Scion-Tech SC36.MX44 User manual

User Manual
Version 1.1a
SC36.MX44
User ManualScion Tech SC36.MX44
Tel: [phone] www.scion-tech.co.uk [email protected]
4 x 3+1 HDMI (HDBaseT) Matrix
18G, 4K/60Hz 4:4:4, HDR

User ManualScion Tech SC36.MX44
Thank you for purchasing this product
For optimum performance and safety, please read these instructions carefully before connecting, operating or
adjusting this product. Please keep this manual for future reference.
The manual is only for operational purposes, please contact a local dealer for maintenance assistance. The
functions described in this version were updated in July 2019. In the constant effort to improve this product, we
reserve the right to make functional or parameter changes without notice or obligation. Please refer to your local
dealer for the latest details.
Surge protection device recommended
This product contains sensitive electrical components that may be damaged by electrical spikes, surges, electric
shock, lighting strikes, etc. Use of surge protection systems is highly recommended in order to protect and extend
the life of your equipment.
FCC Statement
This equipment generates, uses and can radiate radio frequency energy and if not installed and used in
accordance with the instructions may cause harmful interference to radio communications equipment. It has been
tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a commercial
installation.
Any changes or modifications not expressly approved by the manufacture would void the user’s authority to
operate the equipment.
Tel: [phone] www.scion-tech.co.uk [email protected]
F
E
D
E
R
A
L
C
O
M
M
U
N
I
C
A
T
I
O
N
S
C
O
M
M
I
S
S
I
O
N
-
U
S
A
-
F

User ManualScion Tech SC36.MX44
Tel: [phone] www.scion-tech.co.uk [email protected]
Safety Precautions
●Unpack the equipment carefully and save the packaging for possible future use.
●Follow basic safety precautions to reduce the risk of fire, electric shock and personal injury.
●Do not dismantle the housing or modify the enclosure as this may result in electric shock or personal injury.
●Using parts or components not meeting the manufactures specifications may result in damage, deterioration
or malfunction of the device.
●Refer all and any servicing to the manufacturer or local dealer.
●To prevent electric shock, do not expose this device to rain, moisture or install this product near water.
●Do not place items on the product as this may result in overheating.
●Do not open or remove the housing as this may expose you to harmful voltages or electric shock.
●Ensure the product has plenty of ventilation above and below.
●Liquid spillage over or inside the product may result in electric shock and permanent damage. In the event
of spillage remove the power immediately.
●Do not pull or twist the optical cables as this may result in damage to the optical connector.
●Do not use liquid or aerosol cleaners on the product and always remove the power before cleaning.
●Remove the power if the product is going to be left for long periods without use.
●Information on disposal for scrapped devices: do not burn or mix with general household waste and please
treat the product as normal electrical waste.

User ManualScion Tech SC36.MX44
CONTENTS
1.0 Introduction------------------------------------------------------------------------------------ 5
1.1 Key Features-------------------------------------------------------------- 5
1.2 Package Contents------------------------------------------------------- 5
2.0 Specifications---------------------------------------------------------------------------------- 6
3.0 Front Panel Description---------------------------------------------------------------------- 8
4.0 Rear Panel Description----------------------------------------------------------------------- 8
5.0 Receiver Front & Rear Panel Description------------------------------------------------- 9
6.0 Application Drawing------------------------------------------------------------------------- 10
7.0 Front Panel Button Controls----------------------------------------------------------------- 11
7.1 Input Selection----------------------------------------------------------- 11
7.2 EDID Settings------------------------------------------------------------ 11
8.0 IR Remote Control---------------------------------------------------------------------------- 12
9.0 GUI Control (TCP/IP Interface)------------------------------------------------------------ 13
9.1 Signal Switching--------------------------------------------------------- 13
9.2 Audio Settings------------------------------------------------------------ 14
9.3 PoC (Power over Cable) Settings-------------------------------------- 14
9.4 EDID Copy--------------------------------------------------------------- 15
9.5 EDID Setting (integral settings)--------------------------------------- 15
9.6 RS232 Settings and Control-------------------------------------------- 16
9.7 Access Settings----------------------------------------------------------- 16
9.8 Interface Settings -------------------------------------------------------- 17
9.9 Network Settings--------------------------------------------------------- 17
10.0 Maintenance and Warranty------------------------------------------------------------------ 18
Tel: [phone] www.scion-tech.co.uk [email protected]

