Sealey AP3MB User manual

INSTRUCTIONS FOR
MOBILE TOOL TROLLEY 3 DRAWER HEAVY-
DUTY IN BLACK OR HI-VIS GREEN
MODEL NO: AP3MB, AP3MHV
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY
9Only use on firm, level, unobstructed surfaces which are capable of supporting the trolley.
8DO NOT overload.
9Apply the brakes when stationary.
8DO NOT stand/ride on the trolley, or allow others to do so.
9Replace or repair damaged parts. Use only recommended parts. Unauthorised parts may be dangerous and will invalidate the warranty.
WARNING! The warnings, cautions and instructions discussed in this instruction manual cannot cover all possible conditions
and situations that may occur. It must be understood that common sense and caution are factors which cannot be built into this
product, but must be applied by the operator.
2. INTRODUCTION
Heavy-duty garage and workshop trolley ideal for a wide range of applications. Features include perforated pegboards on either side of the unit,
a lockable gas sprung top lid and twenty tool storage holes inside the top compartment which allow long tools with a shaft length of up to 390mm
to be stored. Three deep lined, 45kg capacity drawers with ball bearing slides. An internal latch mechanism allows the drawers to be locked/
unlocked from within the top compartment. The large upper compartment allows for larger tools to be stored safely, along with a lower shelf
giving unobstructed access to tools/parts. Heavy-duty side handle with rubberised grip plus two xed and two quick release lockable alloy castor
wheels for controlled manoeuvrability and added style. Supplied with two keys.
3. SPECIFICATION
Model No:................................................... AP3MB/AP3MHV
Overall Size: (W x D x H) .................... 1090 x 650 x 1075mm
Medium Drawer (x2): (W x D x H) .............840 x 555 x 80mm
Large Drawer (x1): (W x D x H)...............840 x 555 x 170mm
Top Compartment: (W x D x H) .................965 x 615 x 80mm
Capacity:............................................................45kg/Drawer
4. ASSEMBLY
4.1. Attach handle to trolley with fixings supplied.
Position as shown in fig.1
AP3MB, AP3MHV | Issue 1 29/03/17
Original Language Version
© Jack Sealey Limited
Refer to
instructions
g.1

NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
Sole UK Distributor, Sealey Group.
Kempson Way, Suffolk Business Park,
Bury St. Edmunds, Suffolk.
IP32 7AR
www.sealey.co.uk
[e-mail]
01284 757500
01284 703534
Environmental Protection
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be
sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment.
When the product becomes completely unserviceable and requires disposal, drain off any fluids (if applicable)
into approved containers and dispose of the product and the fluids according to local regulations.
Parts support is available for this product. To obtain a parts listing and/or diagram,
please log on to www.sealey.co.uk, email [e-mail] or telephone [phone].
AP3MB, AP3MHV | Issue 1 29/03/17
Original Language Version
© Jack Sealey Limited
5. OPERATION
NOTE: Tools not included.
g.2 g.3
g.4 g.5