Seville Classics airLIFT OFF64801B User manual

Telephone: [phone]
Fax: [phone]
Hours: 8:30 AM – 4:30 PM (PST)
Email: [e-mail]
Homepage: www.SevilleClassics.com
112021
AIRLIFT® XL Sit-Stand Mobile Desk
Model #: OFF64801B, WEB664, OFF92003
Thank you for choosing Seville Classics! We hope that you enjoy your new
mobile desk cart. Please read through this user guide for parts list,
assembly instruc�ons, frequently asked ques�ons and further contact
informa�on.
112021
Safety
Do not tip the desk over or place upside down. Do
not place more than 35 lbs. on the desk top.
Dimensions: 28.1" W x 19.6" D x (27.1" to 41.9") H
Weight capacity: 35 lbs.
Weight: 34.6 lbs.
Specifications

1
Screwdriver
Required Tools (not included)
Power Drill
G. Bolts (10)
Parts List
A. Top (1)
B. Cylinder (1)
C. AIRLIFT lever (1)
NOTE: Item is attached
to Cylinder (B)
D. Base (1)
E. Caster (2)
F. Locking caster (2)
H. Washer (4)
I. Split-lock
washer (4)
J. Wrench (1)
K. Hex key (1)
L. External-tooth
lock washer (3)
M6x15
Ø 8
Ø 8
14mm
5 mm
Ø 6
1. Roll desk into desired 
2. Lock casters to prevent the table from rolling.
3. To  pull up on the adjustment lever.
4. To lower, pull up on the adjustment lever while pressing down on
the table top.
5. Release adjustment lever to lock-in table height.
FAQs
Q. Can I use it without the wheels?
A. No. The base is not flat and will wobble without wheels.
Q. How high and how low can my desk go?
A. Maximum height is 41.9 inches. Minimum height is 27.1 inches.
Q. Why won’t my desk adjust its height?
A. The adjustment wire may not be clipped into the adjustment lever
correctly. Reference the diagram in STEP 2 for an example.
Q. Why is my desk not locking?
A. If it is not locking contact [email protected].
Desk may not adjust  being unused for a  To fix this,
pull up on the adjustment lever and lightly "pump" the desk top up
and down. The desk should now rise smoothly.
6
Get help with assembly and report damaged or missing parts.
Email: [email protected]
Telephone: [phone]
Homepage: www.SevilleClassics.com
Hours: 8:30 AM - 4:30 PM (PST)
Get help with assembly and report damaged or missing parts.
Email: [email protected]
Telephone: [phone]
Homepage: www.SevilleClassics.com
Hours: 8:30 AM - 4:30 PM (PST)

Congratulations! Enjoy Your New AIRLIFT Desk!
5
Assembly Instructions
2
STEP 1.
Place the TOP (A) face
down so the mounting
plate faces up.
CAUTION: Place a blanket
between the top and hard
floors to avoid scratches.
Line up the holes on the
CYLINDER (B) with holes
on the mounting plate.
Attach with BOLTS (G)
using HEX KEY (K).
Tighten until snug.
IMPORTANT: Make sure
AIRLIFT LEVER (C) can
reach the mounting holes
on the back of the TOP (A).
STEP 2.
Press the adjustment wire
into the bracket on the
back of AIRLIFT LEVER (C).
IMPORTANT: Lever will
not work and height will
not adjust if wire is not
clipped in correctly.
Get help with assembly and report damaged or missing parts.
Email: [email protected]
Telephone: [phone]
Homepage: www.SevilleClassics.com
Hours: 8:30 AM - 4:30 PM (PST)
Get help with assembly and report damaged or missing parts.
Email: [email protected]
Telephone: [phone]
Homepage: www.SevilleClassics.com
Hours: 8:30 AM - 4:30 PM (PST)

STEP 3.
Line up the holes of the
AIRLIFT LEVER (C) with the
holes on the back of the
desk.
Secure the adjustment
lever with BOLTS (G)
and HEX KEY (K).
STEP 4.
Turn the BASE (D) upside
down and fit over the end
of the CYLINDER (B).
Match the holes on the
the holes on the cylinder.
Slip EXTERNAL-TOOH LOCK
WASHERS (L)
BOLTS (G).
BASE (D) to
CYLINDER (B) with all bolts
and washers.
Tighten BOLTS (G) with the
HEX KEY (K) in a clockwise
pattern until flush with
BASE (D).
3
STEP 5.
LOCKING CASTERS
(F) to the long legs of the
base through SPLIT WASH-
ERS (I) and WASHERS (H).
Repeat for CASTERS (E) on
short legs of base.
included WRENCH (J).
STEP 6.
Tighten all screws on the
top, cylinder, adjustment
Flip the desk onto its
wheels.
4
Get help with assembly and report damaged or missing parts.
Email: [email protected]
Telephone: [phone]
Homepage: www.SevilleClassics.com
Hours: 8:30 AM - 4:30 PM (PST)
DO NOT TIGHTEN
BOLTS UNTIL ALL ARE
ATTACHED.
Get help with assembly and report damaged or missing parts.
Email: [email protected]
Telephone: [phone]
Homepage: www.SevilleClassics.com
Hours: 8:30 AM - 4:30 PM (PST)