1. Introduction
The SC36.MX44 matrix is packed with many features and delivers stunning Ultra HD video up to 70m over
CAT5e/6 cable. Each HDMI source and accompanied IR signal can be routed to any display simultaneously.
Outputs include 3 x RJ45 HDBaseT for CAT5e/6 and 1 x local HDMI with extracted analogue and digital audio
outputs.
The receivers are (PoC) powered over the CAT5e/6 cable so there’s no need for additional power adaptors
behind the screens. The receivers can be connected up to 70m from the matrix and still provide zero latency,
4K/60Hz images without requiring any adjustments.
Bi-Directional IR is provided for controlling the source devices from the remote locations and controlling the
screens from the matrix.
Each zone simply selects the required input using the IR remote control provided and then uses the third party
remote control to control the source device. These IR signals are routed with the HDMI signal eliminating any
possibility of controlling two devices at the same time.
The matrix also has local control using either IR, the front panel buttons, RS232 or logging in via a web
browser making it easy to link up with third party smart home controllers such as RTL, Crestron, Control4 and
more.
Our SC36.MX44 matrix supports the latest industry standards including HDMI 2.0, HDCP 2.2, HDR10,
4K/60Hz, YUV 4:4:4 and come with a 2 years manufactures warranty. The package includes 3 x HDBaseT
receivers and all the IR transmit and receiver cables needed to complete your installation.
1.2 Matrix package contents
1. 1 x Main Unit (SC36.MX44)
2. 2 x Rack Mount Ears
3. 4 x IR Emitters
4. 3 x IR Senders cables
5. 1 x IR Remote Control
6. 1 x RS232 Cable (3-Pin Phoenix to DB9)
7. 1 x Power Lead
8. User Manual
Page 5
User ManualScion Tech SC36.MX44
Tel: [phone] www.scion-tech.co.uk [email protected]
Receiver package contents
1. 3 x Receivers (SC36.MX44-RX)
2. 4 x Rack Mount Ear Sets
3. 3 x IR Emitters
4. 3 x IR Senders cables
1.1 Key Features
●18G, 4 x 3+1 HDMI (HDBaseT) Matrix
●HDMI 2.0, HDCP 2.2
●70m Distance over CAT5e/6/7
●4K/60Hz, YCbCr 4:4:4, HDR, HDR10
●LPCM 7.1, Dolby True HD, DTS-HD
Key Features
●Enhanced EDID Management
●Bi-Directional IR
●Extracts analogue and digital audio
●PoC (Receivers powered over CAT5)
●Control: IR, RS232 and TCP/IP

Page 6
User ManualScion Tech SC36.MX44
Tel: [phone] www.scion-tech.co.uk [email protected]
Connections
HDMI Input: 4 x HDMI Type A, 19-Pin Female
HDBaseT Output: 3 x RJ45 Data socket
HDMI Output: 1 x HDMI Type A, 19-Pin Female
Digital Audio Output: 1 x Toslink Optical
Analogue L/R Audio Output: 1 x 5-Pin Phoenix Terminal
Infra-Red Input: 3 x 3.5mm Jack Socket
Infra-Red Output: 4 x 3.5mm Jack Socket
Infra-Red Control: 1 x 3.5mm Jack Socket
RS232 Control: 1 x 3-Pin Phoenix Terminal
TCP/IP Control: 1 x RJ45 Data Socket
Firmware Upgrade: 1 x Mini HDMI
Power: 1 x DC Jack
Signal
Signal Input: HDMI
Standards: HDMI 2.0, HDCP 2.2
Bandwidth: 18Gbps
Video Resolutions: 4K/60Hz, 4:4:4
Colour Space: RGB/YCbCr 4:4:4, YCbCr 4:2:2, YUV 4:2:0, HDR, HDR 10+, DLD, Dolby Vision
Colour Depth: 8/10/12-bit
HDMI Audio: LPCM 7.1, Dolby Atmos™, Dolby True HD™, Dolby Digital™ Plus, DTS: X™, DTS-HD™
Master Audio™ pass through
Toslink Digital Audio: PCM, Dolby Digital, DTS, DTS-HD
L/R Stereo Audio: PCM
Infra-Red: Wide Bandwidth, Frequency 30KHz to 56KHz (940nm)
Cable Lengths
HDMI Input/Output Cable: 4K/60Hz 4:4:4@5m, 4K/60Hz 4:2:0@10m, 1080p/60Hz@15m
CAT5e/6/7 Distance: 4K/60Hz 4:4:4@40m, 1080p/60Hz@70m
Power
Input: 100~240V AC 50/60Hz (AC-DC Power Supply) 24V DC 2.71A
Consumption: 58 Watts
Environment
Operating Temperature: -5° to 55°C
Storage Temperature: -25° to 70°C
Operating Humidity: 10% to 90% RH (no condensation)
Dimensions: (W) 436 x (H) 44 x (D) 237mm
Weight: 1.9kg
Colour: Black
ESD: Human Body - +/-8kV, (air gap discharge) & +/-4kV (contact discharge)
Safety and Emissions: CE, FCC, RoHS
2.0 Specifications
MATRIX

