Sena 30K User manual

MOTORCYCLE BLUETOOTH®
COMMUNICATION SYSTEM
WITH MESH INTERCOM™
2.0.2
30K

RIDE CONNECTED
The 30K features Sena’s Mesh Intercom
technology allowing your group to seamlessly
communicate, even if a rider falls out of range.
With more connections and Mesh Intercom™
technology, the 30K is the next generation of
communication.
Mesh Intercom™
up to 2 km
(1.2 miles)*
Bluetooth
®
4.1
Audio
Multitasking™
Multi-Way
Intercom
Intercom up to
2 km (1.2 miles)*
Advanced Noise
Control™
Group Intercom Remote Control
FM Radio
* in open terrain

GETTING STARTED
1. This product comes with a Quick Start
Guide, which is a basic version of the User’s
Guide. A FULL VERSION OF THE USER’S
GUIDE CAN BE DOWNLOADED AT
SENA.COM.
2. Update this product for free with the latest
firmware to fully enjoy the new advanced
features built into this product. Visit
sena.com to see how to update your
product.
3. Users can follow Sena on Facebook,
YouTube, Twitter and Instagram to
receive the most up to date information
on products, helpful tips and all other
announcements regarding Sena products.
GETTING STARTED
SENA Technologies, Inc.
sena.com
Customer Support: support.sena.com
30K

GETTING STARTED
How to Use This Guide
The legend and callouts are here to help you read the
illustrations. New technology can be confusing, but we’ve
created a simple way to perform actions using illustrations.
P1s
HOLD
Function = Button(s) to Tap or Hold
=
Buttons
Ambient Mode Button
Mesh Intercom Button
Phone Button
Jog Dial
M
P
A

GETTING STARTED
10s
HOLD
1x
TAP
ROTATE
L
ROTATE
L
ROTATE
R
ROTATE
R
ROTATE
ROTATE
Tap button/Jog Dial
the specified number
of times
Rotate Jog Dial clockwise (right) or
counterclockwise (left).
Rotate while Pressing Jog Dial
clockwise (right) or counterclockwise (left).
Icon Legend
Press and Hold button/
Jog Dial for the specified
amount of time
Audible prompt from
the Bluetooth Module
“Hello”

Product Details
Mesh Intercom Antenna Mesh Intercom Button
Status LED
Bluetooth
Antenna
Ambient Mode Button
Phone Button
Jog Dial
DC Power Charging &
Firmware Upgrade Port
QUICK START GUIDE
QUICK START GUIDE
30K

Installation
1
3
2
4
Mesh Intercom Antenna
Pull the Mesh Intercom
Antenna outwards slightly to
unfold it.
QUICK START GUIDE
1
2

Sena 30K Utility App
By simply pairing your phone with your headset, you can
use the Sena 30K Utility App for quicker and easier set
up and management.
• App Features
- Mesh Intercom, Bluetooth Intercom, Music, FM Radio,
Device settings, Quick Start Guide, and User’s Guide.
• Download
- Android: Google Play Store > ‘Sena 30K Utility’
- iOS: App Store > ‘Sena 30K Utility’
Sena Device Manager
The Sena Device Manager allows you to upgrade the
firmware and configure its settings directly from your PC
or Apple computer. Download the Sena Device Manager
from sena.com.
QUICK START GUIDE

Basic Operations
PP
ROTATE
L
ROTATE
R
1x
TAP
1s
HOLD
Powering On Powering Off
==
POWER
ON
POWER
OFF
Volume Up Volume Down
= =
VOLUME
UP
VOLUME
DOWN
Checking the Battery Level
Instruction is for when powering the headset on.
P1s
HOLD
Visual Method
=
VISUAL
METHOD
=
HIGH
=
MED
=
LOW
QUICK START GUIDE

QUICK START GUIDE
Pairing When the 30K is
Turned Off
Press and hold the Phone
Button and Jog Dial for
10 seconds when the 30K
is turned off.
=P10s
HOLD
“Phone pairing”
=
Alternating blue
and red flashing
lights indicate
device is now
discoverable.
LED
STATUS
=
PIN
NUMBER
Pairing When the 30K is
Turned On
Press and hold the Phone
Button for 5 seconds
when the 30K is turned on.
=P5s
HOLD
“Phone pairing”
=
Alternating blue
and red flashing
lights indicate
device is now
discoverable.
LED
STATUS
=
PIN
NUMBER
Phone Pairing
There are two ways to pair the phone.

