Sensica sensilift STG100 User manual

English
Table Of Contents
Precautions 2
Contraindications 5
Warnings 6
DRFTM (Dynamic radio frequency) Technology –
How does it work? 7
Intended Use 8
Possible Adverse Eects 9
Device Description 10
User interface description 11
User Instructions 12
Preliminary Test 12
Getting Started 13
Step 1: Prepare your skin 13
Step 2: Device Operation 13
Recommended Treatment 15
Post facial treatment care 17
Cleaning & Storage 18
Troubleshooting 18
Customer Service 19
Device specification parameters 20
Labeling 21

Precautions
• Never use flammable liquids, such
as alcohol (including perfumes,
sanitizers, or other applications
containing alcohol) or acetone to
clean the skin in the hour before
using the device, as it may cause
burning of the skin.
• Do not open or repair the device,
as it may expose you to dangerous
electrical components.
• Do not place, store or use the device
near bathtubs, showers, basins or
other vessels containing water, as
this may cause severe electrocution.
• Do not leave the device unattended
while plugged into the electricity
supply, as it may lead to
electrocution.

• Keep out of reach of children and
pets.
• Not to be used by persons under 18
years of age.
• Children must not play with
the appliance. Cleaning and
maintenance by the user must not
be carried out by children without
supervision.
• Use the device only in accordance
with these Instructions for Use and
for its intended use.
• Do not use the device if any part
of the device is missing, damaged
or lost, if the device is not working
properly, if you see or smell smoke, or
if the device becomes damp or wet.

• Make sure the device is clean, dry
and intact before each use. Cleaning
instructions are detailed in the
Cleaning and Storage section below.
• Do not use the device without first
applying the Base Gel.
• Do not use the Base Gel after its
expiration date.
Note: The Base Gel is for external use
only - avoid direct contact with eyes.
In the event that such contact does
occur, wash the eyes immediately with
water.

5
English
Who Should NOT Use the
Device?
Carefully read the information
below before you begin your
first treatment. If you still have
any doubts or are unsure that
the device is safe for your
use, please consult with your
physician.
Contraindications
Do NOT use the device if you:
• Have an active implant,
such as a pacemaker or
insulin pumps, or if you
have any known severe
heart disorder, such as
arrhythmias.
• Are pregnant or
breastfeeding.
• Suer from severe or
uncontrolled endocrine or
metabolic conditions, such
as diabetes or uncontrolled
thyroid disease.
• Have a damaged immune
system or autoimmune
disorder, such as AIDS or
Lupus, or if you use drugs
that influence the immune
system.
• Suer from blood clotting
disorders, excessive
bleeding or bruising,
damaged wound healing
or if you routinely take
blood-thinning medication.
• Suer from a history of
deep vein thrombosis.
• Have a history of collagen
disorders or suer from
keloid scarring (growth of
extra scar tissue where the
skin has healed after an
injury).
• Have a general extreme
illness, such as hepatitis,
liver disease or epilepsy.
• Suer from sensitive or
damaged skin, such as in
cases of frequent redness
or rash, inflammations,
breakouts (such as
psoriasis), blisters, sores,
infections, acne or extra
dry skin.
• Have diminished or
exaggerated perception of
temperature change.
• Have taken Accutane in the
past 6 months.
• Have a heat-induced
disease or an active skin
disease, such as herpes,
eczema, rashes etc., in the
treatment area.

6
English
• Have skin cancer, areas at
risk of malignancy, or if you
have received radiation
therapy or chemotherapy
within the past 3 months.
Warnings
Do NOT use the device:
• If you have any permanent
implants in the designated
treatment area, including
but not limited to: silicon
or injected chemical
materials, metal plates or
other metal materials.
• If you had plastic surgery,
such as face lifting or
eyelid surgery, or if you had
aesthetic injections of fillers
such as: Hyaluronic Acid,
Collagen, fat or Botulinum
Toxin, in the treatment area
within the past 3 months.
• If you have had a
professional chemical peel
within the past 3 months
with αHydroxyl Acids
(AHA), such as glycolic
acid, or βHydroxyl Acid
(BHA), or if you had a
professional facial abrasion
such as: dermabrasion,
facial resurfacing, deep
chemical peeling (phenol,
Trichloroacetic acid-TCA),
and/or ablative laser
treatments within the past
3 months.
• Over nostrils, lips of the
mouth, ears, breast or
genital area, or areas not
recommended in this user
manual.
• Over the thyroid since it
may cause adverse events.
• Over the eyelids, eyes or
sides of the eyes (next to
your nose), since it may
cause eye damage.
• If you have any metal items,
such as jewelry or piercings,
or tattoos or permanent
make up on the designated
treatment areas.
• Over sunburns, dark brown
or black spots such as:
freckles, birth marks, moles
or blisters in the treatment
area.
• If you are allergic or
sensitive to chrome, nickel
or any component of the
Base Gel.
• The appliance may be
used by persons with
reduced physical, sensory
or mental capabilities or
lack of experience and

