Sencor SRD 6600 DAB+ User manual

PORTABLE DAB RADIO
SENCOR SRD 6600 DAB+
USER’S MANUAL
EN
SRD 6600 DAB 12j.indb 1 09.09.2016 14:17:37

SRD 6600 DAB 12j.indb 2 09.09.2016 14:17:37

EN 1
EN
Revision 09/2016Copyright © 2016, Fast ČR, a. s.
Safety information
1. Safety information
IMPORTANT SAFETY INSTRUCTIONS
The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
WARNING:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER
(OR BACK). NO USER SERVICEABLE PARTS INSIDE, REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
1. READ INSTRUCTIONS – All the safety and operating instructions should be read
before the product is operated.
2. RETAIN INSTRUCTIONS – The safety and operating instructions should be
retained for future reference.
3. HEED WARNINGS – All warnings on the product and in the operating instructions
should be adhered to.
4. FOLLOW INSTRUCTIONS – All operating and use instructions should be followed.
5. WATER AND MOISTURE – Do not use this product near water – for example, near
abath tub, wash bowl, kitchen sink, or laundry tub; in awet basement; or near
aswimming pool; and the like. This appliance shall not be exposed to dripping or
splashing water and no object filled with liquids such as vases shall be placed on
the apparatus.
6. CLEANING – Unplug this product from the wall outlet before cleaning. Do not use
liquid cleaners or aerosol cleaners. Use adamp cloth for cleaning.
7. VENTILATION – Slots and openings in the cabinet are provided for ventilation and
to ensure reliable operation of the product and to protect it from overheating, and
these openings must not be blocked or covered. The openings should never be
blocked by placing the product on abed, sofa, rug or other similar surface. This
product should not be placed in abuilt-in installation, such as abookcase or rack,
unless proper ventilation is provided or the manufacturer*instructions have been
adhered to.
8. ACCESSORIES – Only use attachments/accessories specified by manufacturer.
9. POWER SOURCES – This product should be operated from the type of power
source indicated on the marking label. If you are not sure of the type of power
supply to your home, consult your product dealer or local power company. For
products intended to operate from built-in battery power, please refer to the
operating instructions.
SRD 6600 DAB 12j.indb 1 09.09.2016 14:17:37

2 EN
EN
Revision 09/2016Copyright © 2016, Fast ČR, a. s.
Safety information
10. NON-USE PERIODS – The power cord of the product should be unplugged from
the outlet and slide the power switch to OFF position when left unused for long
periods of time.
11. OBJECT AND LIQUID ENTRY – Never push objects of any kind into this product
through openings as they may touch dangerous voltage points or short-out parts
that could result in afire or electric shock. Never spill liquid of any kind on the
product.
12. HEAT – The product should be situated away from heat sources such as radiators,
heat registers, stoves or other products (including amplifiers) that produce heat.
13. Protect the power cord from being walked on or pinched, particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
14. SERVICING – Do not attempt to service this product yourself as opening or
removing covers may expose you to dangerous voltage or other hazards. Refer all
servicing to qualified service personnel.
15. Apparatus shall not be exposed to dripping or splashing.
16. Where the plug of the Direct plug-in adaptor is used as disconnect device, the
disconnect device shall remain readily operable.
17. WARNING: Do not open. No user replaceable parts inside, refer servicing to
qualified technician.
18. WARNING: Never lubricate any part of this unit.
19. WARNING: Place this unit on aflat, hard and stable surface.
20. WARNING: Never place this unit on other electrical equipment.
21. WARNING: Keep this unit away from direct sunlight, naked flames or heat.
SRD 6600 DAB 12j.indb 2 09.09.2016 14:17:37

EN 3
EN
Revision 09/2016Copyright © 2016, Fast ČR, a. s.
Controls & Connections
2. Controls & Connections
1. TUNE + /- button
2. MENU button
3. ST.MO/ SELECT button
4. STANDBY button
5. LCD Display
6. FUNCTION button
7. PRESET button
8. INFO button
9. SCAN button
10. SLEEP button
11. VOLUME knob
12. HANDLE
13. DC input socket
14. Power ON/OFF switch
15. AUX in jack
SRD 6600 DAB 12j.indb 3 09.09.2016 14:17:38

