Sensica sensiLift User manual

01 Getting Started
Hey ! I'm Sensica's
beauty consultant,
and I'm here to
help you with
some extra tips…
The massage feature
is all about getting
into the deep layers
of the skin - it's what
makes this device
so effective.
1. 48 hours before starting your first full
treatment, perform a preliminary test
on each area you intend to treat.
2. Plug the device into an electric socket.
You should see the “status indicator”
blinking yellow. (front light)
3. Make sure your skin is clean and dry,
free from creams and make up.
4. Apply an even layer of Base Gel on the
area intended for treatment.
5. Set the energy level by pressing the RF
button (see below) repeatedly,
until you reach the desired
level: 1, 2 or 3.
6. Press the Massage button
(see below) to set the desired
massage level: 1 or 2.
RF Button -
Massage Button -
Remember,
patience is key
Always do a
preliminary test
before beginning
a full treatment.
Start at RF level
3, and reduce the
energy level to
suit your comfort.
Hi, welcome to Sensica.We're so excited
for you to start your journey to younger
looking skin. Before you do your first
treatment, check out this Quick Guide
with extra tips for best results.
WWW.SENSICA.COM
MD 04181 A3

2
03 Optimizing Results
Remodelling
and changes
in collagen
production may
take time. Be
patient - you
will see results
within 8
treatments.
The secret to
getting the best
result is to stick
with the protocol
and persevere.
Feel free to ask me any question
about your skin or this treatment at:
[email protected]
02 Treatment Schedule
Warranty Card
Congratulations on your Sensica purchase!
We have every faith in the quality of each Sensica device - we
know they meet the highest standards, because we subject
them to rigorous quality and performance testing. In the unlikely
event that you do find a defect in a Sensica device, it may be
covered by this warranty.
Enter your serial number on our website to activate your warranty.
Saisissez votre numéro de série sur notre site internet pour activer votre garantie.
Inserisci il tuo numero di serie sul nostro sito Web per attivare la garanzia.
Geben Sie zur Garantieregistrierung Ihre Seriennummer auf unserer Website ein.
Introduzca su número de serie en nuestro sitio web para activar su garantía.
www.sensica.com
Two Year Limited Warranty
where an original receipt is
provided. This warranty is limited
to devices proven to be defective.
In order to obtain warranty
service on your Sensica device,
please go to our website or call
our customer service center
for assistance (you will find the
number at www.sensica.com).
Sensica requires proof of
purchase. Please provide an
invoice or purchase receipt
showing the date of purchase
of the device
This warranty covers only Sensica
devices. Other Sensica products,
such as pads or creams, are
defined as consumables and
therefore excluded from warranty
coverage.
This limited warranty covers
manufacturer defect related
problems in your Sensica device,
if you purchased it directly from
www.sensica.com or from an
authorized partner. Warranty
approvals will only be granted
1. Place the RF electrodes (massage
fingers) in full contact with your skin.
2. You should see a steady green light
in the “status indicator” as soon as
there is full contact with the skin.
3. Move the device over each
treatment area in circular motions
for 5 minutes (10 minutes for
forehead).
4. The treatment will create a warm
sensation on your skin.
5. Wipe o any Base Gel residue
from the treated area. To enhance
results, apply Sensica "Age Defying"
cream (also available at www.
sensica.com).
6. For best results, use Sensilift once a
week on each area for the period
of 8 weeks.
1. Results of Sensilift treatments may
dier between individuals, depending
on enviromental and biological
factors, heredity and age.
2. The device delivers RF energy only
when the green light is steady. If this
doesn't happen after a few seconds,
try these steps:
- make sure you have selected an RF
level.
- make sure the RF electrodes
(massage fingers) are in full contact
with the skin.
- make sure you have applied enough
Base Gel to facilitate good contact.
3. If you don’t feel heat being delivered to
the treatment area during treatment:
- make sure the status indicator has
a steady green light.
- increase the RF level.
- decrease the treatment area and
reduce the radius of your circular
motion.
4. To sustain optimal long term results,
maintenance treatments might
be performed every 4-8 weeks, as
needed.
You can use a
mirror during
treatment to
keep an eye on
the light.
The safety
mechanism in
the device will
regulate the RF
energy level to
suit your skin
temperature, so
don't worry if
you feel the heat
come and go
throughout the
treatment.
Don't be
tempted to treat
your whole face
in one go - stick
to areas the size
of a business
card.
That's it!
Your skin will feel lifted,
smoother and tighter.
Enjoy!