SciCan hydrim c51w User manual

Hydrim®C51w Quick Reference Guide
order number 01-108148S
For best results:
Always use the heavy duty cycle for cassettes, hinged instruments,
heavily soiled instruments and the cannula post adapter.
Do not allow instruments to dry for more than one hour prior to
processing in the Hydrim.
Remove all cement, composite material and amalgam at chairside prior
to processing in the Hydrim.
Do not overload cassettes or baskets with instruments. (Follow the
manufacturer
’ s guidelines.)
Place hinged instruments in baskets, not cassettes.
Do not use any detergent or cleaning agent other than HIP
Hydrim Cleaning Solution. It is not necessary to soak instruments
or cassettes in other detergents prior to placing in the Hydrim.
Place cassettes as indicated, to ensure that fluid fully contacts
instruments and cassettes.
Cycle Regular
Wash
Rinse
and Hold
Heavy Duty
Wash
Description Use for
moderately
soiled loose
instruments.
Use to prevent soil
from drying on
instruments and if
wash cycle is not
immediately desired.
Use for heavily
soiled instruments
or cassettes or
the cannula post.
Temperature
(wash)
50˚C / 122˚F
35˚C / 95˚F 50˚C / 122˚F
Wash / Rinse
Time (min.)
19 min.8 min.
Water
Consumption
17 litres /
4.5 gallons
6 litres /
1.59 gallons
17 litres /
4.5 gallons
22 min.
Rinse &
Hold
Regular
Wash & Dry
Heavy Duty
Wash & Dry
Cycle Complete
Chem. Error
Salt
PANTONE624 C
PANTONE
Cool Grey 5 C
Black
(Cutouts)
(Windows)
Artwork Number: 09-109081 Rev.1.0
Artwork Name:Artwork,fascia, HydrimDry
Artwork created: June29, 2005
Part Numb er92-109082 Rev1.0
Part Name:Label,fascia,Hydrim Dry
Part created by G.G.I
Released by ECO 05-236
August2005
Regular Wash &
Dry
(approx.19min)
Heavy Duty
Wash & Dry
(approx. 22 min)
Rinse & Hold
(approx. 8 min)
Cycle Complete
Indicator
Salt Level
Window
Fault / Error
Cleaning
Solution Low
Caution:
1. HIP Cleaning Solution (Hydrim Cleaning Solution with Instrument
Protection) has been carefully formulated to provide
outstanding material compatibility with a wide range of metals
and coatings. (Some manufacturers’ instruments may not be compatible.)
2. Plastic objects that are not resistant to hot water (65˚C / 149˚F) may not be
suitable.
3. When processing small objects, use the hinged basket (01-108294).
Failure to do so will result in small objects being thrown out of the baskets,
which may cause damage to the machine.

Filter Maintenance:
Inspect the coarse and fine filters daily for debris
and clean if necessary.
1. Grasp the handle in the center of the coarse filter
and turn it 90˚ counter-clockwise.
(To reinsert the coarse filter, turn the
handle clockwise.)
2. Remove the coarse filter.
3. Remove the fine filter.
4. Clean both filters by rinsing them in tap water.
5. Re-assemble, ensuring that the filters are locked in
place.
Wash Arm Maintenance:
Inspect the wash arms weekly for debris and clean if necessary.
1. Open the unit door and remove the wash rack from the unit.
2. Hold the fitting and unscrew the upper wash arm plug.
3. Remove the upper wash arm.
4. Using two hands, grasp both ends of the lower wash arm
on the underside.
5. Pull the lower wash arm upwards.
6. Inspect both sides of the wash arms for debris in the nozzles.
Remove the debris where necessary.
7. Rinse both wash arms with tap water.
8. Reassemble the wash arms.
Refilling the Water Softener
Periodically inspect the salt level window.
If empty, refill as follows:
1. Fill the water softening salt container with water softening salt.
2. Screw the container back into position.
Replacing the Hydrim Cleaning Solution:
When the “cleaning solution low” light is flashing, the Hydrim Cleaning Solution bottle needs to be replaced.
Disconnect the old bottle and
recycle or discard it. Ensure that
the connector is clean and free of
residue. Install a new bottle,
as shown:
For all service and repair inquiries:
United States: 1-800-572-1211, International:49-(0) 821 - 278 93400, Canada: 1-800-870-7777
Email: [email protected]
Hydrim is a registered trademark of SciCan, Division of Lux & Zwingenberger Ltd.
upper wash arm
fitting
coarse filter
water softening
salt container
fine filter
lower wash arm
upper wash
arm plug
lower wash
arm collar
connector
MAX
MIN
P.N. 96-108124 Rev. 5.0