Rapid Racking Rapid shelf plan User manual

Rapid shelf plan
Assembly instruction
AIS007

If you have any problems whatsoever please call 01285 686868 where a team of experts will be pleased to help.
RAPID SHELF PLAN Multiple packages
IMPORTANT - ASSEMBLY INSTRUCTIONS
AIS007
1Join both ends from Awith beams Cat the
selected levels. Fix beams Cin place with the
beam locking hooks F, 2 per beam.
2Insert beam tie strap H with the centre of each
level.
3Place the chipboard shelf Eor the galvanized
decking Ginto the beam levels.
4For garment hanging rails D, place them at
the selected levels and fix with beam locking
hooks F.
5We recommend the system is fixed to the floor
with the anchors provided.
NB: This shelving system is not designed
to be loaded by mechanical means, e.g. fork
lift truck. Always load and unload by hand.
ASSEMBLY
A
Also available 2 Level Garment Bays
Also available with
galvanized decking
A
D
C
C
E
E
G
B
F
Tools required:
Rubber mallet, electric drill and
metric spanners
We advise the use of
protective gloves and
goggles, or eyeglasses
when assembling this
product.
H
H

If you have any problems whatsoever please call 01285 686868 where a team of experts will be pleased to help.
Upright frames
1800mm, 2400mm or 3000mm - 2 of
COMPONENTS
RAPID SHELF PLAN Multiple packages
IMPORTANT - ASSEMBLY INSTRUCTIONS
AIS007
A
Keep heavier items
on the bottom shelves
Do not climb
on your shelving
Make sure it is on a
level and even floor
Keep your
shelving dry
SAFETY
CFront and rear beams
1200mm, 1800mm or 2400mm
1 of per level
DGarment rails
1800mm or 2400mm - 4 of
1 pair per level
EChipboard shelves
FBeam locking
bolts
GGalvanized shelf
1 of per shelf level, width
and depth to suit
BFloor fixing anchors
HBeam tie straps
4 of per level - 1200mm
6 of per level - 1800mm
8 of per level - 2400mm
Depth to suit
Option for
1 tonne
Option for over
1 tonne