Schwinn IC2 Indoor Cycling Bike User manual

ASSEMBLY MANUAL / OWNER’S MANUAL
Manual en Español Latino Americano:
http://www.schwinnfitness.com

2
Important Safety Instructions - Assembly 3
Safety Warning Labels / Serial Number 4
Specifications 5
Before Assembly 5
Parts 6
Hardware 7
Tools 7
Assembly 8
Leveling the Bike 14
Moving the Bike 14
Important Safety Instructions - Owner’s 15
Features 16
Emergency Stop 17
Console Features 17
Operations 19
Adjustments 19
Workout Mode 20
Pausing or Stopping 20
Service Mode 21
Maintenance 22
Chain Lubrication 24
Replacing the Console Batteries 24
Troubleshooting 25
TABLE OF CONTENTS
Nautilus, Inc., (800) NAUTILUS / [phone], www.NautilusInc.com - Customer Service: North America
[phone], [email protected] | outside U.S. +01-360-859-5180, [email protected] |
Printed in China | © 2011 Nautilus, Inc., All rights reserved. ™ and ® indicate a trademark or registered
trademark. Nautilus, Inc. (www.NautilusInc.com) trademarks include NAUTILUS®, BOWFLEX®, SCHWINN®
and UNIVERSAL® and respective logos. Other trademarks are the property of their respective owners.
To validate warranty support, keep the original proof of purchase and record the following information:
Serial Number __________________________
Date of Purchase ____________________
To register your product warranty , go to: www.SchwinnFitness.com/register
Or call 1 (800) 605–3369.
If you have questions or problems with your product, please call 1 (800) NAUTILUS (628–8458).

3
!This icon means a potentially hazardous situation which, if not avoided, could result in death or
serious injury.
Obey the following warnings:
!Read and understand all warnings on this machine.
Carefully read and understand the Assembly instructions.
• Keepbystandersandchildrenawayfromtheproductyouareassemblingatalltimes.
• Donotinstallthebatteriesintothemachineuntilthetimespeciedintheassemblymanual.
• Donotassemblethismachineoutdoorsorinawetormoistlocation.
• Makesureassemblyisdoneinanappropriateworkspaceawayfromfoottrafcandexposureto
bystanders.
• Somecomponentsofthemachinecanbeheavyorawkward.Useasecondpersonwhendoing
theassemblystepsinvolvingtheseparts.Donotdostepsthatinvolveheavyliftingorawkward
movements on your own.
• Setupthismachineonasolid,level,horizontalsurface.
• Donottrytochangethedesignorfunctionalityofthismachine.Thiscouldcompromisethe
safety of this machine and will void the warranty.
• Ifreplacementpartsarenecessaryuseonlygenuinereplacementpartsandhardwaresuppliedby
Nautilus. Failure to use genuine replacement parts can cause a risk to users, keep the machine
from operating correctly and void the warranty.
• Donotuseuntilthemachinehasbeenfullyassembledandinspectedforcorrectperformancein
accordance with the Manual.
• ReadandunderstandthecompleteManualsuppliedwiththismachinebeforerstuse.Keepthe
Manual for future reference.
• Doallassemblystepsinthesequencegiven.Incorrectassemblycanleadtoinjuryorincorrect
function.
IMPORTANT SAFETY INSTRUCTIONS
— ASSEMBLY

4
SAFETY WARNING LABELS AND
SERIAL NUMBER
•
•
•
•
•
•
250lbs. (113kg).
•
•
•
•
•
•
250lbs. (113kg).

5
SPECIFICATIONS
48.4”
(123cm)
22.2” (56.4cm)
44.5” (113cm)
Before Assembly
Select the area where you are going to set up and operate your machine. For safe operation,
thelocationmustbeonahard,levelsurface.Allowaworkoutareaofaminimum82”x61”
(2.1mx1.5m).
Basic Assembly Tips
Follow these basic points when you assemble your machine:
1. Read and understand the “Important Safety Instructions” before assembly.
2. Collect all the pieces necessary for each assembly step.
3. Using the recommended wrenches, turn the bolts and nuts to the right (clockwise) to tighten,
and the left (counterclockwise) to loosen, unless instructed otherwise.
4. When attaching 2 pieces, lightly lift and look through the bolt holes to help insert the bolt
through the holes.
5.Theassemblyrequires2people.
Maximum User Weight: 250 lbs. (113 kg)
Power Requirements: 2 AA batteries (LR6) - not
included
 OperationalVoltage: 1.0-3.3VDC

6
Item Qty Description Item Qty Description
1 1 Main Frame 7 1 Seat Post
2 1 Front Stabilizer 8 1 Handlebar Post
3 1 Rear Stabilizer 9 1 Handlebar
4 1 Pedal, Right 10 1 Water Bottle Holder
5 1 Pedal, Left 11 1 Console
6 1 Seat
1
2
3
4
5
6
7
8
9
10
11
PARTS

7
Tools
Included Not Included
6 mm
Item Qty Description
A 4 ButtonHeadHexScrewM8x56
B 2 ButtonHeadHexScrewM8x20
C 8 Flat Washer M8
D2 Lock Nut M8
E 2 PanHeadPhillipsScrewM6x50
F 2 Flat Washer M6
(recommended)
HARDWARE / TOOLS

8
1. Attach Stabilizers to Frame Assembly
ASSEMBLY
1
2
3
C
A
A
C
C
D

9
2. Attach Seat to Seat Post and Frame
NOTICE: Slide the Seat (6) onto the Seat Post (7) and install the Seat Post in the Frame. Make
sure the adjustment knob (7a) engages the holes in the Seat Post.
Be sure the Seat is straight. Tighten the bolt (6b) and nut (6c) on the Seat bracket (6a) to
hold the Seat in position.
6a
6b 6c
7a
6
7

10
4. Install Handlebar Assembly on Frame
NOTICE: Make sure the adjustment knob (8a) engages the holes
in the Handlebar Post.
3. Attach Handlebars to Handlebar Post
8
9
B
C
8a