Sealey LED091 User manual

1W SMD LED PENLIGHT 9-IN-1 MULTI-TOOL
MODEL NO: LED091
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY
9Inspect the unit for wear and damage to ensure items are safe before use or inserting a battery. If worn or damaged DO NOT use.
8DO NOT shine lamp directly into your, another person’s or an animal’s eyes.
8DO NOT use the lamp if you suspect that the battery or the lamp casing is damaged.
8DO NOT expose to temperatures above 60°C (140°F).
2. INTRODUCTION
Produces bright white light from single 1W SMD LED. Sliding action light focus can be adjusted from spotlight to wide area. Strobe light
function for emergencies. Multi-tool function includes Phillips screwdriver, slotted screwdriver, bottle opener, whistle, ball pen and safety
hammer. Ideal for storing in glove box. Includes 3 x LR44 batteries (supplied).
3. SPECIFICATION
Model No.: ................................................................ LED091
Batteries:..................................................................3 x LR44
LED Type: ........................................................ 1W SMD LED
Lumen Output: ..............................................Up to 30 Lumen
Operating Time: .............................................................2.5hr
4. CONTENTS
5. OPERATION
5.1. BATTERIES
5.1.1. Beforerstuse,unscrewthebatterycompartmentandremovethelmlayersseparatingthebatteriesfromtheterminal.
5.2. LIGHT MODES
5.2.1. PresstheOn/O󰀨button(g.1.7)oncetoturntheLEDon.Pressoncemoretostartstrobefunction.PressoncemoretoturnLEDo󰀨.
5.2.2.` Toadjustfocus,slidethelenscollar(g.1.7)eitherforwardsorbackwards.
5.3. ` SCREW DRIVER FUNCTION
5.3.1. UnscrewtheBitHousing(g.1.4)fromitsmatingparts.SwaptheScrewDriverBit(g.1.3)touseeitherslotorcrossheadend.
LED091 Issue 1 09/06/21
Original Language Version
©JackSealeyLimited
Refer to
instructions
Item Description
1Safety Hammer Cap
2Safety Hammer / Bottle Opener
3Screw Driver Bit
4Bit Housing
5Whistle
6Pen
7Removable pen clip
8On/O󰀨/ModeSwitch,LightFocusSlider,BatteryCompartment
g.1
1234 5 68
7

Original Language Version
©JackSealeyLimited
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500 01284 703534 [e-mail] www.sealey.co.uk
ENVIRONMENT PROTECTION
Recycleunwantedmaterialsinsteadofdisposingofthemaswaste.Alltools,accessoriesandpackagingshouldbesorted,takento
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
WEEE REGULATIONS
DisposeofthisproductattheendofitsworkinglifeincompliancewiththeEUDirectiveonWasteElectricalandElectronicEquipment
(WEEE). When the product is no longer required, it must be disposed of in an environmentally protective way. Contact your local solid
waste authority for recycling information.
BATTERY REMOVAL
UndertheWasteBatteriesandAccumulatorsRegulations2009,JackSealeyLtdarerequiredtoinformpotentialpurchasersofproducts
containingbatteries(asdefinedwithintheseregulations),thattheyareregisteredwithValpak’sregisteredcompliancescheme.Jack
SealeyLtdBatteriesProducerRegistrationNumber(BPRN)isBPRN00705.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
LED091 Issue 1 09/06/21