User ManualScion Tech SC36.MX44
Page 7
Tel: [phone] www.scion-tech.co.uk [email protected]
2.1 Specifications
RECEIVER
Connections
CAT5e/6/7 (HDBaseT) Input: 1 x RJ45 Data Socket
HDMI Output: HDMI Type A, 19-Pin Female
Infra-Red Input: 1 x 3.5mm Jack Socket
Infra-Red Output: 1 x 3.5mm Jack Socket
Power: 1 x DC Jack (not required when used with matrix)
Signal
Signal Input: HDBaseT
Standards: HDMI 2.0, HDCP 2.2
Bandwidth: 18Gbps
Video Resolutions: 4K/60Hz, 4:4:4
Colour Space: RGB/YCbCr 4:4:4, YCbCr 4:2:2, YUV 4:2:0, HDR, HDR 10+, DLD, Dolby Vision
Colour Depth: 8/10/12-bit
HDMI Audio: LPCM 7.1, Dolby Atmos™, Dolby True HD™, Dolby Digital™ Plus, DTS: X™, DTS-HD™
Master Audio™ pass through
Toslink Digital Audio: PCM, Dolby Digital, DTS, DTS-HD
L/R Stereo Audio: PCM
Infra-Red: Wide Bandwidth, Frequency 30KHz to 56KHz (940nm)
Cable Lengths
HDMI Input/Output Cable: 4K/60Hz 4:4:4@5m, 4K/60Hz 4:2:0@10m, 1080p/60Hz@15m
CAT5e/6/7 Distance: 4K/60Hz 4:4:4@40m, 1080p/60Hz@70m
Power (not required when used with matrix)
Input: 24V DC 1.25A
Consumption: 9.5 Watts
Environment
Operating Temperature: -0° to 40°C
Storage Temperature: -20° to 60°C
Operating Humidity: 20 to 90% RH (no condensation)
Dimensions: (W) 74 x (D) 120 x ( H) 18
Weight: 235g
Colour: Black
ESD: Human Body - +/-8kV, (air gap discharge) & +/-4kV (contact discharge)
Safety and Emissions: CE, FCC, RoHS

3. Front Panel Description
User ManualScion Tech SC36.MX44
Number Name Function / Description
1 Firmware Micro-USB port for upgrading internal firmware.
2 Power LED Illuminates Red when powered ON.
3 Signal Switching A) Input LED indicator. B) Output button.
4 Preset Recall Press and hold a preset button to store the current status. Quick press to select the preset.
4. Rear Panel Description
Number Name Function / Description
1 Input 4 x HDMI Inputs Type-A Female
2 IR In
3 x 3.5mm jack sockets to connect IR receivers. Each IR input is associated with the
respective HDBaseT receivers output and cannot be switched seperatley. It makes up a Bi-
Directional IR transmission with the IR OUT on the corresponding HDBaseT receiver.
3 IR Eye 1 x 3.5mm jack socket for connecting IR Receiver for local control.
4 IR Out 4 x 3.5mm jack sockets for connecting IR emitters and attaching to IR sensors on source
devices.
5 Outputs 3 x RJ45 HDBaseT, 1 x Type-A HDMI, 1 x SPDIF Digital Audio,1 x 5-Pin Phoenix
Analogue Audio.
6 Control 1 x Terminal block RS232, 1 x RJ45 Data socket TCP/IP and 3-Pole DIP switch for EDID.
7 Power 1 x DC Jack
Page 8
Tel: [phone] www.scion-tech.co.uk [email protected]
34
A
1
PWR
FW
OUTPUT 1
1 2 3 4
2
OUTPUT 2
1 2 3 4
OUTPUT 3
1 2 3 4
OUTPUT 4
1 2 3 4
PRESET RECALL
1 2 3
HOLD TO STORE
B
Tx Rx
INPUTS
12 3
4
1 2 3
EYE
IR IN
IR OUT
1234
HDMI 1
OUTPUTS
HDBT 1 HDBT 2 HDBT 3 SPDIF
+ - + -
L/R TCP/IP RS232 EDID
CONTROL PWR
1
3
4
56
2
7

