Sennheiser BTD 300 User manual

Instruction manual
Notice d’emploi
Manual de instrucciones
Manual de utilização
Bedienungsanleitung
Istruzioni per l’uso
Gebruiksaanwijzing
BTD 300
Audio
BTD300Audio_532802_0909.book Seite 1 Freitag, 21. August 2009 9:34 09

BTD300Audio_532802_0909.book Seite 2 Freitag, 21. August 2009 9:34 09

Español
Português
Deutsch
Français
English
Italiano
Nederlands
BTD300Audio_532802_0909.book Seite 1 Freitag, 21. August 2009 9:34 09

BTD300Audio_532802_0909.book Seite 2 Freitag, 21. August 2009 9:34 09

1
Important safety information
• Please read this instruction manual carefully and
completely before using the product.
• Make this instruction manual easily accessible to
all users at all times. Always include this instruc-
tion manual when passing the product on to third
parties.
• Always keep the product dry and do not expose it
to extreme temperatures.
Safety instructions for Bluetooth devices
•TheradiowavesofaBluetooth®device can impair
the operation of electronic and medical devices.
• Do not use the product in medical facilities, trains
and aircraft, and close to automatic doors, auto-
matic fire alarms or other automatically con-
trolled devices.
BTD300Audio_532802_0909.book Seite 1 Freitag, 21. August 2009 9:34 09

2
• Keep this product at least 20 cm from pace-
makers. Radio waves can impair the operation of
pacemakers.
Intended use
Intended use of this product includes:
• having read this instruction manual, especially
the chapter “Important safety information”,
• using the product within the operating conditions
and limitations described in this instruction
manual.
“Improper use” means using the product other than
as described in this instruction manual, or under
operating conditions which differ from those
described herein.
BTD300Audio_532802_0909.book Seite 2 Freitag, 21. August 2009 9:34 09

3
Lithium-Polymer rechargeable
batteries
The BTD 300 Audio has a built-in Lithium-Polymer
rechargeable battery. If abused or misused, this
rechargeable battery may leak.
Please understand that Sennheiser does not accept
liability for damage arising from abuse or misuse.
WARNING! In extreme cases, the rechargeable bat-
tery may even present
• a heat hazard,
• a fire hazard,
• an explosion hazard,
• a smoke or gas hazard.
BTD300Audio_532802_0909.book Seite 3 Freitag, 21. August 2009 9:34 09

4
Keep away from children.
Do not heat above 70°C/158°F or throw into
a fire.
Do not expose to moisture.
Do not mutilate or dismantle.
Switch rechargeable battery-powered
devices off after use.
When not using rechargeable batters for
extended periods of time, charge them
regularly (about every three months).
Only charge rechargeable batteries
at ambient temperatures between
10°C/50°F and 40°C/104°F.
Dispose of the product, together with the
built-in rechargeable battery, by taking it
to your specialist dealer or your Sennheiser
partner.
BTD300Audio_532802_0909.book Seite 4 Freitag, 21. August 2009 9:34 09

5
BTD 300 Audio
If your audio source, PC or mobile phone does not
support the Bluetooth stereo audio profile (A2DP),
you can use the BTD 300 Audio adapter. The
BTD 300 Audio allows you to extend the functionality
of your devices by adding support for this Bluetooth
profile.
Bluetooth wireless technology provides an interface
for wireless communication between your audio
source, PC or mobile phone and other Bluetooth
enabled devices, e.g. headphones.
Delivery includes
1 BTD 300 Audio adapter
1 charging cable with USB plug
1 instruction manual
BTD300Audio_532802_0909.book Seite 5 Freitag, 21. August 2009 9:34 09

6
Charging the rechargeable
battery
3h
PC
BTD300Audio_532802_0909.book Seite 6 Freitag, 21. August 2009 9:34 09

7
왘Charge the rechargeable battery when the LED
flashes red. When the rechargeable battery is
fully charged, the LED goes off.
Connecting the BTD 300 Audio
For charging the rechargeable battery, use
the mains unit supplied with your PX head-
phones or PX headset. The mains unit is also
available from your specialist dealer (Cat. No.
525776).
TV
PC
BTD300Audio_532802_0909.book Seite 7 Freitag, 21. August 2009 9:34 09

