Sealey SB565 User manual

SB565 SB765 SB1200
Width: 565mm 765mm 1200mm
Depth: 350mm 350mm 450mm
Height: 320mm 320mm 360mm
Weight: 9.5kg 12.2kg 21.4kg
Manufactured from heavy gauge steel. Supplied flat packed. Quick and
easy to assemble with all nuts and bolts hidden from view once unit is
built up. Enamel finish helps prevent corrosion. Features a cylindrical
lock for added security. Suitable for site, workshop and home use.
CONTENTS
BACK BASE
FRONT
LID
SIDES X 2 LOCK CONTENTS
4 X PVC PLUGS
18 X LOCK NUTS
26 X LOCK NUTS
ASSEMBLY TOOL
4.2.
ATTACH FRONT TO BASE USING FIXED SCREWS AS A GUIDE. DO
NOT OVERTIGHTEN
FIXED SCREW
4.1.
ATTACH BACK PANEL TO
BASE USING FIXED
SCREWS AS A GUIDE. DO
NOT OVERTIGHTEN
INSTRUCTIONS FOR:
STEEL STORAGE CHEST
MODEL NO'S: SB565, SB765 & SB1200
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY
AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE
WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and
properly maintained, give you years of trouble free performance.
1. SAFETY
2. INTRODUCTION
3. SPECIFICATION
4. ASSEMBLY
Refer to
instruction
manual
1.1 GENERAL SAFETY
 WARNING! Ensure Health & Safety, local authority, and general
workshop practice regulations are adhered to when using this
cabinet.
 WARNING! Use caution when handling and assembling the metal
components. The metal may have sharp edges or corners, the use of
protective gloves is recommended.
 Keep the work area clean, uncluttered and ensure there is
adequate lighting.
Keep children and unauthorised persons away from the working
area.
 DO NOT use the cabinet for any purpose other than that for which
it is designed.
 WARNING! The warnings, cautions and instructions referred to in this
instruction manual cannot cover all possible conditions and situations
that may occur. It must be understood that common sense and caution
are factors which cannot be built into this product, but must be applied
by the operator.
SB565, SB765, SB1200 Issue: 5 (S) - 07/04/17
Original Language Version
© Jack Sealey Limited

4.4.
ATTACH LID USING FIXED SCREWS AS A GUIDE. DO NOT
OVERTIGHTEN
4.5.
ONCE BOX IS
ASSEMBLED INSERT
PVC PLUGS INTO
EACH OF THE CORNER
HOLES
STEP 2
INSERT LOCK INTO HOLE PROVIDED STEP 3
ATTACH RETENTION CLIP TO REAR OF LOCK
STEP 4
SCREW LATCH ONTO LOCK BARREL
4.6. LOCK ASSEMBLY. STEP 1
DISASSEMBLE LOCK (UNSCREW)
4.3.
ATTACH BOTH SIDES USING FIXED SCREWS AS A GUIDE. DO
NOT OVERTIGHTEN
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
01284 757500
01284 703534
[e-mail]
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park,
Bury St. Edmunds, Suffolk,
IP32 7AR
www.sealey.co.uk
Environmental Protection
Recycle unwanted materials instead of disposing of
them as waste. All tools, accessories and packaging
should be sorted, taken to a recycling centre and
disposed of in a manner which is compatible with the
environment.
When the product becomes completely unserviceable
and requires disposal, dispose of the product according
to local regulations.
SB565, SB765, SB1200 Issue: 5 (S) - 07/04/17
Original Language Version
© Jack Sealey Limited
Parts support is available for this product. To obtain a parts listing
and/or diagram, please log on to www.sealey.co.uk, email:
[e-mail] or telephone [phone].