5. Receiver Front & Rear Panel Description
User ManualScion Tech SC36.MX44
Page 9
Tel: [phone] www.scion-tech.co.uk [email protected]
Number Name Function / Description
1 HDMI Out Type-A female HDMI connector for display connection.
2 IR In 3.5mm Jack socket for IR sender cable. (Pass-Through).
3 IR Out 3.5mm Jack socket for IR emitter cable. (Pass-Through).
4 HDBaseT In RJ45 Data socket. The Link LED illuminates Orange to confirm connection with the Matrix.
The HDCP LED illuminates Green when the signal contains HDCP content.
5 Power LED
Illuminates RED when power is applied by either local PSU or connection to the matrix via the
CAT5e/6 cable. PoC.
6 DC Power 24V DC Input for local power. (Not required when used with matrix).
1 2 3 4 65
HDMI Out IR In IR Out HDBaseT IN
LinkHDCP
Power DC 24V

6. Application Drawing
Page 10
User ManualScion Tech SC36.MX44
Tel: [phone] www.scion-tech.co.uk [email protected]
Multi Room Audio
Ceiling Speakers
Speakers
4 x HDMI Signal Inputs
IR In
IR Out
Local Display
RS232
Ethernet Control
IR Matrix Control
Tx Rx
INPUTS
12 3
4
1 2 3
EYE
IR IN
IR OUT
1234
HDMI 1
OUTPUTS
HDBT 1 HDBT 2 HDBT 3 SPDIF
+ - + -
L/R TCP/IP RS232 EDID
CONTROL PWR
Display
IR Source
Control
IR Out

7. Front Panel Button Control
7.1 Input selection
The matrix can be controlled using the buttons on the front panel. Repeatedly press the the output button to cycle
through the various inputs for the corresponding output. The blue LED’s will cycle when the button is pressed
and settle on the chosen input.
Preset store
Press and hold one of the three available preset buttons to store the current system status.
Preset recall
Momentarily press one of the available preset buttons to recall the stored status.
User ManualScion Tech SC36.MX44
7.2 EDID Setting
The Extended Display Identification Data is used for the source device to match it’s video resolution with the
connected display. By default, the EDID source device is 1080p PCM 2CH. Because displays have different
maximum resolution limitations, the DIP switch can be used to set the EDID using internal data. Use the table
below to set your preferred video resolution. The switch represents “0” when in the lower “OFF” position and
“1” when in the upper “ON” position.
Page 11
Tel: [phone] www.scion-tech.co.uk [email protected]
Switch Status Video Resolution Audio Format
[0000] Default
Use RS232 or TCP/IP for remote EDID management
[0001] 1080P 2CH
[0010] 1080P Multi-CH
[0011] 4K@30Hz HD 2CH
[0100] 4K@30Hz HDR Multi-CH
[0101] 4K@60Hz HDR 2CH
[0110] 4K@60Hz HDR Multi-CH
[0111] User Defined
Note:
●2CH: LPCM 2CH
●Multi-CH: 8CH LPCM, Dolby TrueHD™, DTS-HD, Dolby Digital 5.1™, DTS-5.1, Dolby Digital Plus™.