8
Pairing the BTD 300 Audio (I)
왘Make sure that your product is in pairing mode
(see the instruction manual of your headphones
or loudspeaker system).
Memory function
The BTD 300 Audio can save the connection profiles
of up to 5 Bluetooth devices with which it has been
paired. After switch-on, it automatically connects to
one of these devices.
7 s
BTD300Audio_532802_0909.book Seite 8 Freitag, 21. August 2009 9:34 09

9
If you pair the BTD 300 Audio with a sixth audio
source, the saved connection profile of the first
Bluetooth device will be overwritten.
Pairing the BTD 300 Audio (II)
If the BTD 300 Audio does not detect a Bluetooth
device, it switches off after 5 minutes.
BTD300Audio_532802_0909.book Seite 9 Freitag, 21. August 2009 9:34 09

10
Switching the BTD 300 Audio
on/off
3 s
BTD300Audio_532802_0909.book Seite 10 Freitag, 21. August 2009 9:34 09

11
Technical data
PSC 03R-050 mains unit
Input voltage 5 V
Input current max. 140 mA
Rechargeable battery
Charging time
Operating time
3.7 V; 340 mAh;
Lithium-Polymer
~3hrs
14 hrs
Nominal impedance 540 Ω
Audio connection 3.5 mm stereo jack socket
Cable length 10 cm
Weight 20 g
Nominal input voltage 110–240 V~
Nominal input current max. 0.2 A
Nominal output voltage 5 V
Nominal output current max. 0.5 A
BTD300Audio_532802_0909.book Seite 11 Freitag, 21. August 2009 9:34 09

12
Bluetooth
Accessories
Bluetooth®version 2.0 + EDR
Range up to 10 m
Transmission
frequency 2.4 GHz
Protocol A2DP
Codecs SBC, apt-X®
Cat. No. Accessory/spare part
525776 PSC 03R-050 mains unit with
4 country adapters (EU/UK/US/AU)
531407 Micro-USB to USB cable
BTD300Audio_532802_0909.book Seite 12 Freitag, 21. August 2009 9:34 09

13
Manufacturer Declarations
Sennheiser electronic GmbH & Co. KG gives a warranty
of 24 months on this product. For the current
warranty conditions, please visit our web site at
www.sennheiser.com or contact your Sennheiser
partner.
Declaration of Conformity
These products comply with the basic requirements
and other relevant provisions of the following direc-
tives:
• R&TTE Directive (1999/5/EC)
• Battery Directive (2006/66/EC)
• RoHS Directive (2002/95/EC)
• WEEE Directive (2002/96/EC)
The declaration is available at www.sennheiser.com.
Before putting the products into operation, please
observe the respective country-specific regulations!
BTD300Audio_532802_0909.book Seite 13 Freitag, 21. August 2009 9:34 09

14
In compliance with:
Bluetooth
The Bluetooth®word mark and the Bluetooth®logo
are registered trademarks owned by Bluetooth SIG,
Inc. and any use of such marks by Sennheiser
electronics GmbH & Co. KG is under license.
apt-X®is a registered trademark of Audio Processing
Technology Ltd.
USA FCC ID: DMOBTD300A
Canada IC: 2099A-BTD300A
Europe
QD ID B15373
0560
BTD300Audio_532802_0909.book Seite 14 Freitag, 21. August 2009 9:34 09

15
Statements regarding FCC and Industry Canada
This device complies with Part 15 of the FCC Rules
and with RSS-210 of Industry Canada. Operation is
subject to the following two conditions: (1) this
device may not cause harmful interference, and (2)
this device must accept any interference received,
including interference that may cause undesired
operation.
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful inter-
ference in a residential installation. This equipment
generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance
with the instructions, may cause harmful interference
to radio communications. However, there is no
guarantee that interference will not occur in a parti-
cular installation. If this equipment does cause
harmful interference to radio or television reception,
BTD300Audio_532802_0909.book Seite 15 Freitag, 21. August 2009 9:34 09

16
which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the
interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV
technician for help.
This class B digital apparatus complies with the
Canadian ICES-003.
Changes or modifications made to this equipment
not expressly approved by Sennheiser electronic
Corp. may void the FCC authorization to operate this
equipment.
BTD300Audio_532802_0909.book Seite 16 Freitag, 21. August 2009 9:34 09