Sennheiser AC 3000 User manual

8
Bedienungsanleitung
Instructions for use
Notice d‘emploi
Istruzioni per l‘uso
Instrucciones para el uso
Gebruiksaanwijzing
AC3000
Active Transmitter Combiner 8:1
TitelSeite_A5.fm Seite 1 Mittwoch, 6. Oktober 2004 12:41 12

Bedienungsanleitung.......................................................................................................3
Instructions for use.......................................................................................................13
Notice d’emploi............................................................................................................. 23
Istruzioni per l’uso........................................................................................................ 33
Instrucciones para el uso............................................................................................. 43
Gebruiksaanwijzing...................................................................................................... 53
TitelSeite_A5.fm Seite 2 Mittwoch, 6. Oktober 2004 12:41 12

13
8
Instructions for useAC3000
Active Transmitter Combiner 8:1
AC3000_US.fm Seite 13 Dienstag, 5. Oktober 2004 4:17 16

14
Contents
AC 3000 .................................................................................... 13
Active Transmitter Combiner 8:1 ......................................... 13
Contents .................................................................................... 14
Brief description ...................................................................... 14
Safety instructions ................................................................. 15
Delivery includes ..................................................................... 17
Operating elements ................................................................ 17
Connection diagram ............................................................... 18
Putting the unit into operation ............................................ 18
Operation .................................................................................. 20
Troubleshooting ...................................................................... 20
Accessories ............................................................................... 21
Specifications ........................................................................... 21
Garantee ................................................................................... 22
Brief description
With the AC 3000 8-to-1 active transmitter combiner, the
signals of up to eight SR3054 transmitters or up to four
SR 3056 twin transmitters can be combined onto a single
antenna (A 2003 UHF directional antenna or A 1031 U
omni-directional antenna).
The active transmitter combiner allows you to make high-
quality transmission systems with up to 8 channels.
Areas of application:
yMulti-channel in ear monitoring system for broadcast or
stage use
yMulti-channel system suitable for any application where
talk-back signals are to be transmitted (e.g. studio)
AC3000_US.fm Seite 14 Dienstag, 5. Oktober 2004 4:17 16

15
Safety instructions
Danger!
Overheating or overvoltages (caused by lightning striking
themainssupplyetc.)cancauseunitswith a mains connec-
tion to catch fire!
Always set up the unit in a well-ventilated place! Make sure
that the air vents of the unit are not covered or blocked!
Never stack more than two units directly one above the
other! Do not set up the unit near any heat sources and
never expose the unit to direct sunlight (see page 15)! Use
an overvoltage protection or, during a thunderstorm, dis-
connect the unit from the mains!
The AC 3000 contains mechanically moving parts (fans).
Since dust and pollution can impair their function, you
should regularly check the fans for proper operation and
cleanoutany dust ifnecessary.Thefailureof oneorseveral
fans can cause overheating and permanent damage to the
unit.
Warning!
If you open units or use damaged mains cables, you can
receive a dangerous electric shock!
Neveropen the unitand only use undamaged mains cables!
If a unit should be defective, repair must be carried out by
authorized personnel! If units are opened by you in breach
of this instruction, the warranty becomes null and void.
Warning!
If units and cables are set up improperly, persons can be
injured or units can be damaged!
Set up the unit on an even surface or mount it into a rack!
Lay the cables in such a way that no-one can stumble over
them!
AC3000_US.fm Seite 15 Dienstag, 5. Oktober 2004 4:17 16

16
Attention!
If liquids or small parts which conduct electricity find their
way into the interior or to the sockets of the unit, this can
cause a short-circuit which may damage the unit!
Keep liquids and small parts which conduct electricity away
fromtheunit!Useadampclothforcleaningtheunit.Donot
use any solvents or cleansing agents!
AC3000_US.fm Seite 16 Dienstag, 5. Oktober 2004 4:17 16

17
Delivery includes
y1 active transmitter combiner 8:1
y1 mains cable
y1 rack-mounting kit
y4 set of self-adhesive plastic feet
y1 instruction manual
You additionally require BNC cables for connecting the
transmitters and the antenna to the AC 3000, an antenna
(A 2003 UHF passive directional antenna or A 1031 U pas-
sive omni-directional antenna) and up to eight SR 3054
transmitters or up to four SR 3056 twin transmitters.
Operating elements
POWER LED
POWER (ON/OFF) switch
8 RF inputs RF IN 1 to RF IN 8 for connecting the
transmitters
3 low-noise fans
BNC socket for antenna output ANT
IEC mains socket
8 LEDs for RF signal indication
8
   
 


AC3000_US.fm Seite 17 Dienstag, 5. Oktober 2004 4:17 16

18
Connection diagram
The below connection diagram shows the connections for
an 8-channel system.
Putting the unit into operation
Setting up the unit
왘SetuptheAC3000onaneven,horizontalsurfacesothat
it cannot fall over or mount it into a 19" rack.
Warning!
During operation, the AC 3000 and the connected
transmitters produce considerable waste heat! Make
sure that the air vents of the units are not covered or
blockedandprovideforaductofsufficientsizetoensure
a free air flow between the units – especially when
mounting several transmitter combiners or transmitters
into a desk, chassis or rack! Never stack more than two
units directly one above the other!
ANT
8:1
AC3000_US.fm Seite 18 Dienstag, 5. Oktober 2004 4:17 16

19
Connecting the antenna
The AC 3000 active transmitter combiner can be used with
either the A 2003 UHF directional antenna or the A 1031 U
omni-directional antenna. The antenna transmits the sig-
nalsofallconnectedtransmitters.Thesignalsarecombined
onto the antenna output with no distribution attenuation.
왘Connect the antenna to the antenna output ANT .
Note:
Each AC 3000 requires its own antenna! Several
AC 3000s cannot be daisy-chained!
Connecting the transmitters
You can connect up to eight SR 3054 transmitters or up to
four SR 3056 twin transmitters to the AC 3000.
왘Use BNC cables to connect the transmitters to the RF
inputs RF IN 1 to RF IN 8 .
Connecting the mains cable
왘Connect the mains cable to the IEC mains socket  and
to the mains.
Note:
The AC 3000 can be connected to any mains power
supply with 100 V to 240 V AC (50 to 60 Hz).

 


8
AC3000_US.fm Seite 19 Dienstag, 5. Oktober 2004 4:17 16

20
Operation
Turning the AC 3000 on and off
왘To turn the AC 3000 on, press the POWER (ON/OFF)
switch .
The POWER LED lights up red.
왘To turn the AC 3000 off, press the POWER (ON/OFF)
switch  once more. The POWER LED goes off.
RF signal indication
왘The AC 3000 features eight control LEDs  which will
light up if an input signal is present at the corresponding
input.
Troubleshooting
One or several LEDs for input signal indication do not
light up
왘Checkiftransmitters are connectedtothecorresponding
inputs.
왘Check if the corresponding transmitters are turned on.
Disturbed reception or no reception
Possible causes:
yTransmitting antennas are not within the reception area
yTransmitters or receivers are not turned on
yBatteries are not inserted into the receiver or batteries
are low
yThe antennas are not connected correctly
yThe connecting cables are defective
yToo high cable attenuation due to too long antenna
cables or wrong type of antenna cable
yThe selected transmission and receiving frequencies are
not within the frequency window
 
AC3000_US.fm Seite 20 Dienstag, 5. Oktober 2004 4:17 16