Sena SF1-01 User manual

User’s Guide
www.sena.com
Motorcycle Bluetooth®
Communication System
1.2 km
0.8 mile
1
1
2
51Audio
Multitasking
English
SF SERIES

SF Series
© 1998-2023 Sena Technologies, Inc. All rights reserved.
Sena Technologies, Inc reserves the right to make any changes and improvements to its product without providing prior notice.
Sena™ is a trademark of Sena Technologies, Inc. or its subsidiaries in the USA and other countries. SF1™, SF2™, SF4™, SFR™, SRL™, SRL2™,
SRL-EXT™, SRL-Mesh™, Momentum™, Momentum INC™, Momentum Lite™, Momentum Pro™, Momentum INC Pro™, Momentum EVO™,
Cavalry™, Latitude SR™, Latitude SX™, Latitude S1™, 30K™, 33i™, 50S™, 50R™, 50C™, 5S™, 5R™, 5R LITE™, 20S EVO™, 20S™, 10S™,
10C™, 10C PRO™, ProRide EVO™, 10C EVO™, 10U™, 10Upad™, 10R™, ACS10™, ACS-RAM™, C1™, C10™, CAST™, 3S™, 3S PLUS™,
SMH5™, SMH5-FM™, SMH5 MultiCom™, SMH10™, SMH10R™, SPH10™, SPH10H-FM™, Savage™, Prism Tube WiFi™, Prism™, Bluetooth
Audio Pack for GoPro®, IMPULSE™, FURY™, R1™, R1 EVO™, R1 EVO CS™, R2™, R2 EVO™, R2X™, M1™, M1 EVO™, RUMBA™, RC1™, RC3™,
RC4™, STRYKER™, Handlebar Remote™, Wristband Remote™, PowerPro Mount™, Powerbank™, FreeWire™, WiFi Docking Station™, WiFi Sync
Cable™, WiFi Adapter™, +mesh™, +Mesh Universal™, MeshPort Blue™, MeshPort Red™, MeshPort Black™, Econo™, OUTLANDER M™,
OUTRUSH™, OUTRUSH R™, OUTSTAR™, OUTSTAR S™, OUTFORCE™, OUTRIDE™, OUTRUSH M™, SPLASH™, EcoCom™, Parani A10™,
Parani A20™, Parani M10™, pi™, Snowtalk™, Snowtalk2™, SR10™, SR10i™, SM10™, SPIDER RT1™, SPIDER ST1™, X1™, X1 Pro™, X1S™,
EXPAND™, EXPAND BOOM™, EXPAND MESH™, Bluetooth Mic & Intercom™, Tufftalk™, Tufftalk Lite™, Tufftalk M™ are trademarks of Sena
Technologies, Inc. or its subsidiaries. These trademarks may not be used without the express permission of Sena.
GoPro® is a registered trademark of Woodman Labs of San Mateo, California. Sena Technologies, Inc. (“Sena”) is not afliated with Woodman
Labs. The Sena Bluetooth Pack for GoPro®is an after-market accessory specially designed and manufactured by Sena Technologies, Inc. for the
GoPro®Hero3 and Hero4 allowing for Bluetooth capabilities.
The Bluetooth®word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Sena is under license. iPhone, iPod
touch are registered trademarks of Apple Inc. Zumo™ is a trademark of Garmin Ltd. or its subsidiaries. TomTom™ is the trademark or registered
trademark owned by TomTom International B.V. Other trademarks and tradenames are those of their respective owners.