7
English
knowledge provided that
they are under supervision
or have been instructed
in the safe use of the
appliance and that they
understand the hazards
involved.
• Do not use the device over
hairy areas of the body, as
this may result in the hairs
being burnt.
Note: If you have undergone
any other aesthetic
procedures in the designated
treatment area, or if you
have treated the skin with
a prescribed drug within
the past 3 months, or if you
have any concerns regarding
potential adverse eects,
please consult your physician
before using the device.
DRFTM (Dynamic
radio frequency)
Technology – How
does it work?
This device brings a new
approach to non-invasive
skin rejuvenation featuring
Sensica proprietary Dynamic
RF technology, combining
clinically proven RF (Radio
Frequency), commonly used by
doctors, with advanced facial
massage.
Radio Frequency (RF) is a form
of electromagnetic energy,
intended to reduce wrinkles,
tighten the skin, and renew
skin elasticity. It is suitable for
all skin tones, easy to use, and
provides noticeable, long-
lasting results.
RF technology has been used
in doctors’ clinics for several
years and was found to be
highly eective. The device
has two electrodes that
deliver the RF energy into the
skin to contract collagen fibers
and stimulate the natural
production of collagen, which
decreases as we age. If used
correctly and according to
the Recommended Treatment,
the device will reduce the

8
English
appearance of wrinkles as well
as tighten the skin and renew
elasticity. Results may be
visible after just one treatment.
Please make sure to
carefully read this
user guide before you
start your treatment.
The user guide can
also be found at
www.sensica.com
Intended Use
The device is intended:
• For women and men who
want to: reduce facial
wrinkles, tighten their
facial skin, and renew skin
elasticity.
• For use on: face, cheeks,
“smile” folds, “crow’s feet”,
forehead, chin, jawlines,
allowed areas of the neck,
décolletage, and hands.
• For use on fine to moderate
depth wrinkles.
• To be used with the Base
Gel. This gel is especially
designed to work with
Sensica RF devices and
ensures proper delivery of
RF energy. This will provide
the best possible results by
improving contact between
the device and the skin to
improve skin conductivity.
Note: Sensilift is especially
designed for your own
personal treatment and is
intended for a single user and
home use only.

9
English
Possible Adverse Eects
When using the device according to the Instructions for Use,
adverse eects are rare. However, every aesthetic procedure,
including the usage of home-use devices, may cause some
degree of adverse eects (as listed in the table below).
In case adverse eects appear, stop using the device and
consult with your physician if necessary.
Mild adverse eects should be spontaneously relieved within a
few hours.
Severity of
Adverse Eect
Frequency of
Adverse Eect Adverse Eects
Mild Common
Local pain
Skin irritation
Skin redness
Skin sensitivity
Allergies or sensitivity to the Base Gel
Moderate Rare
Mild skin burns
Pigment changes
Excessive redness and swelling
Urticaria, purpura or ecchymosis
Hematoma
Severe Extremely Rare
Severe burns
Infection
Bruising
Blistering

10
English
RF electrodes
combined with
massage fingers
Temperature
sensors
Massage
selection touch
button
Power
socket
RF energy
selection
touch button
1-3 RF energy
level lights
1-2 Massage
level lights
Status
indicator
Device Description

11
English
User interface description
1. ON/OFF and energy selection button - A gentle touch on the
button (after the device is connected to the power supply) will
turn the device ON at energy level 1, shown by 1 illuminated
light in the energy level display. Once it reaches the highest
level, another gentle touch will turn the device OFF. The
device will switch to standby mode when left unattended for
45 seconds.
2. Status indicators
Status indicator
Blinking yellow
light
The device is in standby mode.
In case of no light, make sure the
power cord is plugged-in properly.
Steady green
light
The device is in treatment mode.
RF is activated, skin contact is
detected, and the treatment is
undergoing.
Blinking
alternating
green and yellow
lights
The device is in error mode. The
device detected a malfunction
and prevents the activation of the
RF and massage functions.
RF energy level
selection touch
button
1-3 energy levels
lights
When the green light is on, it
indicates that the RF energy is
active. Touch the RF energy level
selection button repeatedly until
you reach the desired level: 1, 2,
3 or o.
Massage level
selection touch
button
1-2 massage
level lights
When the green light is on, it
indicates that the massage
function is active. Touch the
massage level selection button
repeatedly until you reach the
desired level: 1, 2, or o.

