Sennheiser EW 100 G3 Dimensions

ew 100 G3 Camera Set
RF Wireless Systems | evolution wireless G3
General Description
The ew 100 G3 Camera Set system is ideal for video
recording in various environments, including stu-
dios and the outdoors. The clip-on microphone –
which is included in the ew 100 ENG G3, ew 112-p
G3, and ew 122-p G3 systems – is virtually invis-
ible. The SKM 100 G3 handheld transmitter, which
is included in the ew 135-p G3 system, comes with
an e 835 microphone head and is compatible with
any other capsules from the Sennheiser evolution
series. Each system features 20 channel banks with
one user bank and 12 directly accessible presets.
The included SKP 100 G3 plug-on transmitter con-
veniently transforms any wired microphone into a
wireless one. Each system is ready to use.
Technical Specifications
ew 100 ©
Modulation..................................................wideband FM
Frequency ranges ..........................516–558, 566–608,
......................626–668, 734–776, 780–822, 823–865
Transmission/Receiving
frequencies .................20 channel banks, 1 user bank,
..................................... 12 factory preset channels each
Switching bandwidth.......................................... 42 MHz
Noise reduction system....................... Sennheiser HDX
AF frequency response......................... 25 – 18,000 Hz
S/N ratio (at 1mV and peak deviation) ..... ≥110 dBA
THD (at nominal deviation and 1 kHz) ............≤0.9 %
SK 100 ©
RF output power at 50 Ω............................typ. 30 mW
AF frequency response............. 25 – 18,000 Hz (Line)
Max input voltage transmitter / line.................... 3 Veff
Input impedance transmitter / line ................... 40 kΩ,
............................................................. unbalanced / 1MΩ
Power supply.................................2 AA batteries, 1.5 V
Nominal voltage........................................................ 2.4 V
Operating time..................................................... typ. 8 h
Dimensions .................................. 3.23“ x 2.52“ x 0.94“
Weight .....................................................approx. 5.64 oz
EK 100 ©
Receiver principle............................................... Diversity
Sensitivity (with HDX,
peak deviation)......................<2.5 µV at 52 dBAeff S/N
Adjacent channel rejection................................ ≥65 dB
Intermodulation attenuation............................ ≥65 dB
Blocking ................................................................. ≥70 dB
Pilot-tone squelch.......................................... detachable
AF output voltage (at peak
deviation, 1kHz AF)....................... 3.5 mm jack socket,
.........................................................unbalanced: +12 dBu
Power supply.................................2 AA batteries, 1.5 V
Dimensions ....................approx. 3.23“ x 2.52“ x 0.94“
Weight ........................approx. 5.64 oz (incl. batteries)
Operation time ..................................................... typ. 8 h
System variants and included components:
ew 100 ENG G3 – (1) SK 100 G3 bodypack transmitter, (1) ME 2 omni-
directional clip-on microphone, (1) SKP 100 G3 plug-on transmitter,
(1) CL1 1/8” output cable, (1) CL 100 XLR unbalanced output cable,
(1) CA 2 camera mount, and (1) EK 100 G3 diversity camera receiver
ew 112-p G3 – (1) SK 100 G3 bodypack transmitter, (1) ME 2 omni-
directional clip-on microphone, (1) EK 100 G3 diversity camera
receiver, (1) CL1 1/8” output cable, (1) CL 100 XLR unbalanced output
cable, (1) CA 2 camera mount
ew 122-p G3 – (1) SK 100 G3 bodypack transmitter, (1) ME 4 clip-on
cardioid microphone, (1) EK 100 G3 diversity camera receiver, (1) CL1
1/8” output cable, (1) CL 100 XLR unbalanced output cable, (1) CA 2
camera mount
ew 135-p G3 – (1) SKM 100 G3 handheld transmitter, (1) e 835
dynamic cardioid capsule, (1) MZQ 1 microphone clip, (1) EK 100 G3
diversity camera receiver, (1) CL1 1/8” output cable, (1) CL 100 XLR
unbalanced output cable, (1) CA 2 camera mount
For recommended accessories please visit www.sennheiserusa.com
Features
Sturdy metal housing
Automatic frequency management for transmitter and receiver
Tunable UHF frequencies within a large switching bandwidth
Compact diversity receiver for optimum reception
Adaptive diversity receiver
Wireless synchronization of transmitters via infrared interface
Enhanced frequency bank management with up to 12 compatible
frequencies per bank
42 MHz bandwidth, 1,680 switchable frequencies
Increased range for audio sensitivity
Easy-to-read illuminated dot matrix display
4-level battery indicator for transmitter
More control options (menu)
