4 LEVEL MULTI PURPOSE TROLLEY FOR
DIAGNOSTICS
MODEL NO: APDT435
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY
WARNING! Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using this
storage system.
9Locate in a suitable work area.
9Keep the work area clean, uncluttered and ensure there is adequate lighting.
WARNING! Use storage on level and solid ground, preferably concrete.
9Keep the storage system clean and tidy in accordance with good workshop practice.
9Keep children and unauthorised persons away from the work area.
8DO NOT use the storage system for any purpose other than that for which it is designed.
8DO NOT use the storage system outdoors.
8DO NOT place the storage system in a damp or wet location or an area where there is condensation.
8DO NOT clean the storage system with any solvents which may damage the surfaces or the protective coating.
8DO NOT move the storage system when there are items placed inside.
8DO NOT step on the shelves.
8DO NOT overload the storage system.
2. INTRODUCTION
Multi-purpose trolley with 4 shelves. Ideal for diagnostics and general
use around the workshop. Compact in design with tough industrial powder
coating nish. 4 open shelves with 10mm EVA liner on top shelf and a
lockable compartment; makes it suitable for storing laptops, testers, leads
and battery chargers. Easily manoeuvrable with ergonomic side handles
and 2 x front steering swivel castors and 2 x rear xed castors. Supplied
with side tray and paper towel holder. Side peg board panels with work
with the Sealey TTS range of hooks.
3. SPECIFICATION
MODEL NO:.......................................................... APDT435
Overall Size (W x D x H): ................... 435 x 522 x 1178.5mm
APDT435 Issue 1 18/03/2022
Original Language Version
© Jack Sealey Limited
Refer to
instructions
Wear protective
gloves