Mobile Phone
P
P
P
1x
TAP
2s
HOLD
Answer a Call Reject a call
ANSWER REJECT
==
Make Call with
Voice Dialer
VOICE
DIAL
=
1x
TAP
or
2s
HOLD
End a Call
END
=
1x
TAP
or
Music Controls
ROTATE
R
ROTATE
L
1s
HOLD
Play/Pause Track forward
Track backward
= =
=
“[Beep, Beep]”
QUICK START GUIDE

QUICK START GUIDE
Mesh Intercom™
When Mesh Intercom is enabled, the 30K will automatically
connect to nearby 30K users and allow them to talk to each
other by pressing the Mesh Intercom Button.
Mesh Intercom On
=M1x
TAP
“Mesh intercom on”
Note: Open Mesh and Group Mesh cannot
communicate with the previous modes Public Mode
and Private Mode. In case of no communication, the
headset should be upgraded to the latest firmware.
Mesh Intercom Off
=M1x
TAP
“Mesh intercom Off”

Open Mesh™
When Mesh Intercom is enabled, the headset will be in
Open Mesh (default: channel 1) initially. Users can freely
communicate with each other in the same Open Mesh
channel.
Channel Setting (Default: channel 1)
If the Open Mesh communication experiences
interference because other groups are also using channel
1 (default), change the channel. You can select from
channels 1 to 9.
QUICK START GUIDE

Enter into the Channel Setting
=
M
2x
TAP
“Channel setting, 1”
Navigate between Channels
(1 2 ••• 8 9 Exit 1 •••)
=
ROTATE
Ror =
ROTATE
L
“#”
Save the Channel
=1x
TAP
“Channel is set, channel #”
Note: To exit the Channel Setting, rotate the Jog Dial
clockwise or counterclockwise until you hear a voice
prompt, “Exit”, and tap the Jog Dial.
QUICK START GUIDE

QUICK START GUIDE
Group Mesh™
Group Mesh is a closed group intercom function that
allows users to join, leave, or rejoin a group intercom
conversation without pairing each headset. Up to 24 users
can all be connected in each private group.
Creating a Group Mesh
Creating a Group Mesh requires two or more Open
Mesh users.
B
A
D
C
Open Mesh
1. Enter into Mesh Grouping to create a Group Mesh.
C
YOU
and =M5s
HOLD
D
FRIEND
“Mesh Grouping”

QUICK START GUIDE
2. The headsets complete Mesh Grouping and
automatically switch from Open Mesh to Group Mesh.
“Group Mesh”
Open Mesh Group Mesh
BD
AC
Joining an Existing Group Mesh
One of the members in an Existing Group Mesh can
allow new members in Open Mesh to join the Existing
Group Mesh.
B
ACE
DF
New Members
Existing Group Mesh
and Current Members

QUICK START GUIDE
1. One of the current members and a new member
enter into Mesh Grouping to join the Existing Group
Mesh.
C
YOU
(NEW
MEMBER)
and =M5s
HOLD
E
CURRENT
MEMBER
IN GROUP
MESH
“Mesh Grouping”
2. The headsets complete Mesh Grouping. The new
members will hear a voice prompt as their headsets
automatically switch from Open Mesh to Group Mesh.
“Group Mesh”
EC
DF

QUICK START GUIDE
Reset Mesh
If a headset in an Open Mesh or Group Mesh resets the
Mesh, it will automatically return to Open Mesh (default:
channel 1).
=M8s
HOLD
Enable/Disable Mic (Default: Enable)
Users can enable/disable the microphone when
communicating in a Mesh Intercom.
Enable/Disable the Microphone
=M1s
HOLD

QUICK START GUIDE
Bluetooth Intercom
Up to three other people can be paired with the headset
for Bluetooth intercom conversations.
Note: Repeat the step above to pair with Intercom
Friends C & D.
Intercom Pairing
A
BCD
Pairing with Intercom B
A
and =5s
HOLD
B
“Intercom Pairing”
A
or =1x
TAP
B
=Flashing blue
LED confirms
intercoms are
paired.
LED
STATUS

QUICK START GUIDE
Two-Way Intercom
Last-Come, First-Served
AB
YOU Intercom
Friend 1
ACB
YOU Intercom
Friend 1
Intercom
Friend 2
ADCB
YOU Intercom
Friend 1
Intercom
Friend 2
Intercom
Friend 3
Start/End with
Intercom Friend 1
D
=1x
TAP
Start/End with
Intercom Friend 2
C
=2x
TAP
Start/End with
Intercom Friend 3
B
=3x
TAP