Sennheiser E 825 S - Dimensions

Features—Benets
• Metal construction—rugged and reliable
• Shock-mounted capsule—low sensitivity to impact and handling noise
• Hum compensating coil—reduces electrical interference
• Balanced frequency response
• Neodynum ferrous magnet with boron—keeps mic stable regardless of climate
• Falcon ring—consistent sound over time
• Silent on/off switch
• On/off switch (reed switch) can be locked in the ‘on’ position if required
Technical Data
Pick-up pattern cardioid
Frequency response 80–15,000 Hz
Sensitivity(free eld, no load) (1 kHz) 1.5 mV/Pa at 1 kHz, nominal
Nominal impedance 350 Ω
Min. terminating impedance 1 k
Dimensions in inches 1.89 x 7.08
Weight 11.64 oz
Product Variants
e 825-S, EPACK825S (E 825-S, Stand, Cable), THREEPACK 825S (3x825-S)
e 825-S General Purpose Microphone
The e 825 S is a cardioid general purpose microphone ideal for vocal and instrument miking
and club PA. Sound inlet basket: rened steel.
Architect’s Specications
The unit shall be a cardioid vocal and instrument microphone. It shall operate with a frequency
response of 80 Hz–15 kHz.The sensitivity (free eld, no load) shall be 1.5 mV/Pa at 1 kHz, with
a nominal impedance of 350 Ω.The min. terminating impedance shall be 1 k. The unit shall be
1.89 x 7.08 inches, and weight 11.64 oz. The unit shall be a Sennheiser e825 microphone.
Optional Accessories
21' XLR microphone cable MC21N
Grey foam windscreen MZW 4032
Floor stand with boom arm SEMS 3000
Supplied Accessories
1 Protective pouch
1 MZQ 800 Microphone clip
e 825-S
e 825-S
CBinder - MIcrophones.indd 39 11/11/08 2:25:03 PM