Sena RUMBA User manual

QUICK START GUIDE
ENGLISH
BLUETOOTH®MULTI-SPORT HELMET

Rumba is a comfortable and protective Multi-Sport
helmet for bicycling, skateboarding and roller skating.
The Rumba with built-in Bluetooth®capabilities allows
you to hear GPS navigation, take phone calls and listen
to your favorite tunes. You can use the Bluetooth®
Intercom to communicate with other Rumba users.
Bluetooth®4.1
Two-Way Intercom
Intercom up to 400 m (0.2 mi)*
Advanced Noise Control™
* in open terrain
RIDE CONNECTED

GETTING STARTED
SENA Technologies, Inc.
Customer Support: sena.com
1. This product comes with a Quick Start Guide, which
is a basic version of the User’s Guide. A FULL
VERSION OF THE USER’S GUIDE CAN BE
DOWNLOADED AT SENA.COM.
2. Update this product for free with the latest firmware
to fully enjoy the new advanced features built into this
product. Visit sena.com to see how to update your
product.
3. Users can follow Sena on Facebook, YouTube,
Twitter and Instagram to receive the most up to
date information on products, helpful tips and all
other announcements regarding Sena products.
GETTING STARTED

GETTING STARTED
How to Use This Guide
The legend and callouts are here to help you read the illustrations.
New technology can be confusing, but we’ve created a simple way to
perform actions using illustrations.
=1s
HOLD
Function = Button(s) to Tap or Hold
Icon Legend
1x
TAP Tap button the specified
number of times 10s
HOLD Press and Hold button for the
specified amount of time
“Hello” Audible prompt
Buttons
(+) Button
(–) Button

QUICK START GUIDE
Product Details
QUICK START GUIDE
Ventilations
Speakers
Microphone
Bluetooth System Button
(+) Button
(-) Button
(-) Button
DC Power Charging &
Firmware Upgrade Port
Charging LED

QUICK START GUIDE
How to Fit the Helmet
For proper use, the helmet must sit level on the head
and low on the forehead. The helmet uses a simple,
quick-release buckle system that, once adjusted, can
be buckled and unbuckled without changing the
tightness. For proper use, the straps must be tight and
evenly tensioned.
To properly wear your helmet:
1. Position the helmet on your head with the front
covering your forehead. If the helmet is tipped back
too far and is not covering your forehead then the
helmet is not in the proper position.
2. Position the strap adjuster centered, just below
your ears.

QUICK START GUIDE
WARNING: Always wear the helmet in the proper position on
your head with the front of the helmet covering your forehead for
maximum protection. Never wear the helmet tipped back as the
helmet will be in the improper position causing your forehead to
be exposed. All fitment adjustments need to be made with the
helmet in the proper position.
3. Position the helmet halfway down on your forehead
with the buckle under your chin and back against
your throat. The straps should fit comfortably
around both of your ears.
4. After removing the chinstrap pad, adjust the
chinstrap tension at the buckle so the chinstrap is
tight and comfortable by pulling the chinstrap end
through the buckle to either tighten or loosen as
needed.
O-ring
Strap Adjuster
Buckle
Chinstrap Pad
Chinstrap

QUICK START GUIDE
5. Secure the excess strap with the “O-Ring” and then
attach the “Chinstrap Pad”.
Note: Check the chinstrap’s position and tension regularly to
ensure proper fit.
6. Turn the retention system knob clockwise to tighten
or counterclockwise to loosen.
Retention System Knob
R
O
T
A
T
E
T
O
S
I
Z
E
WARNING: For maximum protection, this helmet must be fitted
and attached properly to the wearer’s head in accordance with the
following instructions. If after adjustment the helmet does not fit
properly, do not use the helmet. Return it to the retailer or Sena.

QUICK START GUIDE
Sena Utility App
By simply pairing your phone with your Bluetooth system, you can
use the Sena Utility App for quicker, easier setup and management.
• App Features
- Music, Device settings, Quick Start Guide, and User’s Guide.
• Download
- Android: Google Play Store > Sena Utility
- iOS: App Store > Sena Utility
Sena Device Manager
The Sena Device Manager allows you to upgrade firmware and
configure settings directly from your PC. Download the Sena Device
Manager from sena.com.

