phase must have fuse protection of 10 A / 15 A (amperes)! It must be possible to disconnect the de-•
vice from the mains power supply at all poles.
Never lift or pull the device by the power cord!•
Never pull the plug out of the socket by its cord.•
Never touch the power cord or plug with wet hands!•
Never insert a wet plug into a power socket!•
Never operate a device with a damaged power cord. Have a defective power cord or plug replaced im-•
mediately by a qualified service technician.
Generally, use of an extension cord is discouraged! If an extension cord is used anyway, the following rules
must be complied with:
Minimum cable cross section: 1.5 mm2•
CAUTION!
Machine at risk!
CAUTION!
Machine at risk!
CAUTION!
Machine at risk!
DANGER!
Electrocution!

www.schaerer.com
12 BASCV - EN
Version 02 12.2009
Installation and commissioning
Adhere to the cord data provided by the manufacturer (operating manual) and to local regulations.•
Route the cord in such a way that it does not present a tripping hazard.•
Do not pull the cord over corners or sharp edges, pinch it between objects or allow it to hang loosely in•
the open.
Do not place the cable over hot objects, and protect it from oil and aggressive cleaning agents.•
Water supply connection/drain (optional)
The water supply connection must be made in accordance with the applicable requirements and the regu-
lations of the respective country. If the machine is connected to a newly installed water pipe, the piping
and infeed hose must be thoroughly rinsed to ensure that no dirt particles enter the machine. The coffee
machine must be connected to an installed drinking-water pipe with a stopcock. The machine is installed
by using the mounted pressure hose and the G 3/8" screw connection at the pressure relief component
mounted on the main water valve.
Water pressure Recommended: 0.1 – 0.3 MPa (1 – 3 bar)
Maximum: 0.6 MPa (6 bar)
Water inlet temperature Minimum: 10°C
Maximum: 35°C
If the machine is installed on a water drain, the temperature-stable discharge hose provided must be con-
nected to the outlet of the drip tray and to the siphon. It must be firmly attached to the drain and slanted at a
downward angle (so that the water can flow downward).
Danger from poor water quality and poor material. The following instructions absolutely must be
complied with:
The water must be free of contaminants and the chlorine content may not exceed 100 mg per litre.•
Do not connect the machine to pure reverse osmosis water or other aggressive types of water.•
The carbonate hardness must not exceed 5 – 6°dKH (German carbonate hardness) or 8 – 10°fKH•
(French carbonate hardness), and the total hardness value must always be higher than the carbonate
hardness.
The minimum carbonate hardness is 4°dKH or 7°fKH. The pH value must be between 6.5 – 7.•
Always use the new hose set (fresh water/waste water hose) provided with the machine.•
Installation
Read the „Setup conditions“, „Electrical connection“ and „Water supply connection/drain conditions (op-
tional)“ sections in this chapter carefully!
Unpack the machine.►
The styrofoam pieces in the box may contain accessories!;
Set up the machine as specified in the setup conditions.►
Remove the accessories supplied in the grounds container and water tank.►
Keep the original packaging in case the machine should need to be sent back.►
Plug the power cord into a power socket with an earth contact.►
Option 1: Drip pan
Insert the drip pan.►
Option 2: Waste water tank
Attach the hose to the hose end on the back of the machine using the elbow (see figure shown here).►
Hang the discharge hose into the waste water tank.►
The end of the hose must be located above the water level.;
Option 3: Waste water drain
Attach the hose to the hose end on the back of the machine using the elbow (see figure shown here).►
Connect the discharge hose to the drain system.►
►Route the hose so that it does not sag (shortening it if necessary).
With the „Aquaex“ option, you can choose between these three options.
CAUTION!
Machine at risk!