8. IR Remote Control
Connect the IR receiver cable to the IR EYE port of the matrix and conveniently place the eye in clear sight of
the IR remote control.
User ManualScion Tech SC36.MX44
1. Enter and Exit Standby mode.
2. Indication LED confirmation button selection.
3. Video source selection.
4. Output selection.
5. Menu:
●ALL: Select all inputs or all outputs.
●EDID: Enable one or several input sources to manually capture and
learn the EDID data from the output device.
●CLEAR: Cancel the current operation, providing the enter button has
not been pressed.
●ENTER: Confirm the desired operation.
Note: The IR remote can be used at the matrix and any or all of the
remote receivers.
12
INPUTS
12
3 4
OUTPUTS
12
3 4
MENU
ALL EDID
CLEAR ENTER
3
4
5
Examples
●To set input 3 to output 2 - Press the input 3 button followed by the output 2 button, finally press Enter to
complete the request.
●The set input 1 to outputs 1 & 4 - Press the input 1 button followed by the output 2 and output 4 button,
finally press Enter to complete the request.
●The set input 4 to all outputs - Press the input 4 button followed by the ALL button, finally press Enter to
complete the request.
●To set the EDID for one or more source devices to the EDID capabilities of a specific display/output - Press
the EDID button then press the desired inputs or All button, then press the output button that corresponds to
the display, finally press the Enter button to complete the request.
Page 12
Tel: [phone] www.scion-tech.co.uk [email protected]

User ManualScion Tech SC36.MX44
9. GUI Control
The matrix can be controlled using the TCP/IP interface. The default settings are:
IP Address: 192.168.0.178
Subnet Mask: 255.255.255.0
Type the IP address in to your web browser to enter the log-in page and enter the user name and password.
User Name: admin
Password: admin
9.1 Signal Switching
Switching Audio Configuration Access Interface Network
1-HDBT 2-HDBT 3-HDBT 4-HDMI
Input 1
Input 2
Input 3
Input 4
Preset
12
3 4
56
Save
Recall
RS232
Use the 4 x 4 button grid to to set which inputs are directed to which outputs. For example:- clicking the button
on the Input 1 row and Output 2 column, directs input 1 to output 2.
Use the 9 buttons in the Scene section to save and load presets.
●To save a layout, first click on of the numbered buttons, then click “Save”.
●To load a previously saved layout, first click one of the numbered buttons, then click the “Recall” button.
Page 13
Tel: [phone] www.scion-tech.co.uk [email protected]

User ManualScion Tech SC36.MX44
9.2 Audio Settings
Use the radio buttons to switch on/off the analogue and digital outputs.
Page 14
Tel: [phone] www.scion-tech.co.uk [email protected]
Confirm Cancel
Analogue Audio
AudioSwitching Configuration Access Interface NetworkRS232
Digital Audio
ON OFF
Use the radio buttons to enable or disable the PoC (Power over Cable) function for the CAT5e outputs.
HDBT Output 1
HDBT Output 2
HDBT Output 3
Enable Disable
PoC EDID Copy EDID Setting
Confirm Cancel
ConfigurationSwitching Audio Access Interface NetworkRS232
9.3 Configuration - PoC (Power over Cable)

User ManualScion Tech SC36.MX44
9.4 EDID Copy
Page 15
Tel: [phone] www.scion-tech.co.uk [email protected]
Operation:
1. Select one output port.
2. Select one or several input ports. Press ALL to select all input ports.
3. Click confirm to save or cancel to omit.
Operation:
1. Select one output port.
2. Select one or several input ports. Press ALL to select all input ports.
3. Click confirm to save.
Upload user-defined EDID.
4. Select the user-defined field.
5. Click in the Combi-Box and select a .bin file from your computer.
6. Click confirm to save.
9.5 EDID Setting
PoC EDID Copy EDID Setting
Confirm CancelAll
Output
HDMI 1
HDMI 2
HDMI 3
HDMI 4
HDBT 1
HDBT 2
HDBT 3
HDMI 4
Input
ConfigurationAudio Access Interface NetworkSwitching RS232
1
2
3
4
Embedded EDID
1080P 2CH
HDCP EDID Copy EDID Setting
Confirm Cancel
1080P MultiCH
4K30 HDR 2CH
User-defined
4K30 HDR MultiCH
4K60 HDR 2CH
4K60 HDR MultiCH
Input
All
Apply
Bin
ConfigurationAudio Access Interface NetworkSwitching RS232

User ManualScion Tech SC36.MX44
Page 16
Tel: [phone] www.scion-tech.co.uk [email protected]
9.6 RS232 Control
1. Baud Rate: Supports: 2400, 4800, 9600, 19200, 38400, 57600, 115200
2. Command Ending: NULL, CR, LF or CR+LF can be chosen
3. Command: Type the command in the box to control the third-party device connected to the matrix.
Send
ASCII
HEX
Baud Rate
RS232Audio Access Interface NetworkSwitching Configuration
Command Ending
Command
9600
NULL
xxxxx
9.7 Access Settings
●Reset the administration password.
●Lock and Un-Lock the front panel buttons.
Credentials
Front Panel Lock
Password: admin Confirm
AccessAudio RS232 Interface NetworkSwitching Configuration

