LTPH245
Model
+0
-1
LTPH245
Method
Number of dots/line
Resolution(dots/mm)
Paper width(mm)
Printing width(mm)
Speed(mm/sec)max
Paper path
Head temperature
Platen position detection
Out of paper detection
Operation voltage(Vdd)
Operation voltage(Vp)
Head
Motor
Pulse activation(pulse)
Abrasion resistance(km)
Printing
Detection
Power supply(V)
Peak current(A)
Service life
Operating temperature(˚C)
Dimensions(W x D x H mm)
Mass(g)
Thermal line dot printing
384
8
58
48
62.5
Curved
By thermistor
By mechanical switch
By photo interrupter
4.5 to 5.5
4.2 to 8.5
2.7 (8.5V / 64 dots)
0.46
100 million
50 *1
-30 to 70
76.8 x 38.0 x 16.0 *2
Approx.46
*1Use recommended thermal papers *2Excluding protrusion
*1Use recommended thermal papers
Optional Font
Downloaded Character
User-defined Character
Extend Graphics Character set
Katakana Character set
JIS 1&2 level Kanji
Interface
Auto Cutter
Cutting
Operating
Voltage(V)
Starting current(A)
Life(cut)
Dimensions(W x D x H mm)
Mass(g)
ACUH205A
Circular type
58
60 to 80 *1
Partial cut
(Right side single edge point remained)
0.8(operating voltage 5.0V. 25˚C)
20
4.2 to 8.5
4.5 to 5.5
1.26(6V on)
500,000
91.0 x 47.6 x 12.7
Approx.46
Method
Paper width(mm)
Paper thickness(μm)
Cutting type
Operating time(sec/cycle)max
Cut frequency(cut/min)max
Motor
Detector(control switch)
CPU
Package form
Operating voltage(V)
Operating frequency(MHz)
Configuration
Communication interface
Character type
Character matrix
(H x W dots)
Dimensions(W x D x H mm)
PTH01P02
80pin QFP
Vp:4.2 to 8.5, Vcc: 4.5 to 5.5
5 +/- 0.5%
C-MOS LSI
Parallel, Serial
Extended graphics character set,
Other characters is available with CGs*1or external ROM
16dots characters : 16 x 8, 16 x 16
24dots characters : 24 x 12, 24 x 24
17.2 x 17.2 x 1.7
Model
Model
Model
*1CG ROM: Japanese, Korean
CPU
Operating Voltage(V)
Character matrix(H x W dots)
Character type
Communication interface
Dimensions(W x D x H mm)
IFH002-01B
Yes
Yes
Yes
Yes
No
No
IFH002-01BK
Yes
Yes
Yes
Yes
Yes
Yes
PTH01P02
Vp:4.2 to 8.5, Vcc: 4.5 to 5.5
16 dots characters : 16 x 8, 16 x 16 24 dots characters : 24 x 12, 24 x 24
Parallel, Serial(C-MOS)
70.0 x 70.0 x 11.3
Max printing speed: 62.5mm/sec
Easy paper operation
Platen latch function
Operating temperature: -30˚C to 70˚C
Thermal Printer Mechanism
EFT/POS
CARD
Measuring
Instrument
Portable
Printer
POS/ECR
+0
-1
LTPH245 (Platen is released)
Low
Voltage
Thermal Printer
Easy Paper Operation Mechanism
Low Voltage24VoltSerial PrinterMobile PrinterPanel-Mount
Printer Unit
Sub-assembled
Printer Unit
Other Models
Line up
Safety Precautions
Standalone
Printer Unit
8
Low Voltage24VoltMobile PrinterStandalone
Printer Unit
Sub-assembled
Printer Unit
Other Models
Line up
Safety Precautions
Panel-Mount
Printer Unit
thermal_printer_E.indd 8thermal_printer_E.indd 8 22.04.2008 16:02:08 Uhr22.04.2008 16:02:08 Uhr
