Sound Sation MHL-12W-36Z-RGBWAPV Instruction sheet

Product Profile:
Power supply: 110-230V AC 50/60Hz
Power consumption: 420W
Light source: 36 peaces 12W six in one LED (Red, Green, Blue, White,
Amber, Purple)
DMX control channel: 17
DMX 512 connection: 3-pin XLR
Flash-rate: 25Hz
Maximum PAN-movement 630°: In 2.5s
Maximum TILT-movement265°: In 1.5s
Number of LED: 36
Beam angle: approx. 40°
Dimensions: 33*22*45 cm Weight: 9 kg
DMX Values and Functions
CH1 Pan 0—255 Pan
CH2 Tilt 0—255 Tilt
CH3 Dimmer 0－255 Dimmer
CH4 Strobe 0—255 Strobe
CH5 Red 0—255 Red
CH6 Green 0—255 Green
CH7 Blue 0—255 Blue
CH8 White 0—255 White
CH9 Amber 0—255 Amber
CH10 Purple 0—255 Purple
CH11 Pan / Tilt Speed 0—255 Pan / Tilt Speed
CH12 Manual RGBWAP Mixing
Colors
0—255 Manual RGBWAP Mixing
Colors
CH13 Pan Fine 0—255 Pan Fine
CH14 Tile Fine 0—255 Tile Fine
CH15 Auto Function 0—255 Auto Function
CH16 Zoom 0—255 Zoom
CH17 Reset 0—255 Reset
Product Instruction
MHL-12W-36Z-RGBWAPV
36*12W (six in one) (RGBWAP)
LED Moving Head Light

Menu Operation Instructions:
One: Set DMX Address code:
1、Press “Menu button to Set DMX Address, to confirm by press
“ENTER” button.
2、Show Set DMX address DMX address: 001, correct by pressing
“UP&DOWN” button
3、Press “ENTER” button to save and quit. Press “MENU” button to quit
no saving
Two: Set built-in program:
1、Press “Menu” button to Set run program ，to confirm by press
“ENTER” button.
2、Press “ENTER” button to save and quit. Press “MENU” button to quit
no saving.
Three: Setting Reversed Pan:
1、Press “Menu” button to Set Pan Reverse, confirm by press “ENTER”
button.
2、Show Set Pan No/Yes, correcting by “UP&DOWN” Button
3、Press “ENTER” button to save and quit. Press “MENU” button to quit
no saving.
Four: Setting Reversed Tilt:
1、Press “Menu” button to Set Tilt Reverse, confirm by press “ENTER”
button.
2、Show Set Pan No/Yes, correcting by “UP&DOWN” Button
3、Press “ENTER” button to save and quit. Press “MENU” button to quit
no saving.
Five: Setting Balance：
1、Press “Menu” button to Set Balance，confirm by press “ENTER”
button.
2、Show Adjust red Value: 255 correct by pressing “UP&DOWN” button.
3、Press “ENTER” button to save and quit. Press “MENU” button to quit
no saving.
4、Press” MENU” button to quit balance setting
Six: Setting DMX Channel:
1、Press “Menu” button to Set Run Channel，confirm by press “ENTER”
button.
2、Show DMX Channel 12CH，Correct by pressing “UP&DOWN”
button.
3、Press “ENTER” button to save and quit. Press “MENU” button to quit
no saving.
Eight: Setting Master-slave Mode:
1、Press “Menu” button to Set Mast Mode，confirm by press “ENTER”
button.
Show Run Slave，correct by pressing “UP&DOWN” button., Mast
2、mean Master machine, Slave mean slave machine Mast OFF mean
master-slave off。
3、Press “ENTER” button to save and quit. Press “MENU” button to quit
no saving.
Nine: Setting LCD light:
1、Press “Menu” button to set LCD Light, confirm by press “ENTER”
button.
2、Show Light ON/OFF, correct by pressing “UP&DOWN” button.
3、Press “ENTER” button to save and quit. Press “MENU” button to quit
no saving.
Ten: Checking software version:
1、Press “Menu” button to Display Ver.，confirm by press “ENTER”
button.Show software version。Press “MENU” to quit
Eleven: Setting Sound Activation ON/OFF:
1. Press “Menu” button to set sound active mode, Confirm by press
“ENTER” button.. Show sound active ON/OFF, correct by pressing
“UP&DOWN” button.Press “ENTER” button to save and quit. Press
“MENU” button to quit no saving.
Twelve: Run Manuel Mode:
1、Press “Menu” button to Run manual mode，Confirm by press “ENTER”
button.Show Run manual Adjust Red，Press “UP&DWON” button to
choose the wanted channel, Red，Green，Blue，PAN，TILT，to enter
by pressing “ENTER” Button.
2、Press “UP&DWON” button to correct, Press” ENTER” Button to save
or quit the above menu.
3、Press” ENTER” Button to quit manual mode.