English
SF Series
CONTENTS
1 INTRODUCTION .......................................................................................................5
2 PACKAGE CONTENTS ............................................................................................6
3 INSTALLING THE SF SERIES ON YOUR HELMET ...............................................7
3.1 Installing the Main Unit............................................................................................................7
3.2 Installing the Speakers..........................................................................................................10
3.3 Installing the Microphones....................................................................................................10
4 GETTING STARTED.............................................................................................. 12
4.1 Button Operation...................................................................................................................12
4.2 Powering On and Off.............................................................................................................12
4.3 Charging................................................................................................................................12
4.4 Checking the Battery Level...................................................................................................13
4.5 Volume Adjustment ...............................................................................................................13
4.6 Muting the Microphone.........................................................................................................13
4.7 Sena Softwares .....................................................................................................................14
5 PAIRING THE SF SERIES WITH BLUETOOTH DEVICES.................................. 14
5.1 Phone Pairing ........................................................................................................................14
5.2 Second Mobile Phone Pairing - Second Mobile Phone, GPS, and SR10............................15
5.3 Advanced Selective Pairing - A2DP Stereo or Hands-free ..................................................16
5.4 Intercom Pairing ....................................................................................................................17
6 MOBILE PHONE, GPS, SR10 ............................................................................... 18
6.1 Mobile Phone Call Making and Answering...........................................................................18
6.2 Speed Dialing........................................................................................................................19
6.3 GPS Navigation.....................................................................................................................20
6.4 Sena SR10, Two-Way Radio Adapter ...................................................................................21
7 STEREO MUSIC .................................................................................................... 21
7.1 Bluetooth Stereo Music .........................................................................................................21
7.2 Music Sharing .......................................................................................................................22
8 INTERCOM............................................................................................................. 22
8.1 Two-way Intercom .................................................................................................................22
8.2 Three-way Intercom .............................................................................................................23
8.3 Four-way Intercom ................................................................................................................25
9 THREE-WAY CONFERENCE PHONE CALL
WITH INTERCOM PARTICIPANT ........................................................................ 26
10 GROUP INTERCOM ............................................................................................. 28
11 UNIVERSAL INTERCOM....................................................................................... 28
11.1 Universal Intercom Pairing....................................................................................................29
11.2 Two-way Universal Intercom .................................................................................................29
11.3 Three-way Universal Intercom .............................................................................................30
11.4 Four-way Universal Intercom ...............................................................................................31
12 FM RADIO ............................................................................................................. 33
12.1 FM Radio On and Off ............................................................................................................33
12.2 Preset Stations.......................................................................................................................33
12.3 Seek and Save ......................................................................................................................34
12.4 Scan and Save ......................................................................................................................34
12.5 Temporary Preset ..................................................................................................................35
12.6 Region Selection ...................................................................................................................35
13 FUNCTION PRIORITY........................................................................................... 35
14 HEADSET CONFIGURATION SETTINGS............................................................ 36
14.1 Mobile Phone Pairing ............................................................................................................37
14.2 Second Mobile Phone Pairing ..............................................................................................37
14.3 Phone Selective Pairing ........................................................................................................38
14.4 Media Selective Pairing ........................................................................................................38
14.5 GPS Pairing ...........................................................................................................................38
14.6 Delete All Bluetooth Pairing Information ...............................................................................38

SF Series
14.7 Remote Control Pairing .........................................................................................................39
14.8 Universal Intercom Pairing....................................................................................................39
14.9 Factory Reset ........................................................................................................................39
14.10 Exit Voice Conguration Menu ..........................................................................................39
15 SOFTWARE CONFIGURATION SETTINGS ........................................................ 40
15.1 Assigning Speed Dial ...........................................................................................................40
15.2 Headset Language ...............................................................................................................40
15.3 Setting Audio Source Priority (Default: Intercom).................................................................40
15.4 Enabling/Disabling Voice Activated Phone Answering (Default: Enable)............................41
15.5 Enabling/Disabling Voice Activated Intercom (Default: Disable).........................................41
15.6 Enabling/Disabling HD Voice (Default: Enable) ...................................................................41
15.7 Enabling/Disabling HD Intercom (Default: Enable)..............................................................42
15.8 Enabling/Disabling Voice Prompts (Default: Enable)...........................................................42
15.9 Enabling/Disabling RDS AF (Default: Disable) ....................................................................42
15.10 Enabling/Disabling FM Station Guide (Default: Enable) ..................................................42
15.11 Advanced Noise Control™ (Default: Always On) .............................................................42
15.12 Enabling/Disabling Audio Multitasking™ (Default: Disable) ............................................43
15.13 Background Volume (Default: Level 5) .............................................................................44
16 FIRMWARE UPGRADE......................................................................................... 44
17 TROUBLESHOOTING ........................................................................................... 45
17.1 Fault Reset.............................................................................................................................45
17.2 Factory Reset ........................................................................................................................45