4 EN
EN
Revision 09/2016Copyright © 2016, Fast ČR, a. s.
Getting Started
3. Getting Started
3.1. DAB/FM antenna
Before using your radio for DAB or FM reception, full extend the telescopic antenna
which located at the back of unit.
You may need to adjust the position of the telescopic antenna for maxing signal
strength.
For the first time to start to use this radio, the unit will perform DAB full scanning.
3.2. Connect Power
You can use this radio player on AC power or built-in type battery power.
Battery Life (Approx. hours) 4-5 hours depends on volume level.
Caution:
Risk of product damage! Make sure that the power supply voltage corresponds to the
voltage printed on the back or the underside of the product.
• Risk of electric shock! When you unplug the AC adapter, always pull the plug from
the socket. Never pull the cord.
• Use only the AC adaptor specified by the manufacturer or sold with this unit.
3.3. Setting the clock
The clock on your radio is automatically set when first used from the time signal
broadcast with DAB radio stations.
If aDAB station is not available, the clock may be set manually via the MENU system.
(Please refer to CLOCK SET page).
• Clock display will keep running if connected to AC power.
• In order to save battery life, there were no Clock displayed during Standby mode if
operated with DC battery.
3.4. Backlight
Adjust backlight only operate in AC power.
During Standby mode, press and hold MENU button in 3 secs then press TUNE +/- to
adjust the backlight level (Min. 0-10 Max.).
3.5. Power control
3.5.1. Using AC power
Connect the power adaptor to the DC 5V socket on the unit.
• Slide the power switch to “ON” position then press the STANDBY button in 2 secs.
• The display will light up and the unit will switch on.
SRD 6600 DAB 12j.indb 4 09.09.2016 14:17:38

EN 5
EN
Revision 09/2016Copyright © 2016, Fast ČR, a. s.
Getting Started
To turn the unit in STANDBY mode:
• Press the STANDBY button. The clock will continue to run whilst mains power is
connected.
3.5.2. Using battery power
Charging the battery
• Slide the power switch to “OFF” position.
• Connect the power adaptor to the DC 5V socket on the unit, than the wall power
socket.
• Slide the power switch to “ON” position
• Display will light up and battery charging indicator show on display.
• Slide the power switch to “ON” position then press the STANDBY button.
• The display will light and the unit will switch on.
To turn the unit in STANDBY mode:
• Press the STANDBY button and the display will be switch off completely.
Note:
The clock will not continue to run when using DC power.
Battery power indication will be appear on LCD display.
ENERGY SAVING/ ERP2 REGULATION
This device is equipped with an AUTOMATIC SWITCH OFF / STANDBY
SYSTEM for energy-saving requirements. This is regulated by an
EU-standard and is NOT AMALFUNCTION.
3.6. Adjust the volume
To adjust the volume from the front panel controls:
Turn the VOLUME knob to increase or decrease the volume level.
3. 7. Clock setup
SET TIME/DATE: This main option enables the clock to be set manually if these is no
available DAB transmission.
To set the time and data manually:
1. In DAB or FM mode, press MENU button to access DAB / FM MENU.
Battery level
indicator
SRD 6600 DAB 12j.indb 5 09.09.2016 14:17:38

6 EN
EN
Revision 09/2016Copyright © 2016, Fast ČR, a. s.
Getting Started
2. Press TUNE +/- to scroll the menu options.
3. To select an option, press SELECT [Main menu] button -> SYSTEM [Clock Setup]
4. Set the Clock setup to Manual (Defaulted at Radio).
5. To select an option, press SELECT button.
6. Repeat steps 2-5 if any sub-option is available under an option.
3.8. Listen to DAB radio
1. Press FUNCTION button repeatedly to select DAB radio.
[Tuning...] is displayed.
2. Press SCAN button to start full scan.
The unit stores all the DAB radio stations automatically and then broadcasts the
first available station.
3. The station list is memorized in the unit. Next time when you turn on the unit, the
station scan does not take place.
4. If no DAB station is found, [Not available] appears on display.
To tune to astation from the available station list:
– In DAB mode, press TUNE+/- to navigate through the available DAB stations.
3.8.1. Store DAB radio stations automatically
Note:
New stations and services will be added in the DAB broadcast. To make new DAB
stations and services available, preform full scan regularly.
– In DAB mode, press SCAN button, the unit scans all the available DAB radio
stations and stored.
3.8.2. Select apreset DAB radio station
– In DAB mode, to select any preset number; press PRESET.
– Press TUNE +/- repeatedly then press SELECT to select the preset station.
3.8.3. Store DAB radio stations manually
Note:
You can store amaximum of 10 preset DAB radio stations.
1. Tune to aDAB radio station.
2. Press and hold PRESET button in 3 secs, then press
TUNE +/- to select apreset number. Display show P1
and briefly.
3. Press SELECT to confirm.
4. Repeat steps 1-3 to store other DAB stations.
SRD 6600 DAB 12j.indb 6 09.09.2016 14:17:38

