Seville Classics WEB718 User manual

Customer Service Informaon
Telephone: [phone]
Fax: [phone]
Hours (M-F): 8:30 AM – 4:30 PM (PST)
Email: [email protected]
Homepage: www.SevilleClassics.com
Cauon
•Place heavier items on the lower shelves and lighter ones
on the top. Do not stand or climb on the shelving system.
•Do not drop heavy items on the system.
•Do not move the system while loaded.
•Note that this shelving is intended for indoor use in dry
environments.
V03152022
Specicaons
Dimensions: 36" W x 14" D x 54" H (57" H with wheels)
Weight capacity Per shelf Overall
On leveling feet 300 lbs. (136 kg.) 1500 lbs. (680 kg.)
On wheels 27.5 lbs. (12.4 kg.) 130 lbs. (58.9 kg.)
Addional parts and accessories are available for purchase online at:
www.SevilleClassics.com
4-Tier Steel Shelving, 14” x 36 x 54”
with wheels
V03152022
Model #: WEB718, WEB719
Thank you for choosing Seville Classics! We hope that you enjoy your
steel wire shelving unit! Please read through this guide for parts list,
assembly instructions, frequently asked questions and further contact
information.
Seville Classics

Parts List
B. Top poles (4)
(Plasc cap on end)
Please make sure you have all the parts on this list.
If you’re missing parts, contact us for replacements at
[phone] or send an email to Supp[email protected]m
1
D. Shelf (4)
F. Leveling feet (4)
G. Slip sleeves (34)
H. Wheels (4 Total,
2 - Non-Locking
2 - Locking)
E. Top pole cap (4)
or
Assembly Instrucons
A. Boom poles (4)
(Threaded end)
C. Connectors (4)
(May be aached to poles)
2
STEP 3.
Repeat STEP 2 for next shelf.
TIP! If necessary, lightly tap shelves
into place with a rubber mallet.
STEP 4.
Screw CONNECTORS (C) into top of
BOTTOM POLES (A).
Screw TOP POLES (B) to CONNECTORS
(C).Snap in the TOP POLE CAPS (E) to the
tops of the TOP POLES (B).
TIP! Connectors may already be installed,
if this is the case just screw in the top
poles to the bottom poles.
Congratulations!
Enjoy your now fully
assembled shelving unit.
x2 x2
STEP 1.
Screw LEVELING FEET (F) or WHEELS
(H) into base of bottom poles.
Repeat for all bottom poles.
B
C
E
STEP 5.
Repeat step 2 for
the remaining
shelves.
D
A
G
F or H
STEP 2.
Snap SLIP SLEEVES (G) around
the grooves on BOTTOM POLES
( A) for your lowest she lf. Fit
SHELF (D) over the top of the 4
poles and over SLIP SLEEVES
(G).
TIP! Count the numbe r of
groove s from the bottom of the
pole to keep the height of e ach
shelf consistent and even.