SF Series
5
English
• Audio Multitasking™
• Built-in FM radio tuner with a station scan and save function**
• Music Sharing
• Advanced Noise Control™
• Microphone mute option
• Universal Intercom™
• Group Intercom™**
• HD quality crystal clear and natural sound
• Firmware upgradeable
• Water resistant
* In open terrain
** Only available in SF4
Key Specications:
• Bluetooth 5.1
• Supporting proles: Headset Prole, Hands-Free Prole (HFP),
Advanced Audio Distribution Prole (A2DP), and Audio Video
Remote Control Prole (AVRCP).
1 INTRODUCTION
Thank you for choosing the Sena SF Series, Bluetooth Stereo Headset
and Intercom. With the SF Series, you can call hands-free on your
Bluetooth mobile phone or listen to stereo music or voice instructions
of GPS navigations wirelessly.
• SF4 is a Multi-way intercom headset.
• SF1/SF2 is a Two-way intercom headset.
Please read this User’s Guide carefully before using the headset. Also
check www.sena.com for the latest version of the User’s Guide and
additional information related to Sena Bluetooth products.
The SF Series feature:
• Bluetooth 5.1
• SF4 Bluetooth intercom up to 1.2 kilometers (0.8 miles)*
• SF2 Bluetooth intercom up to 800 meters (880 yards)*
• SF1 Bluetooth intercom up to 100 meters (110 yards)*
• Up to four-way intercom
• Three-way conference phone call with intercom participant**
• Sena Motorcycles App for iPhone and Android phones

SF Series
6
2 PACKAGE CONTENTS
• Headset Main Unit
• Clamp Kit
• Glued Surface Mounting Adapter
Speaker
SF1
• Speakers
• Hook and Loop Fasteners for Speakers (2)
SF2, SF4
• Speakers
• HD Speakers
• Hook and Loop Fasteners for Speakers (2)

SF Series
7
English
Wired Boom Microphone
• Wired Boom Microphone
• Hook and Loop Fastener for Boom Microphone
• Microphone Sponges (2)
• Boom Microphone Holder
• Hook and Loop Fastener for Holder
Wired Microphone
• Wired Microphone
• Hook and Loop Fastener for Wired Microphone
Others
• USB Power & Data Cable (USB-C)
3 INSTALLING THE SF SERIES ON YOUR
HELMET
3.1 Installing the Main Unit
3.1.1 Installing the Clamp Kit to the Main Unit
1. Push and hold the clamp kit’s tab upwards. While pushing the tab,
insert the main unit into the clamp kit.
1
2

SF Series
8
2. Insert the back plate of the clamp kit between the internal padding
and external shell on the left side of the helmet.
3.1.2 Using the Glued Surface Mounting Adapter for the Main
Unit
If the clamp kit is not inserted into the helmet rmly, you can use the
glued surface mounting adapter.
1. Make sure that the main unit is separated from the clamp kit. If
not, push and hold the clamp kit’s tab upwards and remove the
main unit from the clamp kit.
1
2

SF Series
9
English
4. Push and hold the clamp kit’s tab upwards. While pushing up the
tab, insert the main unit into the clamp kit.
1
2
5. Clean the area on the left side of the helmet where you will attach
the glued surface mounting adapter with a moistened towel and
dry thoroughly.
2. While pushing the latch at the center of the clamp kit, push the
back plate of the clamp kit outwards to remove it.
1
2
3. Align the glued surface mounting adapter and the back of the
clamp kit and slide the adapter into the clamp kit until you hear a
click. Make sure that the glued surface mounting adapter ts the
back of the clamp kit’s grooves.

SF Series
10
6. Peel off the glued cover and attach the main unit on the left side
of your helmet.
3.2 Installing the Speakers
1. Peel off each cover of the hook and loop fasteners for the speakers
to expose the adhesive surface.
2. Attach the fasteners to the ear pockets inside the helmet, and
then attach the speakers to the fasteners.
12
3. Connect the speaker cable to the speaker connector.
3.3 Installing the Microphones
3.3.1 Using the Wired Boom Microphone
1. Peel off the cover of the hook and loop fastener for the wired
boom microphone to expose the adhesive tape.
2. Attach the hook and loop fastener on the inside surface of the
left external shell, and then attach the wired boom microphone’s
mounting plate to the hook and loop fastener.
1
2

SF Series
11
English
3. Align the arrows on the main unit and microphone cables and
insert the microphone cable into the microphone connector.
3.3.2 Using the Wired Microphone
1. Peel off the cover of the hook and loop fastener for the wired
microphone to expose the adhesive tape. Then, attach the hook
and loop fastener on the inside of the helmet’s chin guard.
2. Attach the wired microphone to the hook and loop fastener for the
wired microphone.
3. Align the arrows on the main unit and microphone cables and
insert the microphone cable into the microphone connector.