www.schaerer.com
13
BASCV - EN
Version 02 12.2009
Installation and commissioning
Installation plan

www.schaerer.com
14 BASCV - EN
Version 02 12.2009
Installation and commissioning
Commissioning program
The commissioning program runs through the initial settings on the coffee machine step-by-step. A de-
tailed description of the steps follows.
Press the►button for ± 2 seconds.
The automatic commissioning program begins.;
Follow the instructions on the touch screen:►
Installing the water lter
Remove the water outlet screen installed in the water tank (see the left figure).►
Attach the water filter adapter to the water outlet stud from above and lock it.►
►Unpack the filter cartridge and attach it to the water filter adapter (see the right figure).
Determining the water hardness
Obtain the water hardness of the drinking water from the water supplier or use a carbonate hardness►
tester (included). The German water hardness = ° dKH applies.
►Enter the water hardness on the touch screen when prompted.
Connecting the water supply
With the „Aquaex“ option, you can choose between the following three options.
Option 1: Internal drinking water tank
Pull the water tank forward, remove the cover and take out the accessories.►
Rinse the water tank, fill it with fresh water and install it.►
Option 2: External drinking water tank
Insert the seals carefully (attached to the hose).►
Be sure to check that the connections are leak tight and retighten if necessary!►
Hang the discharge hose into the external drinking water tank.►
The hose end must rest on the bottom of the tank.;
Option 3: Fixed water supply
Insert the seals carefully (attached to the hose).►
►Be sure to check that the connections are leak tight and retighten if necessary!
Attach the hose to the connector on the back of the machine and to the on-site angle valve (3/8“).►
Open the main water valve.►
Connecting the milk supply
Option 1: Milk Smart
Lift the milk cover.►
Open the milk package.►
Insert the milk hose into the milk package and slide in the milk package carefully.►
Ensure that the hose does not become taut when the height of the combination outlet is adjusted!
Green milk nozzle: Cold milk
White milk nozzle: Milk at room temperature
0
4
8
12
16
24
Carbonate hardness tester and values

www.schaerer.com
15
BASCV - EN
Version 02 12.2009
Installation and commissioning
Option 2: Cup & Cool
Insert the hose through the opening and into the cooler.►
Insert the adapter on the milk hose into the connector on the cover.►
Filling the product hopper
Fill the product hopper as instructed on the touch screen.►
See also „Operation“ - „Filling“ - „Filling with coffee beans“ and „Filling the powder hopper (optional)“.
Adjusting the lling quantities
Define the container into which the beverages are to be dispensed.►
Select the beverage for which the adjustment is to be made.►
Use the►TEST field on the touch screen to dispense the beverage and correct the filling quantity,
if necessary, using the +and -fields.
Save the setting with►OK . Repeat the procedure for all beverages.
The system must be rinsed before the beverage can develop its full avour! Please discard the rst
1-2 cups of coffee and do not drink them!
If your coffee machine is equipped with a second level of buttons, the filling quantities of this level can be
adjusted as well. If the second button level is active, the shift button is displayed. Activate the level that is
not active by pressing the shift button.
The settings can be adjusted at any time in the (Settings) menu.
After the commissioning program is completed, the coffee machine is ready for operation.
Changing Aquaex (option)
This is necessary, for instance, to descale the machine.
Water
Changing from fixed water supply/external drinking water tank to internal drinking water tank, or
vice versa:
Close the main water valve on the water supply line.►
Remove the drinking water tank, if present.►
Turn the adjusting screw to the desired position using the multitool.►
Arrow points to the left Water tank
Arrow points to the right Fixed water supply
Waste water
Changing from waste water drain/waste water tank to drip pan:
If desired, detach the elbow from the hose end on the back of the machine.►
Insert the sealing plug into the drip pan from the inside.►
Changing from drip pan to waste water drain/waste water tank, or vice versa:
Attach the hose to the hose end on the back of the machine using the elbow (see figure shown here).►
Remove the sealing plug from the drip pan.►
Connect the discharge hose to the drain system or hang it into the waste water tank.►
Level 1 Level 2
Adjusting screw behind the water tank
Sealing plug in the drip pan