12
English
User Instructions
The device is intended for use
on: cheeks, nasolabial “smile”
folds, “crow’s feet” (next to your
eyes), forehead, chin, allowed
areas of the neck, décolletage
and hands.
What to Expect
During your treatment, it is
normal to experience:
• Sensations of warmth
created by the RF energy.
• Some mild red or pink color
on the skin – during and
just after each treatment.
Preliminary Test
The preliminary test is intended
to determine your skin’s reaction
to the treatment and help you
find the optimal settings for
each treatment area.
Perform a preliminary test on
each area you intend to treat
48 hours prior to the first full
treatment.
• Prepare your skin as
described below in
Step 1: Prepare your skin.
Instructions for operating
the device can be found
below in Step 2: Device
operation.
• Before using the device,
apply an even layer of the
Base Gel on the treatment
area.
• Start your test with energy
level 1 and massage level
1 and move the device in
small circular motions.
• Increase the energy and
massage levels according
to your comfort. Stop
the test if you do not feel
comfortable or if you see
adverse eects.
• Perform the preliminary
test for a total time of
about 3 minutes.
• Wait 48 hours and examine
the tested area.
• If the skin in the tested area
appears normal and no
adverse eects are present,
you can proceed with a full
treatment at the highest
comfortable energy level
that you tested.
Note: You may select any
RF energy level that you find
comfortable. The RF energy
level indicates the rate at
which the temperature rises
when in heating mode. A high
RF energy level will enable

13
English
faster and more even heating.
You can achieve maximum
results with all RF energy levels,
but, for lower levels, it will
take more time to reach the
eective temperature.
Getting Started
Step 1: Prepare your skin
1. Prior to use, make sure your
skin is dry, clean and free of
topical products such as:
moisturizers, liquids or lint.
2. Remove jewelry from the
treatment area as well as
from your hands, prior to use.
3. Never use flammable
liquids such as alcohol
(including perfumes,
sanitizers, or other
applications containing
alcohol) or acetone on the
skin one hour before using
the device as it may cause
burning of the skin.
4. The device is suitable for
men. However, male users
should make sure their skin
is clean-shaven before
treatment.
Step 2: Device Operation
Note: A preliminary test should
be conducted separately for
each area you intend to treat
before proceeding with a full
treatment in that area. See
Preliminary Test section above.
1. Make sure the device is
clean, dry and intact prior
to use.
2. Apply an even layer of
Base Gel, included in your
kit, on the area of your skin
intended for treatment.
3. Set the Radio Frequency
(RF) energy level and the
massage speed to the
level you selected in your
preliminary test treatment.
Gently touch the RF energy
level selection button
repeatedly until you reach
the desired level: 1, 2, or 3.
Gently touch the massage
level button repeatedly
until you reach the desired
level: 1 or 2.
4. The activation of either RF
or massage functions can
be done independently or
together. Both functions
will be activated at level 1.

14
English
Select dierent levels based
on the preliminary test.
5. Sensilift is equipped with
2 safety sensors which
will keep the temperature
in the eective and safe
range during the entire
treatment.
Note: The device stops
the heating when desired
temperature is achieved;
heating is then re-activated
when the temperature beings
to drop.
6. Place the treatment
fingers on the intended
area, ensuring full contact
with your skin during the
entire treatment. Sensilift
will indicate the proper
skin contact by the green
status light. If Sensilift is
not properly placed, the RF
energy will not be delivered.
Note: The device will
automatically turn-o after 45
seconds of no skin contact.
7. If you do not feel
sensations of warmth after
approximately 10 seconds,
try moving Sensilift on a
smaller treatment area,
and/or increasing the RF
energy.
8. Move the device on the
treated area in slow circular
or back and forth motion
while constantly and firmly
contacting the skin.
9. See treatment areas,
treatment time and
treatment schedule in the
Recommended Treatment
section.
10. After completing the
treatment, wipe o the
remaining Base Gel from
the treated area.
11. Cleaning instructions for
before and after treatment
are depicted in the
Cleaning & Storage section.