SF Series
12
4 GETTING STARTED
4.1 Button Operation
(+) Button
• Increase volume
• Track forward
• Scan FM radio station
• Speed dial
Center Button
• Answer and end a mobile phone call
• Reject an incoming mobile phone call
• Start and end intercom conversation
• Play and pause Bluetooth stereo device
• Enter into intercom pairing mode
• Enter into voice configuration setting
(-) Button
• Decrease volume
• Track back
• Turn on/off FM tuner
4.2 Powering On and Off
To power on the headset, press the Center Button and the (+) Button
at the same time for 1 second while hearing ascending beeps and a
voice prompt, “Hello.” To power off the headset, tap the Center Button
and the (+) Button at the same time while hearing descending beeps
and a voice prompt, “Goodbye.”
4.3 Charging
You can charge the headset by connecting the USB Power & Data
Cable (USB-C).
The headset will be fully charged in about 1.5 hours. (The charging
time may vary depending on the charging method.)
• Any 3rd party USB charger can be used with Sena products if the
charger is approved by either the FCC, CE, IC, or other locally
approved agencies.
• Use of a non-approved charger may cause re, explosion, leakage,
and other hazards which may also reduce the life time or performance
of the battery.
• The headset is compatible with 5 V input USB-charged devices only.
or
AC Adapter

SF Series
13
English
4.4 Checking the Battery Level
4.4.1 LED Indicator
When the headset is powering on, the red LED ashes rapidly
indicating the battery level.
4 ashes = High, 70 ~ 100%
3 ashes = Medium, 30 ~ 70%
2 ashes = Low, 0 ~ 30%
4.4.2 Voice Prompt Indicator
When you power on the headset, keep pressing the Center Button and
the (+) Button simultaneously for about 5 seconds. Then you will hear
a voice prompt indicating the battery level. However, if you release the
buttons as soon as the headset turns on, you will not hear a voice
prompt for the battery level indication.
4.5 Volume Adjustment
You can easily adjust the volume by tapping the (+) Button or the (-)
Button. The volume is set and maintained independently at different
levels for each audio source even when you reboot the headset. For
example, once you set the volume for mobile phone hands-free, it will
not change even if you adjust the volume for your Bluetooth MP3
music. However, if you adjust the volume during stand-by mode, it will
affect volume levels of every audio source.
4.6 Muting the Microphone
To mute or unmute the microphone, press and hold the Center Button
and the (-) Button for 1 second. When the microphone is muted, you
will hear descending beeps every 10 seconds. When you unmute the
microphone, you will hear ascending beeps and the microphone will
be active.

SF Series
14
4.7 Sena Softwares
4.7.1 Sena Device Manager
The Sena Device Manager allows you to upgrade the rmware and
congure the device settings directly from your PC. Using this
software, you can assign speed dial presets, FM radio frequency
presets and more. It is available for both Windows and Mac. For more
information on downloading the Device Manager, please visit
www.sena.com.
4.7.2 Sena Motorcycles App
By simply pairing your phone with your headset, you can use the Sena
Motorcycles App for quicker and easier set up and management.
• Download
– Android: Google Play Store > Sena Motorcycles
– iOS: App Store > Sena Motorcycles
NOTICE
• This User Guide (Version 3.0.0 or higher) explains how to operate the
SF Series (SF1/SF2/SF4) with rmware version 3.0 or higher.
• For operating the SF Series (SF1/SF2/SF4) with a rmware version
lower than 3.0, refer to the SF Series (SF1/SF2/SF4) User Guide that is
available when you connect the SF Series (SF1/SF2/SF4) to the
Motorcycles App.
5 PAIRING THE SF SERIES WITH
BLUETOOTH DEVICES
Before using the SF Series Bluetooth headset with any other Bluetooth
devices for the rst time, you will need to pair them together. You can
pair the SF Series with Bluetooth mobile phones, Bluetooth stereo
devices such as MP3 players, or motorcycle specic Bluetooth GPS
navigation, and with other Sena Bluetooth headsets. The pairing
operation is required only once for each Bluetooth device. The headset
remains paired with the devices and automatically reconnects to them
when they are within range.
5.1 Phone Pairing
There are three ways to pair the phone.
5.1.1 Initially Pairing the Headset
The headset will automatically enter the phone pairing mode when you
initially turn on the headset or in the following situation:
• Rebooting after executing Factory Reset; or
• Rebooting after executing Delete All Pairings.

