Seeley MagIQtouch User manual

OWNER’S MANUAL
MagIQtouch Controller
Original English Instructions

Hello and congratulations on purchasing
a MagIQtouch Controller for your home!
The MagIQtouch Controller is a versatile and intelligent Controller
that can be used with a range of products from Seeley International.
Please refer to the relevant sections in this manual as well as
the owner’s manual provided with each of your products for
information on how to set-up and operate your system.

MAGIQTOUCH CONTROLLER OWNER’S MANUAL |1
TABLE OF CONTENTS
GENERAL TIPS 2
QUICK REFERENCE 3
QUICK START 4
OPERATION 10
Navigation 10
Manual Mode 11
Appliance Mode 14
Program Mode 15
SETTINGS MENU 23
General Menu 25
Cooler & Heater Menus 26
Service Menu 29
WARNINGS & SERVICE MESSAGES 30
SLAVE CONTROLLERS 32
TROUBLE SHOOTING 33
POWER OUTAGES 33

2 |
• Mount the MagIQtouch Controller in a room you want climate
controlled. Ideally it should be positioned 1.5m (5’) from the oor
and away from any other heating or cooling sources.
• Ensure the MagIQtouch Controller is not exposed to direct
sunlight as this will impact the temperature reading.
• Avoid blocking or restricting the vent holes located in the side
of the MagIQtouch Controller, as this is where the thermostat is
located.
• Do not use harsh chemical cleaners to clean the touch screen.
For best results use distilled water or a touchscreen specic
cleaning agent with a microbre cloth.
GENERAL TIPS

MAGIQTOUCH CONTROLLER OWNER’S MANUAL |3
QUICK REFERENCE
Here’s a brief visual guide to the main features of your
wall controller.
System On/O Time Date
External / Internal “Live” Temperatures
(External Temperature Is Only Available
If An External Sensor Is Fitted To Your
System)
Decrease
Temp or
Fan Speed
Thermostatic
Mode
Primary Modes
(This will dier
depending
on your
installation)
Set Temp or
Fan Speed
Increase or
Decrease
Temp or
Fan Speed
Select Thermostatic or
Fan Speed Control
(Evap Coolers Only)
Select Automated
Times for Appliances
to Turn On or O
Optimise
your Wall
Control and
System
Fan Speed Control
(Overrides
Thermostatic
Control)

4 |
ILL1521-C
ILL1522-C
QUICK START
Here’s a brief visual guide to get you started quickly!
Continue reading for detailed instructions.
STEP 1
Activate screen.

MAGIQTOUCH CONTROLLER OWNER’S MANUAL |5
ILL1523-C
ILL1524-C
QUICK START cont
STEP 2
Select mode from lower taskbar.

6 |
ILL1525-C
ILL1526-C
QUICK START cont
STEP 3
Turn on cooler or heater.

MAGIQTOUCH CONTROLLER OWNER’S MANUAL |7
ILL1527-C
ILL1528-C
QUICK START cont
STEP 4
Set desired temperature.

8 |
ILL2413-A
ILL2414-A
STEP 5
Switch between thermostatic control to fan speed control.
(Evaporative coolers only)
Note: When in thermostatic mode the fan speed automatically
adjusts to achieve set temperature.
QUICK START cont

MAGIQTOUCH CONTROLLER OWNER’S MANUAL |9
ILL1531-C
ILL1532-C
QUICK START cont
STEP 6
Access wall control and system settings in the SETTINGS menu.

10 |
ILL1535-A
OPERATION
NAVIGATION
There are a few things you might need to know in order to navigate
your new MagIQtouch Controller.
The following section outlines some of the sliders and buttons you
will need to use.
Press mode option buttons:
Make your selection(s):
ILL1541-B
ILL1537-A

MAGIQTOUCH CONTROLLER OWNER’S MANUAL |11
ILL1538-B
ILL1539-A
ILL1544-C
OPERATION cont
The header is the top section of your screen. This is where,
most importantly, you’ll nd the on/o󰀨 button for your system.
The lower taskbar is the section at the bottom of the screen. This
is where you’ll be able to select your primary mode (cool, heat or
fan only). Just be aware that you’ll only see icons that are relevant
to your installation as the MagIQtouch Controller knows what it’s
attached to.
MANUAL MODE
An evaporative cooler running in Manual TEMP mode will try to
maintain the temperature you want by speeding up or slowing
down the fan.

12 |
ILL1895-B
OPERATION cont
Alternatively, using Manual SPEED mode, you can choose to
disregard the room temperature and keep the cooler running at a
constant fan speed.
Gas ducted heaters and add-on coolers, however, work di󰀨erently.
They operate in thermostatic mode and the room fan speed can be
limited using the “SET FAN SPEED” option in the Heater system
settings.
ILL2415-A

MAGIQTOUCH CONTROLLER OWNER’S MANUAL |13
“SET FAN SPEED” in Heater SETTINGS.
OPERATION cont
ILL2420-A
Adjust speed.
ILL2421-A

14 |
APPLIANCE MODE
While your appliance is running in ‘Temp’ mode, the set
temperature reading may change colour highlighting the current
status of the appliance.
OPERATION cont
Appliance
Status
Evap Cooler Ducted Gas
Heater
Add-on Cooler
Appliance: ON
Fan: ON
Water: ON
Appliance: ON
Fan: ON
Compressor: ON
Appliance: ON
Fan: ON
Gas: ON
Appliance: ON
Fan: ON
Water: OFF
Appliance: ON
Fan: ON
Gas: OFF
Appliance: ON
Fan: ON
Compressor: OFF
Appliance: ON
Fan: OFF
Water: OFF
(Thermostatic
temp achieved)
Appliance: ON
Fan: OFF
Gas: OFF
(Thermostatic temp
achieved)
Appliance: ON
Fan: OFF
Compressor: OFF
(Thermostatic temp
achieved)

MAGIQTOUCH CONTROLLER OWNER’S MANUAL |15
ILL1546-B
OPERATION cont
PROGRAM MODE
If you like routine and want to “set and forget” a seven day program
that suits your lifestyle, activate PROGRAM mode.
PROGRAM mode divides each day into four time periods. You
decide when each of these periods begins and what you want your
system to be doing.

16 |
ILL1547-B
ILL1548-B
OPERATION cont
PROGRAM MODE cont
Program mode is exible.
If you leave or arrive home early, you can easily skip forward to the
next period. The program will take over again once the next time
period begins.

MAGIQTOUCH CONTROLLER OWNER’S MANUAL |17
ILL1549-C
ILL1550-C
OPERATION cont
PROGRAM MODE cont
Or perhaps you want to make the temperature higher without
permanently changing your program. The OVERRIDE button will
allow you to temporarily change what’s been set by the program
until the next time period begins.
To set up a program rst press the EDIT button on the PROGRAM
home screen.

18 |
ILL1551-A
ILL1552-A
PROGRAM MODE cont
This will take you to a program overview screen where you can tap
each day to see what’s been set.
OPERATION cont