QUICK START GUIDE
Basic Operations
Power On
=1s
HOLD
Volume Up
=1x
TAP
Power Off
=1x
TAP
Volume Down
=1x
TAP
Checking the Battery Level
Instruction is for when powering the Bluetooth system on.
Audible Method
=1s
HOLD
“Battery level is
high/medium/low”

QUICK START GUIDE
Phone Pairing
There are three ways to pair the phone.
Initially Pairing the Bluetooth system
The Bluetooth system will automatically enter the phone pairing mode
when you initially turn on the Bluetooth system or in the following
situation:
• Rebooting after executing Factory Reset; or
• Rebooting after executing Delete All Pairings.
=1s
HOLD
“Phone Pairing”
With your mobile phone in
Bluetooth-pairing mode,
select Sena Rumba in the
list of devices detected.
The Bluetooth system completes the
pairing process.
“Your headset is paired”
=
PIN
NUMBER
Note:
• The phone pairing mode lasts for 3 minutes.
• To cancel pairing, tap the (+) Button or (-) Button.

QUICK START GUIDE
Pairing When the Bluetooth system is Turned Off
While the Bluetooth system is off, press and hold the (+) Button and
(-) Button for 5 seconds.
=5s
HOLD
“Phone Pairing”
With your mobile phone in Bluetooth-pairing mode, select Sena Rumba in
the list of devices detected.
=
PIN
NUMBER
The Bluetooth system completes the pairing process.
“Your headset is paired”

QUICK START GUIDE
Pairing When the Bluetooth system is Turned On
While the Bluetooth system is on, press and hold the (+) Button for
5 seconds.
=5s
HOLD
“Phone Pairing”
With your mobile phone in Bluetooth-pairing mode, select Sena Rumba in
the list of devices detected.
=
PIN
NUMBER
The Bluetooth system completes the pairing process.
“Your headset is paired”

QUICK START GUIDE
Mobile Phone
Answer a Call
=1x
TAP
Reject a call
=2s
HOLD
Make a Call with the
Voice Dialer
=3s
HOLD
End a Call
=2s
HOLD
Redial Last Number
=3s
HOLD
Music Controls
Play/Pause
=1s
HOLD
Next Track
=2s
HOLD
Previous Track
=2s
HOLD

QUICK START GUIDE
Bluetooth Intercom
The Bluetooth system can be paired with another Bluetooth system
for Bluetooth intercom conversation.
Intercom Pairing
INTERCOM
FRIEND
YOU
A
B
Pairing with Intercom B
A A
and =5s
HOLD
or =1x
TAP
B B
“Intercom Pairing”
Start/End Conversation with Intercom Friend
B
=1s
HOLD

QUICK START GUIDE
Configuration Menu
Access the Configuration Menu
=10s
HOLD
Execute Menu Options
=1x
TAP
Navigate Between
Menu Options
=1x
TAP
Troubleshooting
Factory Reset
=10s
HOLD
=5x
TAP
=1x
TAP
Fault Reset
=
Note: Fault Reset will not
restore the Bluetooth system
to the factory default settings.

QUICK REFERENCE
QUICK REFERENCE
TYPE OPERATION BUTTON COMMANDS
Basic
Operations
Power on 1s
HOLD
Power off 1x
TAP
Volume up/down or 1x
TAP
Mobile
Phone
Answer a call 1x
TAP
End a call 2s
HOLD
Reject a call 2s
HOLD
Voice dial 3s
HOLD

QUICK REFERENCE
TYPE OPERATION BUTTON COMMANDS
Music
Play/Pause music 1s
HOLD
Next track 2s
HOLD
Previous track 2s
HOLD
Intercom
Intercom pairing
5s
HOLD
1x
TAP
Start/End intercom 1s
HOLD
1.0.0_EN_October2020