SF Series
15
English
1. Press and hold the Center Button and the (+) Button for 1 second
until you hear a voice prompt, “Phone pairing.”
2. Search for Bluetooth devices on your smartphone. Select the
Sena SF Series in the list of devices detected on your phone.
3. Enter 0000 for the PIN. Some mobile phones may not ask for the
PIN.
Note:
• The phone pairing mode lasts for 3 minutes.
• To cancel phone pairing, tap the Center Button.
5.1.2 Pairing When the Headset is Turned Off
1. While the headset is off, press and hold the Center Button and the
(+) Button until you hear a voice prompt, “Phone pairing.”
2. Search for Bluetooth devices on your smartphone. Select the
Sena SF Series in the list of devices detected on your phone.
3. Enter 0000 for the PIN. Some mobile phones may not ask for the
PIN.
5.1.3 Pairing When the Headset is Turned On
1. While the headset is on, press and hold the Center Button for
10 seconds until you hear a voice prompt, “Conguration menu.”
2. By tapping the (+) Button, you will hear a voice prompt, “Phone
pairing.”
3. Search for Bluetooth devices on your smartphone. Select the
Sena SF Series in the list of devices detected on your phone.
4. Enter 0000 for the PIN. Some mobile phones may not ask for the
PIN.
5.2 Second Mobile Phone Pairing - Second Mobile
Phone, GPS, and SR10
Typical Bluetooth headsets can connect with only one Bluetooth
device, but a second mobile phone pairing allows the headset to
connect with another Bluetooth device such as a second mobile
phone, an MP3 Player, or the Sena SR10, the Bluetooth adapter.
1. To enter the voice conguration menu, press and hold the
Center Button for 10 seconds until you hear a voice prompt,
“Conguration menu.”
2. Tap the (+) Button until you hear a voice prompt, “Second mobile
phone pairing.”

SF Series
16
3. Search for Bluetooth devices on your mobile phone. Select the
Sena SF Series in the list of the devices detected on the mobile
phone.
4. Enter 0000 for the PIN. Some mobile phones may not ask for the
PIN.
5.3 Advanced Selective Pairing - A2DP Stereo or
Hands-free
When you are using a smartphone, sometimes you may need to
selectively use the SF Series for A2DP stereo music only or for mobile
phone hands-free only. These instructions are for advanced users who
want to pair the SF Series to their smartphones with only one selective
prole: A2DP for stereo music of HFP for phone calls.
If you have previously paired a mobile phone to the SF Series, you
must clear the previous pairing list on both devices: the mobile phone
and the SF Series. To clear the pairing list on the SF Series, please do
a factory reset or following the pairing list clearing procedure
described in
section 14.9, “Factory Reset” or 14.6, “Delete All
Bluetooth Pairing Information.” To clear the pairing list on the mobile
phone, please refer to the mobile phone manual . For most smartphones,
delete the Sena SF Series from the list of Bluetooth devices in the
settings menu.
5.3.1 A2DP Stereo Music Only
1. To enter the voice conguration menu, press and hold the
Center Button for 10 seconds until you hear a voice prompt,
“Conguration menu.”
2. Tap the (+) Button until you hear a voice prompt, “Media selective
pairing.”
3. Search for Bluetooth devices on your smartphone. Select the
Sena SF Series in the list of devices detected on your phone.
4. Enter 0000 for the PIN. Some mobile phones may not ask for the
PIN.
5.3.2 HFP for Phone Call Only
1. To enter the voice conguration menu, press and hold the
Center Button for 10 seconds until you hear a voice prompt,
“Conguration menu.”
2. Tap the (+) Button until you hear a voice prompt, “Phone selective
pairing.”
3. Search for Bluetooth devices on your smartphone. Select the
Sena SF Series in the list of devices detected on your phone.
4. Enter 0000 for the PIN. Some mobile phones may not ask for the
PIN.

SF Series
17
English
5.4 Intercom Pairing
Up to three other people can be paired with the headset for Bluetooth
intercom conversations.
A
B
C
D
Pairing A & B
5.4.1 Using the Smart Intercom Pairing (SIP)
SIP allows you to quickly pair with your friends for intercom
communication by scanning the QR code on the Sena Motorcycles
App without remembering the button operation.
1. Pair the mobile phone with the headset.
2. Open the Sena Motorcycles App and tap (Smart Intercom
Pairing Menu).
3. Scan the QR code displayed on your friend (B)’s mobile phone.
• Your friend (B) can display the QR code on the mobile phone by
tapping > QR code ( ) on the Sena Motorcycles App.
4. Tap Save and check that your friend (B) is paired with you (A)
correctly.
5. Tap Scan ( ) and repeat steps 3-4 to pair with Intercom Friends
(C) and (D).
Note:
The Smart Intercom Pairing (SIP) is not compatible with Sena products
that use Bluetooth 3.0 or below.