EN 7
EN
Revision 09/2016Copyright © 2016, Fast ČR, a. s.
Getting Started
3.8.4. Show DAB information
During DAB radio broadcast, press INFO button repeatedly to scroll through the
following information (if available):
• Station name
• Channel and frequency
• Audio bit rate
• Signal strength
• Time/ Date
• Dynamic label segment (DLS)
• Program type (Prg Type)
3.8.5. Use DAB menu
1. In DAB mode, press MENU button to access the DAB menu.
2. Press TUNE +/- to scroll through the menu options:
– [Full scan]: scan all the available DAB radio stations
– [Manual tune]: tune to aspecific channel/frequency manually and add it to the
station list.
– [DRC]: add or remove adegree of compensation for the differences in the
dynamic range between radio stations.
– [Language]: Czech/ Slovak/ English
3. To select an option, press SELECT button.
4. Repeats steps 2-3 if any sub-option is available under an option.
3.9. Main Menu
[SYSTEM]
– Clock setup: Set time synchronization by radio or manual; set time and date.
– SW version: know the software version of the unit.
– Factory Reset: reset all the settings to factory default.
Note:
If no button is pressed within 15 seconds, the menu exits. This is not amal-function.
3.10. Listen to FM radio
1. Press FUNCTION button repeatedly to select FM radio.
2. Press SCAN button to start auto scan or
Press TUNE +/- button to tune to aradio station.
3. Press and hold TUNE +/- button to tune to the next strongest radio station.
3.10.1. Mono/ Auto (Stereo) mode
Press ST.MO button to select Audio mode to MONO or AUTO.
SRD 6600 DAB 12j.indb 7 09.09.2016 14:17:38

8 EN
EN
Revision 09/2016Copyright © 2016, Fast ČR, a. s.
Getting Started
3.10.2. Store FM Radio stations manually
1. Tune to FM radio station.
2. Press and hold PRESET button in 3 secs to activate programming mode.
3. Display show P1 and briefly, press TUNE +/- repeatedly to select apreset number
4. Press SELECT to confirm
5. Repeat steps 1-4 to store more FM stations.
3.10.3. Select apreset FM radio station
– In FM mode, to select any preset number; press PRESET.
– Press TUNE +/- repeatedly then press SELECT to select the preset station.
3.10.4. Use FM menu
1. In FM mode, press MENU button to access FM menu.
2. Press TUNE +/- to scroll the menu options:
[Scan setting]
[Audio setting]
[Language] : English / German
[Main menu]
3. To select an option, press SELECT button
4. Repeat steps 2-3 if any sub-option is available under an option.
Scan setting
– [All stations]: scan all the available radio stations.
– [Strong only]: scan stations with strong signals only.
Audio setting
– [Stereo allowed]: scan the radio stations in stereo. (Defaulted)
– [Forced mono]: scan the radio stations with mono only.
3.10.5. Show RDS information
RDS (Radio Data System) is aservice that allows FM stations to show additional
information.
1. Tune to aRDS station.
2. Press INFO repeatedly to scroll through the following information (if available):
[Program Type]
[Radio text]
[Signal strength]
[Date/Time]
[Frequency]
[Stereo/Mono] – Audio mode. This option enables you to set the radio to receive
FM stations in Auto mode (Mono/Stereo) or in Mono only.
SRD 6600 DAB 12j.indb 8 09.09.2016 14:17:38