Sennheiser Evolution E 835 User manual

FEATURES
Rugged metal body

Excellent feedback rejection

High sound pressure handling capability

Shock-mounted capsule provides excellent

suppression of handling noise
Uniform on- and off-axis response

Cardioid pick-up pattern provides isolation

from other on-stage signals
Hum compensating coil

ARCHITECT’S
SPECIFICATIONS
The microphone shall be a dynamic cardioid
type designed for lead vocal stage use.
It shall have a rugged metal body and a
shock-mounted capsule and shall include
a hum compensating coil.
The frequency response shall be 40 Hz–
16,000 Hz and the sensitivity (free field, no
load) shall be 2.7 mV/Pa at 1 kHz. The nomi-
nal impedance shall be 350 O, with a min.
terminating impedance of 1 kO.
The microphone shall provide a 3-pin XLR
connector. Dimensions shall be 48 x 180 mm
(1.89“ x 7.09“). Weight without cable shall
be 330 grams (11.64 oz). The microphone
shall be the Sennheiser e 835, the variant
with a silent ON/OFF switch shall be the
Sennheiser e 835 S.
The e 835 is a cardioid lead vocal stage microphone specially designed to
perform under pressure. Its balanced frequency response maintains signal quality
when moving on and off axis during performance.
The gentle presence boost ensures vocal clarity
and projection. The minimal proximity effect
provides for consistently clear bass-end perfor-
mance when singing closer to, or further from
the microphone. The cardioid pick-up pattern
provides excellent feedback rejection, enabling
the microphone to handle higher sound pressure
levels. The rugged metal construction and internal
damping isolates handling noise. The e 835 S
variant features a silent ON/OFF switch.
TECHNICAL DATA
Transducer principle (Microphone).....................dynamic
Pick-up pattern........................................................cardioid
Frequency response (microphone).....................40 –16,000 Hz
Sensitivity (free field, no load at 1 kHz) ...........2.7 mV/Pa
Nominal impedance................................................350 O
Min. terminating impedance................................1000 O
Connector..................................................................XLR-3
Dimensions...............................................................d 48 x 180 mm
Weight w/o cable....................................................330 g
DELIVERY INCLUDES
1 e 835
1 microphone clip
1 pouch
Instructions for use
e 835 Lead vocal stage mic, designed to perform under pressure

PRODUCT VARIANTS
e 835 S – cardioid lead vocal stage
microphone with noiseless
on/off switch Cat. No. 004514
RECOMMENDED ACCESSORIES
MZQ 800 universal stand adapter clip for most Evolution
handheld wired microphones Cat. No. 004711
MZW 4032-A anthracite foam windscreen Cat. No. 002978
MZW 4032-C blue foam windscreen Cat. No. 002980
DIMENSIONS POLAR PATTERN
FREQUENCY RESPONSE
Sennheiser electronic GmbH & Co. KG
Am Labor 1, 30900 Wedemark, Germany
www.sennheiser.com
11/12 Sennheiser is a registered trademark of Sennheiser electronic GmbH & Co. KG. www.sennheiser.com. Copyright © 11/2012. All rights reserved. Errors and omissions excepted.
e 835 Lead vocal stage mic, designed to perform under pressure