SF Series
18
5.4.2 Using the Button
1. Turn on the two headsets (A and B) that you would like to pair with
each other.
2. Press and hold the Center Button for 5 seconds, then you will hear
a mid-toned single beep and a voice prompt, “Intercom pairing.”
3. Simply tap the Center Button of any one of the two headsets
A or B and wait until the intercom connection is automatically
established. The two headsets A and B are paired with each other
for intercom conversation. If the pairing process is not completed
within one minute, the headset will return to stand-by mode.
6 MOBILE PHONE, GPS, SR10
6.1 Mobile Phone Call Making and Answering
1. When you have an incoming call, tap the Center Button to answer
the call.
2. You can also answer the incoming call by loudly speaking any
word of your choice if
Voice Activated Phone Answering (VOX
Phone) is enabled, unless you are connected to intercom.
3. To end a call, press the Center Button for 2 seconds until you
hear a mid-tone single beep, or wait for the called person to end
the call.
4. To reject a call, press the Center Button for 2 seconds until you
hear a beep while the phone is ringing.
5. There are several ways to make a phone call:
– Enter numbers on your mobile phone’s keypad and make a call.
Then the call is automatically transferred to the headset.
– In stand-by mode, press the Center Button for 3 seconds, to
activate the voice dialing of your mobile phone. For this, the
voice dialing function must be available on the mobile phone.
Refer to your mobile phone manual for further instruction.

SF Series
19
English
Note:
1. If you have two phones connected to your headset and you have an
incoming call from the second phone during the call of the first phone,
then you may still receive the call from the second phone. In this case,
the call from the first phone is on waiting mode. If you end a call, then it
will automatically guide you to the first phone call.
2. If you have a mobile phone and a GPS connected to your headset, you
may not be able to listen to the GPS voice instruction during the phone
call.
6.2 Speed Dialing
You can quickly make a phone call by using the voice speed dial
menu.
1. To enter into the voice speed dial menu, press and hold the (+)
Button for 3 seconds and you will hear a mid-toned single beep
and a voice prompt saying “Speed dial.”
2. Tap the (+) Button or the (-) Button to navigate between the
menus. You will hear voice prompts for each menu item.
3. Tap the Center Button to select a voice menu among the followings:
(1) Last number redial (4) Speed dial 3
(2) Speed dial 1 (5) Cancel
(3) Speed dial 2

SF Series
20
4. After selecting the last number redial menu, you will hear a voice
prompt, “Last number redial.” Then, to redial the last phone call
number, tap the Center Button.
5. To call one of the speed dials, tap the (+) Button or the (-) Button
to navigate between the menus until you hear a voice prompt
saying “Speed dial (#).” Then, tap the Center Button.
6. If you want to exit the speed dial immediately, tap the (+) Button
or the (-) Button until you hear a voice prompt saying “Cancel”,
and tap the Center Button. If you do not press any button within
15 seconds, the SF Series will exit the voice speed dial menu and
go back to stand-by mode.
Note:
1. Make sure that you connect the mobile phone and the headset to use the
speed dial function.
2. You need to assign speed dial numbers before using the speed dial
(please refer to section 15.1, “Assigning Speed Dial”).
6.3 GPS Navigation
6.3.1 GPS Pairing
1. Turn on the headset and press the Center Button for 10 seconds
until you hear high-toned double beeps. You will also hear a voice
prompt saying “Conguration menu.”
2. Triple tap the (+) Button and you will hear a voice prompt saying
“GPS pairing.”
3. Search for Bluetooth devices on the GPS navigation screen. Select
the Sena SF Series in the list of the devices detected on the GPS.
4. Enter 0000 for the PIN.
5. The GPS conrms that pairing has completed and the SF Series
are ready to use. You will hear a voice prompt saying “Your
headset is paired.”
6. If the pairing process is not completed within three minutes, the
SF Series will return to stand-by mode.
Note:
When Audio Multitasking is enabled, if you pair your GPS device via GPS
Pairing, its instructions will not interrupt your intercom conversations, but
will overlay with them.