Enhanced AF frequency range
Contacts for recharging the BA 2015 accupack directly in the transmit-
ter (not SKP 100) or receiver (SKM requires LA2 adapter)
(2) AA batteries for more than 8 hours of use
Frequency scan for finding available frequencies
HDX compander for crystal-clear sound
High RF output power for large range
ew 100 © Camera Set
ew 100 ENG ©
ew 122-p ©
ew 112-p ©
ew 135-p ©

ew 100 © Camera Set
RF Wireless Systems | evolution wireless G3
Technical Specifications (continued)
SKP 100 ©
RF frequency range ................................. 516–865 MHz
Transmission/receiving frequencies....................1,680
Switching bandwidth ......................................... 42 MHz
Frequency response (microphone) .... 80 - 18,000 Hz
Signal-to-noise-ratio ...................................>110 dB(A)
XLR connector ...........................................XLR-3 female
RF output power ..................................................30 mW
Total harmonic distortion (THD) ........................<0.9%
Operating time (transmitter) .................................>8 h
Architect and Engineering Specifications
The wireless microphone system shall feature a true-diversity receiver with 42 MHz of available tuning bandwidth with a total of
1,680 switchable frequencies accessible in 25 kHz steps. The wireless microphone receiver must feature two BNC antenna inputs,
one for each receiver module in the true diversity system. The wireless microphone receiver must feature a backlit display that
displays AF and RF levels, battery telemetry from the transmitter, operating frequency, and diversity switching information. The
wireless microphone receiver must feature an automatic frequency scanning function that utilizes eight banks of pre-coordinated
frequencies that are free of intermodulation interference. The wireless microphone receiver must also feature a user bank in order
to store user defined frequencies. The wireless microphone transmitter must operate on two 1.5V AA battery cells. The wireless
microphone transmitter must have access to 1,680 frequencies tuned in 25 kHz steps across a defined 42 MHz bandwidth. The
wireless microphone transmitter must feature a backlit display that displays frequency information, AF level, battery level. The
wireless microphone transmitter must transmit a pilot-tone squelch. The wireless microphone transmitter must have a specified
RF output power of 30mW.
Limited Product Warranty/Service
Sennheiser Electronic Corporation extends the following limited product warranty for Sennheiser products:
The warranty period for all covered Sennheiser products is two years from the date of purchase. Not covered by this warranty are
accessories and other consumables; for example, items of wear and tear, such as cables. During the warranty period, Sennheiser
Electronic Corporation warrants that the Sennheiser equipment will be free from defects in materials and workmanship used
in making the product. Abnormal conditions, deliberate abuse and damage due to accidents, operator’s error, or unauthorized
service attempts are excluded from any warranty claims. Under this warranty, Sennheiser Electronic Corporation will repair, or
at its option, replace free of charge the covered defective Sennheiser product, provided it is returned (postage paid, with proof
of purchase from the original seller) to a Sennheiser Service Facility. Products should be returned in their original package, or
otherwise suitably protected to avoid shipping damage. Either product registration or a valid, dated proof of purchase is accepted
to establish the warranty period. The Sennheiser Service Department will be the sole authority to determine the validity of all
warranty issues.
This Limited Product Warranty is Sennheiser Electronic Corporation’s only warranty, and the customer’s only remedy concerning
Sennheiser products. All other representations and warranties, express or implied, written or oral, including, but not limited to,
any warranties of merchantability, fitness for a particular purpose, or non-infringement, are expressly excluded. As a result,
except as set forth in the previous paragraphs, the product is sold “as-is” and the customer is assuming the entire risk as to the
product’s suitability for his needs, its quality and its performance.
In no event will Sennheiser Electronic Corporation be liable for direct, indirect, special, incidental or consequential damages
resulting from any defect in the product or from its use, even if advised of the possibility of such damages.
Sennheiser Electronic Corporation
One Enterprise Drive, Old Lyme, CT 06371
Tel: [phone] • Fax: [phone]
www.sennheiserusa.com