www.schaerer.com
16 BASCV - EN
Version 02 12.2009
Installation and commissioning
Labeling the buttons
Switch off the coffee machine to avoid accidentally dispensing a beverage.►
Remove the cover at the bottom of the control panel.►
Remove the existing labels from behind the front glass panel by pulling them down and out.►
Download the new label template, label as required and print out.►
Slide the labels back behind the front glass panel.►
The template can be printed out on adhesive labels or on paper.
Glue paper to the label plate using a glue stick.
The label template can be downloaded from www.schaerer.com free of charge. Suitable adhesive labels:
Zweckform-Avery No. 3659.
Deinstallation and disposal
The devices must be disposed of properly, in accordance with local and legal regulations.
Contact your sales partner, if necessary.►

www.schaerer.com
17
BASCV - EN
Version 02 12.2009
Operation
Operation
Check before switching on
Please check the following items before placing the coffee machine in operation:
The fresh water supply is open/the drainage hose is routed correctly.•
The coffee bean hopper(s) is/are filled (see below) and the locking bar is open.•
The coffee grounds container is empty and inserted correctly.•
The coffee machine is connected to the mains power supply.•
Filling
Filling with coffee beans
Danger of injury! Never reach into the bean hopper while the device is switched on.
Danger of clogging! Destruction of grinder! Never ll anything other than coffee beans into the
bean hopper.
Open the cover and detach it from the bean hopper.►
Fill with coffee beans (maximum 1100 g).►
Reattach and close the cover.►
Filling the powder hopper (option)
Danger of injury! Never reach into the powder hopper while the device is switched on.
Danger of clogging! Never ll anything other than powder for automatic operation into the powder
hopper.
Open the cover and detach it from the powder hopper.►
Option 1: Topping
Fill with the required automatic coffee machine powder (maximum 1000 g).►
Option 2: Twin-Topping
The Twin-Topping hopper is subdivided and contains two separate compartments for two different powder
products, e.g. milk powder and chocolate powder. Depending on the powder consistency, different dosing
screws are used. Therefore, it is important to know which screw is on which side when filling with powder.
Fill the required types of automatic coffee machine powder into compartments 1 and 2 of the powder►
hopper (maximum 500 g per compartment).
Reattach and close the cover.►
t is best to label the powder hopper from the very beginning.
Filling with milk/connecting the milk supply (option)
Note the information provided in „Cleaning“ - „HACCP cleaning concept“.
Option 1: Milk Smart
No more than 40 cm should be between the package of milk and the outlet.
Place fresh, pre-cooled milk (3 – 5°C) next to the machine.►
CAUTION!
User at risk!
CAUTION!
Machine at risk!
CAUTION!
User at risk!
CAUTION!
Machine at risk!
Powder hopper with 2 compartments
for Twin-Topping

www.schaerer.com
18 BASCV - EN
Version 02 12.2009
Operation
Insert the milk hose into the milk.►
The milk hose end must be in contact with the bottom of the container!;
Option 2: Cup & Cool/MyFridge
Danger of contamination! Always clean the container thoroughly before lling!
Open the cooler door.►
Remove the milk container and rinse it.►
Fill fresh, pre-cooled milk (3 – 5°C) into the container.►
Place the milk container back into the cooler and close the cooler door.►
Switching on
Press the►button for 5 seconds.
The coffee machine switches on and heats up.;
The „Ready for operation“ main window appears as soon as the coffee machine is ready to dis-;
pense a beverage.
The beverage buttons are lit;.
„Ready for operation“ main window
Warm rinse eld
To deactivate this function, see „Operating options“.
During warm rinsing, the coffee machine pipework is rinsed with warm water. The water warms up the
brewing system after lengthy brewing pauses and ensures that the brewed coffee is at an optimum tem-
perature.
Touch the►field.
Warm rinsing begins.;
This is recommended after a brewing pause of more than 30 minutes, especially before dispensing a cup
of espresso.
Hidden „Menu“ and „Information“ fields
On the „Ready for operation“ display, touch the area with no fields.►
The „Information“ and „Menu“ fields become visible.►
Symbol Description
Information menu
See "'Information' menu" in this chapter.
Selection menu (menu)
See "Programming".
CAUTION!
Machine at risk!
„Ready for operation“ window
with „2nd level“ option
„Ready for operation“ window
without „2nd level“ option

