Sena 10C Operating and maintenance instructions

PREPARATION
Knowing the Headset Layout
Antenna
Camera Button
Lens Jog Dial
Status LED
Micro HDMI
Cable Port
MicroSD
Card Slot
Charging LED
Speaker and
Microphone Port
DC Power Charging &
Firmware Upgrade Port
Phone Button
BASIC OPERATION
Operating the Buttons
5
Tap the
button
Double tap the
button
Press and hold
the button for
5 seconds
Press the two
buttons at the
same time
Rotate the
Jog Dial
1
ON You will hear
ascending beeps.
“Hello”
OFF You will hear
descending beeps.
“Good bye”
Simultaneously press and hold the Jog Dial and the Phone Button
Adjusting the Volume
You will hear a beep when the volume
reaches the maximum or minimum
level.
PAIRING
Pairing with Mobile Devices - Phone, Music
Blinking
You will hear multiple beeps.
“Phone pairing”
Bluetooth
Bluetooth
Sena10C
“Your headset is paired”
Checking the Battery Level
Blinking
70~100%
Blinking
30~70%
Blinking
0~30%
Turn on the headset and check the battery level via the Status
LED.
3
“High” 70~100%
“Medium” 30~70%
“Low” 0~30%
Or, press and hold the Jog Dial and the Phone Button for 3 more
seconds when the headset turns on. You will hear a triple beep
and a voice prompt.
Charging the Battery
Charging
Fully charged
AC adapter
or
Using Phone Features
After Pairing…
Answering Calls
Ending Calls
Rejecting Calls
Transferring Calls
between a mobile phone and the
headset
or
or
or
“Hello”
until you hear a beep
until you hear
a beep
until you hear
a beep
Installing the Headset
1
3
2
1
2
12
1
2
12
Clamp Unit
Speaker
Microphone
Headset
You will hear a beep.
“Speed dial”
Making Calls
Using the Phone Keypad Using the Voice Dialer
Using the Speed Dial
Voice Menu
• Last number redial
• Speed dial 1
• Speed dial 2
• Speed dial 3
• Cancel
Listening to Music
1
After Pairing…
Playing or Pausing Music Tracking Forward or Backward
until you hear
a double beep
Rotate While
Pressing
Österreich:
Tel.: [phone]
Fax: [phone]
Deutschland:
Tel.:0761 / 59 21 00
Fax: 0761 / 58 52 28
Schweiz:
Tel.:061 / 27 311 - 31
Fax: 061 / 27 311- 39
HANTZ + PARTNER
The Upgrade Company! www.hantz.com
www.senaheadsets.de

Quick Start Guide
Motorcycle Bluetooth® Camera &
Communication System
INTERCOM
Pairing with Other Headsets
Headset A Headset B
“Intercom pairing”
Follow the steps above to pair with two or more headsets.
Using the Intercom
After Pairing…
1
2
3
You can start a two-way intercom
conversation with each headset.
CAMERA
ON OFF
Recording Videos
1
ON “Recording”
OFF “Recording stopped”
Taking Photos
You will hear a shutter sound.
Tagging Videos
To EnterVideo Tagging Mode To Start VideoTagging To ExitVideo Tagging Mode
13 3
“Video tagging ready” “Video tagging” “
“Taggingcomplete”
RADIO
2You will hear a double beep sound.
“FM on” or
Seeking Stations
Rotate While Pressing
Saving or Deleting Stations
To Save To Delete
2
“Preset (#)” “(#)” “Save preset
(#)”
“Delete preset
(#)”
Listening to Preset
Stations
SETTING
Method1) Using the headset
Headset Settings Camera Settings
8
“Camera setup”
Method2) Using the Sena Device Manager
Connect the headset to your computer via a USB cable. Launch the Sena
Device Manager and click DEVICE SETTING
settings.
For details about downloading the Sena Device Manager, refer tothe
Method3) Using the Sena Smartphone App
1. On your smartphone, download the Sena Smartphone App for Android
or iPhone from Google Play or App Store.
Refer to www.senaheadsets.de/download for more details.
2. Pair your smartphone with the headset.
3. Run the Sena Smartphone App. Swipe the screen to the right and tap
Setting
15.May
You can view other Sena products at the Sena website:
www.senaheadsets.de
TROUBLESHOOTING
Factory Reset
If you want to restore the 10C to factory default settings, press and hold
the Phone Button for 12 seconds. Tap the Jog Dial. The headset
Fault Reset
If the 10C is not working properly for any
reason, push the pin-hole reset button
located on the back of the headset.
Sena
www.senaheadsets.de
www.facebook.de/BikerHeadset
E-mail: [e-mail]
Österreich:
Tel.: [phone]
Fax: [phone]
Deutschland:
Tel.:0761 / 59 21 00
Fax: 0761 / 58 52 28
Schweiz:
Tel.:061 / 27 311 - 31
Fax: 061 / 27 311- 39
HANTZ + PARTNER
The Upgrade Company! www.hantz.com
www.senaheadsets.de
HANTZ + PARTNER
www.senaheadsets.de