Seitron N-VO User manual

FEATURES:
- Flue gas analysis & Real-time data graph display
- Calculatingstackheatlossandeciency
- Ambient CO measurement
- Measuring differential pressure
- Draft measurement
- Pressure measurement in the gas supply pipe
- Tightness test
- Black smoke test and average value calculation
- QR code display visualization in order to download the data of the acquired measurements
- Ticket printing with the measurements data using built-in printer (if provided) or using the optional Bluetooth®
printer
Seitron respects the nature and the environment, therefore provides this quick user guide
of the Novo analyzer.
You can download the PC software “CHEMIST SMART ANALYSIS” and the complete user and
maintenance manual from our website www.seitron.com.
Respect your environment: think before printing the full manual on paper.
Quick Guide
WARNING!
The magnets in the back of the instrument can damage credit cards, hard driver, mechanical watches,
pacemakers,debrillatorsandotherdevicesprovensensitivetomagneticelds.
Itisrecommendedtokeeptheinstrumentatadistanceofatleast25cmawayfromthesedevices.
SeitronS.p.A.asociounico
Via del Commercio, 9/11 - 36065 - MUSSOLENTE (VI) ITALY
Tel.0424.567842-[email protected]-www.seitron.com
J100000000SE 042063 070923
Combustion analyzer
Compliantwith:EN50379-1,EN50379-2
NUOVO
1Congurationofthemainanalysisparameters.
2
Acquirescurrentmeasure.
or
Startsthecombustionanalysisaccordingtothesetparameters.
3
TIMEELAPSED:Timeelapsedfromthelastacquiredmeasure.
Runningn°-:itisthenumberofacquiredmeasures.
or
TIMELEFT:Timeleftfortheacquisitionofanewsample.
or
LASTANALYSIS:Dateandtimeofthelastanalysisperformed.
4Puts on hold the current combustion analysis.
5Interruptstheanalysisandgoesbacktostartingphase.
6Storestheacquiredmeasures.
7 ShowsonthedisplaytheQRcoderelatedtotheperformedanalysis.
8Startsthecurrentanalysisprintingphase,accordingtotheprintingsettingsaccessiblefromhomepage.
9turnson/offthesmokepump.
Ifthesmokepumpisoff,thecurrentmeasuresrefreshisstopped.
10
Graphicalrepresentationofvaluesinrealtime.Whentheindicatormovestothegreenarea,thevalue
isoptimalforgoodcombustion.Theoperatorcanvisuallycheckthe4valuesrepresentedatthesame
time,makingnecessaryadjustmentstotheequipment.
The displayed measurements are xed and cannot be changed by the user.
11 Buttontoselect,throughamenu,thetypeofequipmentinuse.
For more details on the PRO analysis screen, see the full manual.
COMBUSTION ANALYSIS
453 9 1 26
7 8 10 11
Live Action
PRO MODE

OPERATION
INSTRUMENT
CONDITION ACTION FUNCTION
OFF (powered off)
Press and hold the key
indicated by the arrow for a
longtime(>3sec.)
The instrument powers on* and
starts the automatic auto zero
phase
ON (powered on)
Press and hold the key
indicated by the arrow for a
longtime(>3sec.)
The instrument turns off after
completing the cleaning cycle for
thesettime.
*: At the rst start, the instrument will guide the user step by step to the rst conguration.
4
1Performs the complete combustion analysis; moreover, it access the analysis conguration menu; the
user can set each single parameter of the instrument to perform the combustion analysis.
2Enters the Operator menu; it is possible to select the name of the operator performing the analysis, which
will be printed on the analysis report.
3Access the Measurements menu; the user accesses all the accessory measurements that the instrument
can perform.
4 Accessthecongurationmenu; the user can set the different reference parameters of the instrument.
5AccessesthePrintmenu.
6Access the Archive menu; the user displays the measurements stored in the memory.
1
5
2
6
3
POWER ON / POWER OFF
MAIN MENUS
The suggested connections are used for the following measures:
- O2
- Gas : CO - NO - SO2 - CxHy - NO2 - H2 - CO2- NH3
-Eciencycalculation
- Combustion analysis
- Simultaneous measurement of gas pressure at the burner
BLUETOOTH® PRINTER ASSOCIATION (PAIRING)
*
AASA08
AJ TB01
(Pressure hose)
AJ SJ01
AJ PT--
AJ KA02
* Between these inputs and the
smoke probe there can be
up to a maximum of three
extension cords, with a total
lengthof3meterseach.
In order to pair the Bluetooth®printer with the instrument, access the “Pairing”
parameter accessible via the Print menu and proceed as follows:
1Once in the Print menu, enable the external printer.
2 Turn on the Bluetooth®printer to be paired with the instrument.
3AccessthePairingBTparameter.
4Wait 10 s and select the line corresponding to the MAC address of the
Bluetooth®printer to pair.
5The instrument automatically associates the selected printer. The analyzer
does not give any message.
6Return to the previous screen.
ATTENTION!
- It is possible to pair multiple Bluetooth®printerswiththeinstrument.
- If you have multiple Bluetooth®printers associated with the instrument, you
mustselecttheprinterthatwillbeusedtoprintthetickets.