www.schaerer.com
19
BASCV - EN
Version 02 12.2009
Operation
Fault and notice symbols
In the event of a fault, the field is displayed!
Also, the notice symbols for cleaning, descaling, filter change or maintenance are displayed when these
actions become necessary.
Symbol Description
Fault notice
Touch the field.►
The fault message appears.;
Customer care
Carry out the customer care program.►
Touch the symbol.►
The customer care program begins.;
See the supplementary manual entitled "Customer care".
Cleaning
Carry out the cleaning procedure.►
See "Cleaning".
Descaling
Carry out the descaling program.►
See "Descaling".
„Information“ menu
Touch the►field.
The „Information“ menu appears.;
The "Info" main menu contains the following subitems:
Service The "Service" menu contains the following information:
Contact data of the customer service•
Commissioning data•
Next maintenance date•
Software version•
Care The "Care" menu contains the following subitems:
Record (• record of the last cleaning)
Cleaning info (• information on the date of the last cleaning(s))
Descaling info (• information on the date of the last and next descaling procedure)
Calcium filter info, optional (• information on the remaining service life of the calcium filter)
Brewing
time
The "Service" menu contains information on the dispensing times of the beverage dis-
pensed last:
Total dispensing time•
Time between activation of the beverage button and the beginning of the brewing proc-•
ess
Duration of the brewing process•
Time from completion of the brewing process to completion of dispensing of the bever-•
age, including ejection of the coffee puck
Report The "Report" menu contains information on the recorded fault and display messages of the
machine (helpful during telephone support).
Timer The "Timer" menu contains the following information:
Display of the timer status (on/off)•
Display of the next switching time•

www.schaerer.com
20 BASCV - EN
Version 02 12.2009
Operation
Dispensing
Adjusting the outlet height
If a beverage has already been dispensed, the outlet may be hot!
Adjust the outlets to the correct height before dispensing a beverage!
Place the container beneath the beverage outlet.►
Grip the front of the outlet and move it to the desired position (see figure).►
Possible heights: 70 - 180 mm
Shift eld (option)
To deactivate this function, see „Operating options“.
Every beverage button contains a second level and can therefore be assigned with two functions. The shift
field can be used to select the required level.
Level 1 is active by default.
Touch the shift field.►
Level 2 is active; when a beverage button is activated, the beverage stored on level 2 is dispensed.;
Touch the button again.►
Level 1 is active again; when a beverage button is activated, the beverage stored on level 1 is;
dispensed.
Dispensing a coffee beverage
The lit beverage buttons are ready for dispensing beverages.
If the buttons are not lit, this may have various reasons.See „Troubleshooting“.
Place the container beneath the beverage outlet.►
Push the desired beverage button.►
The beverage button flashes while the machine is dispensing the beverage.;
The beverage name and the dispensing progress appear on the display.;
Dispensing the beverage with ground coffee (option)
The manual slot is located at the top center of the coffee machine.
In coffee machines with three product hoppers, the manual slot is only used for inserting a clean-
ing tablet. In this case, ground coffee may not be lled into the slot!
If a beverage is desired that is stored on level 2, level 2 must be selected before the manual slot lid
is opened.
Open the manual slot lid.►
Depending on the desired beverage, fill in the corresponding quantity of ground coffee (maxi-►
mum 15 g).
If the manual slot remains open for a lengthy period, the message "Manual slot time limit exceeded" and
the procedure is aborted.
Close the manual slot lid.►
Place the container beneath the beverage outlet.►
Push the desired beverage button.►
The beverage button flashes while the machine is dispensing the beverage.;
The beverage name and the dispensing progress appear on the display.;
CAUTION!
Hot surface!
Level 1 active.
Level 2 active.
CAUTION!
Machine at risk!