Scion-Tech SC04.1404 User manual

1
4K HDMI Matrix 4x4, HDCP 2.2
Operating Instructions
Dear Customer
Thank you for purchasing this product. For optimum performance and safety,
please read these instructions carefully before connecting, operating or
adjusting this product. Please keep this manual for future reference.
Features
·HDMI 2.0 version (Support HDMI2.0 4K50/60Hz YUV420).
·Resolutions 4K@60Hz, 4K@30Hz, 1080P, 1080i, 720P.
·Supports 3D.
·HDCP 2.2/1.4 compliant.
·4xHDMI Input, 4xHDMI output with SPDIF Audio.
·Allows up to four 4 source devices to be independently switched to 4
HDMI monitors, HDTVs, or projectors.
· Support Panel Button, Local IR, RS232 Control, IP Control Via Telnet.
·1U rack design, easy installment.
Notice
Our company reserves the right to make changes in the hardware, packaging
and any accompanying documentation without prior written notice.
Scion Tech Ltd
SC04.1404

2
Warning
To reduce the risk of fire, electric shock or product damage:
1. Do not expose this apparatus
to rain, moisture, dripping or
splashing and that no objects
filled with liquids, such as vases,
shall be placed on the apparatus.
6. Clean this apparatus
only with dry cloth.
2. Do not install or place this unit
in a bookcase, built-in cabinet or
in another confined space.
Ensure the unit is well ventilated.
3. To prevent risk of electric
shock or fire hazard due to
overheating, do not obstruct
the unit’s ventilation openings
with newspapers, tablecloths,
curtains, and similar items.
4. Do not install near any heat
sources such as radiators, heat
registers, stoves, or other
apparatus (including amplifiers)
that produce heat.
5. Do not place sources of naked
flames, such as lighted candles,
on the unit.
7. Unplug this apparatus
during lightning storms or
when unused for long
periods of time.
8. Protect the power cord
from being walked on or
pinched particularly at
plugs.
9. Only use attachments /
accessories specified by
the manufacturer.
10. Refer all servicing to
qualified service
personnel.

3
TABLE OF CONTENTS
Package Contents
Panel Descriptions
Connecting and Operating
Maintenance
Product service
Warranty
Package Contents
①Main unit. (HDMI Matrix)
②12V3A DC Power Supply.
③1x Remote controller.
④1x IR_RX (IR receiver) extension cable.
⑤Operating Instructions.
⑥2x Mounting Ear.
Specifications
Operating Temperature Range -5 to +35°C(-41 to +95 °F)
Operating Humidity Range 5 to 90 % RH (no condensation)
Input Video Signal 0.5-1.0 volts p-p
Input DDC Signal 5 volts p-p (TTL)
Signaling Rate 3.0Gbit/s
Video Format Supported 4K@60Hz/4k@30Hz/1080P/1080i/720P/576P/480P/
576i/480i
HDCP Compliant HDCP2.2 and HDCP1.4
Output Video HDMI2.0 and HDMI 1.4
Audio Format Supported DTS-HD、Dolby trueHD
Maximum Transmission Distance <15m
Power Consumption 30wtts (Max.)
Dimensions L440xW256xH42mm/ L17.3”xW10”xH1.65”
Mass (Main Unit) 2.1kg
& Note: Specifications are subject to change without notice. Mass and dimensions are
approximate.

4
Panel Descriptions
Front Panel
Rear Panel
①HDMI input port.
②HDMI output port.
③SPDIF Audio output.
④IP control.
⑤RS232 for control.
⑥For IR external receiver cable.
⑦DC power input.
Connecting
1) Connect the HDMI input sources (such as HD-DVD, PS3, STB etc) into
HDMI Matrix.
2) Connect the HDMI outputs (such as HD-LCD, HD-DLP) into HDMI Matrix.
3) Power on the input source you want to show.
4) Connect the power supply into HDMI Matrix and turn on the display you
want to watch.
5) Use remote or push the button to choose input source.
& Attention: Insert / Extract cables gently.

5
Typical Application
Operation:
1. Front panel control.
Change source to output port:
First, press an output number button to choose which output port to
change the source (the input digit above the output port number on LCD
starts to be flash).
Second, press an input number to change the source of the output port to the
selected input.
IR
In 1 In 2 In 3 In 4
Out 1 Out 2 Out 3 Out 4

6
2. Local IR remote control.
You can control the HDMI route of the matrix by using the IR remote.
There are four group key pads for two output ports. For each output port source
selection, there are 4 number keys and two arrow keys. Press number keys to
select specific input port. Left arrow button to backward the input port, and right
arrow to forward input port.
3. IR extender control.
Use the IR receiver cable to change the IR receiver position.
If controlling the HDMI Matrix through the 1/8” (3.5 mm) input jack on the rear
panel, connect the IR cable directly to the matrix rear IR receiver extension
sockets.

