Sensica Sensismooth User manual

1
English
Sensismooth 2
What to expect when using Sensismooth 3
Device description 4
User instructions 5
Important cautions and warnings 7
Cleaning and troubleshooting 8
Customer service 9
Register your device 9
Frequently asked questions 10
Device specifications 11
Table of contents

2
English
Sensismooth
The essential for your
daily skin care routine.
Sensismooth is a professional
multi-treatment device that
uses unique patented pads
with Adapt2UTM technology.
Revolutionary Adapt2UTM
pads are designed to deliver
superior ecacy with each
treatment perfectly adapting
to your body’s unique angles
and curves. The snap-on
pads are flexible, soft and
supple, perfectly shaping to
your face, feet and body’s skin
surface, eortlessly allowing
you to enjoy a smooth
personalised experience while
achieving visible results.
Sensismooth is a full solution
device with 3 dierent
treatments:
Adapt2UTM Cleanse – Gently
cleans pores without being
abrasive, removing excess
make-up residue and daily
build-up. The cleanse pad
flexes and contours to your
face as it glides gently over
your skin to eectively treat
the entire area, refining
pores and reducing the
appearance of fine lines.
The result is a smoother
and more radiant skin.
Adapt2UTM Pedi – The pedicure
pad is designed to treat
aected areas by removing
rough, dry and calloused skin
from the feet and heels. Our
Adapt2UTM pedicure pad has a
diamond finish guaranteed to
deliver superior results, giving
you amazingly smooth skin.

3
English
Adapt2UTM Exfoliator –
Gliding over even the
toughest of curves like elbows
and knees eortlessly, the
exfoliator pad smooths,
revives and rejuvenates
your skin, enhancing blood
circulation while allowing
for better absorption of skin
care products, enabling
your skin to be more
invigorated and elasticised.
What to expect
when using
Sensismooth
• A slight warming sensation
during skin peeling and
pedicure treatments.
• A fine residue of dead skin
cells on the treated area–
you may notice a thin white
layer during and just after
using the Sensismooth
abrasive pads.
• The Sensismooth device
is pressure sensitive and
comes equipped with a
safety feature that stops
it from working if pressed
too hard against the skin.

4
English
b
c
a
Device description Note: Each Sensismooth kit
comes with a dierent set
of pads, as displayed on
the outside of the box.
Cleanse Kit:
Adapt2UTM Deep
Cleansing pad
Sensitive Face
Brush pad
Exfoliate Kit:
Adapt2UTM Peel pad Full Body
Exfoliating pad
Pedicure Kit:
Adapt2UTM
Pedicure pad
Feet Pumice pad
d
aPad
bON/OFF button/
speed button
cCharge indicator/
Battery status
dUSB charger

5
English
User instructions
• The Sensismooth kit includes
a USB cable for charging.
• Before the first use, charge
the device overnight.
• A full charge allows up
to 90 minutes of use.
• Snap-on the pad for the
desired treatment.
• The device includes
two speeds levels.
• Press the ON/OFF button
and hold for 1 second
to activate the device
on speed level 1.
• Shortly press again if
you want to activate
speed level 2.
Sensismooth is now
ready for use!
• The device must be turned
o before replacing pads.
• To turn o the device,
press and hold the ON/
OFF button for 1 second.
Status indicators:
• Blinking green light
indicates charging.
• Solid green light indicates
fully charged.
• Blinking red light indicates
battery low (charge
the device shortly after
light begins to flash).
1. To extend the life of your
cleanse pad, you may
want to clean your skin
and remove any excess
make-up residue before
starting a treatment.
2. Snap-on the cleansing pad
to the device adaptor.
3. Wet your skin and the
cleanse pad head
with warm water.
4. Apply cleanser to
your skin or pad.
5. Gently move the brush in
small circular motions over
the desired treatment area.
6. Turn OFF, then clean
the used pad.
Cleansing