User ManualScion Tech SC36.MX44
Page 17
Tel: [phone] www.scion-tech.co.uk [email protected]
●Edit the Title Bar label, LCD readout and button labels.
9.8 Interface Settings
Title Bar Label:
Confirm Cancel
Button Labels:
Input
1: Input 1
2: Input 2
3: Input 3
4: Input 4
1: HDBT 1
2: HDBT 2
3: HDBT 3
4: HDMI 4
Output
InterfaceAudio Access NetworkSwitching RS232Configuration
9.9 Network Settings
●Static IP or Dynamic Host Configuration Protocol (DHCP).
●Modify the static IP Address, Subnet Mask and Gateway.
Interface
MAC Address: 44-33-4C-C9-35-12
Subnet Mask:
DHCP
IP Address: 192.168.0.178
255.255.255.0
Version
GUI : V1.0.0
Firmware : V1.0.0
Confirm
Static IP
Gateway: 192.168.0.1
Audio AccessSwitching RS232Configuration Network

Page 18
10. Maintenance
Clean this unit with a soft, dry cloth. Never use alcohol, pint thinner of benzene to clean these devices.
Servicing
Damage requiring service: This product should be serviced by a qualified service engineer if:
●The DC power cord or AC adaptor has been damaged.
●Objects or liquids have entered the housings.
●The product has been exposed to rain.
●The product has stopped working or shows signs of significant change in operating performance or function.
●The unit has been dropped or severely damaged externally.
Servicing personnel: Do not attempt to service the product beyond that described in these instructions. Refer all
other servicing to authorised serving personnel.
Replacement parts: When parts need replacing ensure the service engineer uses parts specified by the
manufacture or parts that have the same characteristics as the original parts. Unauthorised substitutes may result
in fire, electric shock or other hazards.
Safety check: After a repair or service, ask the engineer to perform safety checks to confirm the product is in
proper working condition.
Warranty
If your product does not work properly because of a defect in materials or workmanship, our Company (referred
to as "the warrantor" ) will , for the length of the period indicated as below, (Parts and labour 2 years) which
starts with the date of original purchase ("Limited Warranty period"), at its option either (a) repair your product
with new or refurbished parts, or (b) replace it with a new of a refurbished product. The decision to repair or
replace will be made by the warrantor.
During the "Labour" Limited Warranty period there will be no charge for labour. During the "Parts" warranty
period, there will be no charge for parts. You must mail-in your product during the warranty period. This
Limited Warranty is extended only to the original purchaser and only covers product purchased as new. A
purchase receipt or other proof of original purchase date is required for Limited Warranty service.
Returning a Product
When shipping the unit carefully pack and send it prepaid, adequately insured and preferably in the original
carton. Include a letter detailing the complaint and provide a day time phone number and/or email address where
you can be reached.
User ManualScion Tech SC36.MX44
Tel: [phone] www.scion-tech.co.uk [email protected]

Page 19
Limited warranty limits and exclusions
This Limited Warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT
COVER normal wear and tear or cosmetic damage. The Limited Warranty ALSO DOES NOT COVER
damages which occurred in shipment, or failures which are caused by products not supplied by warrantor, or
failures which result from accidents, misuse, abuse, neglect, mishandling, misapplication, alteration, faulty
installation, set-up adjustments, maladjustment of consumer controls, improper maintenance, power line surge,
lightning damage, modification, or service by anyone other than a Factory Service centre or other authorized
service engineer, or damage that is attributable to acts of God.
THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER "LIMITED WARRANTY
COVERAGE".THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL
DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH
OF THIS WARRANTY. (As examples, this excludes damages for lost time, cost of having someone remove or
re-install an installed unit if applicable, travel to and from the service, loss of or damage to media or images,
data or other recorded content. The items listed are not exclusive, but are for illustration only).
PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY, ARE YOUR
RESPONSIBILITY. This returns policy does not affect your legal rights. Details of your legal rights are
available from Trading Standards or Citizens Advice Consumer Service.
Scion Tech Limited
Thatcham, Berkshire, United Kingdom
User ManualScion Tech SC36.MX44
Tel: [phone] www.scion-tech.co.uk [email protected]