7
4. EDID setting.
Pressing and holding input number button for 3 seconds to recall the display
on front LCD panel for EDID setting of this input port.
For example, pressing and holding input number button 3 for 3 seconds will
recall the LCD to display the current EDID setting on input port 3:
Clicking the button In3 will display the next EDID:
When pressing and holding button In3 for 3 seconds will select the EDID
shown on LCD panel.
To copy EDID from out1 to input 3, pressing and holding In3 to
recall the display of EDID setting for input3, click button In3 13 times.
Pressing and holding In3 for 3 seconds, 4x4 matrix will try to read EDID data
from output1 and save it to input3
Below is the list for EDID options.
1：1080P_2CH(PCM)
2：1080P_ audio5.1
3：1080P_ audio7.1
4：1080P_3D_2CH(PCM)
5：1080P_3D_ audio5.1
6：1080P_3D_ audio7.1
7：4K30Hz_3D_2CH(PCM)
8：4K30Hz_3D_ audio5.1
9：4K30Hz_3D_ audio7.1
10：4K60Hz(Y420)_3D_2CH(PCM)

8
11：4K60Hz(Y420)_3D_ audio5.1
12：4K60Hz(Y420)_3D_ audio71
USER EDID 1
USER EDID 2
USER EDID 3
EDID from output1
EDID from output2
EDID from output3
EDID from output4
5. IP control module information shown on LCD panel.
Pressing In3 and In4 simultaneously for 3 seconds, IP setting information will
be shown on front LCD panel.
Other IP setting information will be shown automatically after every 3 seconds.
6. Turn on or turn off DHCP mode.
Pressing In1 and In3 simultaneously for 3 seconds to toggle the DHCP mode.
or
7. Turn on or turn off cascading mode.
When cascading is enabled, the matrix will not read EDID data from sink
device (TV) or hot plug status, it will always output the signal to the sink device
without doing any handshake. This is only when a handshake problem
happens.
When this happens, try this mode to solve the problem.
Press In1 and In2 simultaneously for 3 seconds to toggle on/off the
cascading mode.

9
8. Software Control
1). Connecting a computer to the Matrix using a USB to RS232 cable, open
the software and click Search Machine.
2). You can control HDMI Matrix as shown beow.
3). Set the EDID of 4 HDMI inputs:

10
9. IP Control
1). Click “DHCP”, then the switch will assign IP address automatically. You
can also set the IP address manually.
2). If you set a static IP, you need set the IP of the computer to:-

11
3). Open web browser, and enter the IP address you set.
4). Turn on/off the audio:

12
5). Set the EDID of 4 HDMI inputs:
6). Network config:

13
10. Telnet/RS232 Command Control
1). Open CommUart Assistant.
2). Comport setting:
Baud Rate: 57600 bps
Parity: None
Data Bits: 8 bit
Stop Bits: 1 bit
3). Enter Port Command in Send options.
4). If you need to check the command, enter “>@ RH” and “enter” key,
then click “Send”.

14
MAINTENANCE
Clean this unit with a soft, dry cloth. Never use alcohol, paint thinner of
benzine to clean this unit.
PRODUCT SERVICE
（1）Damage requiring service:
The unit should be serviced by qualified service personnel if:
(a) The DC power supply cord or AC adaptor has been damaged;
(b) Objects or liquids have gotten into the unit;
(c) The unit has been exposed to rain;
(d) The unit does not operate normally or exhibits a marked change in
performance;
The unit has been dropped or the cabinet damaged.
（2）Servicing Personnel: Do not attempt to service the unit beyond that
described in these operating instructions. Refer all other servicing to
authorized servicing personnel.
（3）Replacement parts: When parts need replacing ensure the servicer
uses parts specified by the manufacturer or parts that have the same
characteristics as the original parts. Unauthorized substitutes may result in
fire, electric shock, or other Hazards.
（4）Safety check: After repairs or service, ask the servicer to perform
safety checks to confirm that the unit is in proper working condition.
WARRANTY
If your product does not work properly because of a defect in materials or
workmanship, our Company (referred to as "the warrantor" ) will, for the
length of the period indicated as below, (Parts(2)Year, Labor(90) Days)
which starts with the date of original purchase ("Limited Warranty period"), at
its option either(a) repair your product with new or refurbished parts, or (b)
replace it with a new of a refurbished product. The decision to repair or
replace will be made by the warrantor.
During the "Labor" Limited Warranty period there will be no charge for labor.
During the "Parts" warranty period, there will be no charge for parts. You must

15
mail-in your product during the warranty period. This Limited Warranty is
extended only to the original purchaser and only covers product purchased
as new. A purchase receipt or other proof of original purchase date is
required for Limited Warranty service.
MAIL-IN SERVICE
When shipping the unit carefully pack and send it prepaid, adequately
insured and preferably in the original carton. Include a letter detailing the
complaint and provide a day time phone and/or email address where you can
be reached.
LIMITED WARRANTY LIMITS AND EXCLUSIONS
1.This Limited Warranty ONLY COVERS failures due to defects in materials
or workmanship, and DOES NOT COVER normal wear and tear or cosmetic
damage.
The Limited Warranty ALSO DOES NOT COVER damages which occurred in
shipment, or failures which are caused by products not supplied by warrantor,
or failures which result from accidents, misuse, abuse, neglect, mishandling,
misapplication, alteration, faulty installation, set-up adjustments,
maladjustment of consumer controls, improper maintenance, power line
surge, lightning damage, modification, or service by anyone other than a
Factory Service center or other Authorized Servicer, or damage that is
attributable to acts of God.
2.THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER
"LIMITED WARRANTY COVERAGE". THE WARRANTOR IS NOT LIABLE
FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM
THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF
THIS WARRNTY. (As examples, this excludes damages for lost time, cost of
having someone remove or re-install an installed unit if applicable,
travel to and from the service, loss of or damage to media or images, data or
other recorded content. The items listed are not exclusive, but are for
illustration only.)
3.PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED
WARRANTY, ARE YOUR RESPONSIBILITY.

Scion Tech Ltd
Thatcham, Berkshire, RG18 3DL, United Kingdom
[email protected] Tel: [phone]