15
English
Treatment Area Recommended
Treatment Time
Recommended
Device Movement
Forehead 10 minutes
Slow up and down
motion across the
forehead
“Eleven” 5 minutes
Small circular
movements or up
and down
"Crow's
feet"
5 minutes
for each side
Continuous, slow
'side to side'
circular motions
Cheeks 5 minutes
for each side
Slow circular
motions across the
cheek
Recommended Treatment
• Place the treatment fingers as indicated in the picture of the
chosen treatment area.
• Continuously move the device as described for the chosen
treatment area.

16
English
"Smile folds" 5 minutes
for each side
Slow up and
down motions
over the "smile
folds"
Chin 5 minutes Side to side
Jawline 5 minutes
for each side
Slow up and
down motions
along the jaw
Neck 5 minutes
for each side
Slow up and
down motions
across the neck
Decolletage
5 minutes
for each 4cm2
sub-area
Slow circular
motions across
decolletage
Hands
5 minutes
for each 4cm2
sub-area
Slow circular
motions across
hands

17
English
Warning: avoid
contact with the eyes,
eye cavities, nostrils
and oral cavity, as
treatment in these
areas may cause
adverse eects.
Warning: avoid
treatment in the lower
third of the neck since
this area is more
sensitive and avoid
treating the thyroid
area (marked ).
• For long-lasting results, use
the device once a week
on each desired area for a
period of 8 weeks.
• Response to the
treatment diers between
individuals and depends
on environmental and
biological factors, heredity
and aging.
• To sustain optimal long-
term results, maintenance
treatments may be
performed as needed every
4-8 weeks.
Post facial treatment
care
• We recommend you
also use Sensica’s anti-
aging cream to increase
treatment ecacy and
ensure long-lasting results
(available for purchase at
www.sensica.com).
• Apply a high-factor
sunscreen (at least 30 SPF)
and protect the treated
area from sunlight for two
weeks following treatment.
• Following the treatment,
avoid any usage of hot
water on your face and
discontinue usage of
abrasive or harsh products
for two days.
• Makeup may be applied
immediately after
treatment.

18
English
Cleaning & Storage
• Make sure to turn o and
unplug the device before
cleaning.
• It is recommended to clean
the device, especially
the treatment fingers,
temperature sensors, and
silicone cover, of residual
Base Gel with a soft damp
cloth or wipes.
Do not rinse the
device under running
water, as it may cause
device malfunction.
• Keep the device dry. Never
place, store or use the
device near: bathtubs,
showers, basins or other
vessels containing water
as this may cause severe
electrocution.
Troubleshooting
If you experience any problems
with your device, please refer
to the information below to
attempt to resolve it:
• If the device does not turn
on:
1. Make sure that the power
cord is plugged properly
into the electrical outlet
and into the device
power socket.
2. Make sure the power
outlet has power.
• If you cannot feel heat:
1. Verify full contact with
the skin (indicated by a
green light).
2. Verify that you applied
enough Base Gel.
3. Remember that the
device reacts to your
skin and may temporarily
reduce heat for safety
reasons.
See status indicator table in
the User Interface Description
section.

19
English
• In case of dirt or debris
on the treatment fingers,
you should clean them
in accordance with the
Cleaning & Storage
section. If you can't get the
area clean, contact our
customer service.
• In case of a general
error, reset the device by
unplugging the power cord
from the electrical outlet on
the wall, wait 10 seconds
and then reconnect it.
If you still have problems with
your device, please contact
our customer service.
Customer Service
If your device has broken/
stopped working or if you
need any further assistance/
information, please contact
us. You may also contact us to
order additional Base Gel or
you can purchase it online at
sensica.com.
For customer service, please
see contact details on inner
back cover.

20
English
Device specification
parameters
The RF handheld device is
powered by bipolar RF at
10±0.5Watt
Frequency
1±0.05MHz
Selectable output power level
3 levels
Mechanical massage
Implemented by moving RF
electrodes.
Speed
50-100 RPM
Temperature sensors
RF heating is automatically
deactivated when skin
temperature reaches
40°C/104°F. The heating is
reactivated when temperature
decreases.
Treatment area
~2.2cm2/ 0.34in2
External power supply
Input 100-240VAC, 50-60Hz,
Output 9VDC, 1.5A
Device size and weight
140g, 173mm x 56.8mm x 53.1mm
4.93oz, 6.8in x 2.23in x 2.09in
Storage and transport conditions
Temperature -25°C to 70°C
(-13°F to 158°F)
Humidity 10% to 90% RH
at 55°C/131°F
Pressure Non-condensing
Operational conditions
Temperature 5°C to 40°C
(41°F to 104°F)
Humidity 20% to 80% RH
Max operating
altitude 3,000 m.
Storage Instructions