Seville Classics UltraHD 16238 User manual

SC200716
ASSEMBLY INSTRUCTIONS
UltraHD® Mega Storage Cabinet (Model No. 16238, 20148, 20158)
48 in. W X 24 in. D X 72 in. H
(1.21 m x 60.9 cm x 1.83 m)
Granite Graphite Red
Reference page 12 for special care
and maintenance of stainless steel

#55-A
#5
#5
#5
#4
#6
1

(#1-A) Left Side Panel
(#2-A) Right Side Panel
(#6-A) Left Door
(#7-A) Right Door
2

PARTS LIST
Please check the parts carefully according to the parts list. If you are missing any parts, please contact our
service department. (Please refer to page 13)
(#1-A3) Side Panel Reinforcement Connection Part x 2 PCS
(#2-A1) Right Side - Upper Panel x 1 PC
(#1-A1) Left Side - Upper Panel x 1 PC
(#1-A2) Left Side - Bottom Panel x 1 PC
(#4) Bottom Panel x 1 PC
(#5) Middle Shelf x 3 PCS
(#3) Top Panel x 1 PC
(#2-A2) Right Side - Bottom Panel x 1 PC
3

(#9) Middle Back Panel x 2 PCS
PARTS LIST
Please check the parts carefully according to the parts list. If you are missing any parts, please contact our
service department. (Please refer to page 13)
(#7-A1) Right Door - Upper Panel x 1 PC
(#8) Upper Back Panel x 1 PC
(#6-A1) Left Door - Upper Panel x 1 PC
(#6-A2) Left Door - Bottom Panel x 1PC
(#7-A3) Key Rod x 1 PC
(#6-A3) Door Panel Connection Part x 2 PCS
(#7-A2) Right Door - Bottom Panel x 1 PC
4

PARTS LIST
Please check the parts carefully according to the parts list. If you are missing any parts, please contact our
service department. (Please refer to page 13)
(#15) Corner Protection - A x 2 PCS
(#17) Middle Corner Protection x 2 PCS
(#21) Screw Driver x 1 PC
(#10) Bottom Back Panel x 1 PC
(#6) Leveling Feet x 4 PCS
(#16) Corner Protection - B x 2 PCS
(#22) Key x 2 PCS
(#23) Magnet x 4 PCS
5

(#54) Screw N (M4 x 10L) x 28 PCS
(#55) Screw M (M6 x 50L) x 2 PCS
PARTS LIST
Please check the parts carefully according to the parts list. If you are missing any parts, please contact our
service department. (Please refer to page 13)
(#25) Wrench x 1 PC
(#34) Hook x 12 PCS
(#53) Screw L (M4 x 6L) x 1 PC
(#52) Screw K (M5 x 10L) x 8 PCS
(#42) Screw G (M4 x 30L) x 16 PCS
(#41) Screw F (M4 x 8L) x 111 PCS
6

(#60) Mounting Strap x 2 PCS
(#27-B) WASHER (M8)x 2 PCS
(#61) Screw O (M4 x 12L) x 2 PCS
(#55-A) Wall Anchor x 2 PCS
(#27) WASHER (M4) x 2 PCS
PARTS LIST
Please check the parts carefully according to the parts list. If you are missing any parts, please contact our
service department. (Please refer to page 13)
M8X20 pcs
7

TIP:
WARNING:
Step 1: Install (#1-A) Left Side Panel.
Note:
Step 2: Install (#2-A) Right Side Panel.
Step 3: Install (#6-A) Left Door.
Note:
UltraHD® Mega Storage Cabinet (Model No. 16238, 20148, 20158)
*NOTE: We recommend using TWO people to assemble the cabinet.
Place the (#1-A1) Left Side - Upper Panel and (#1-A2)
Left Side - Bottom Panel together, place the (#1-A3)
Side Panel Reinforcement Connection Part over the
touching edges, line up screw holes, use 4 pcs of
(#42) Screw G to tighten from the side, then use
6 pcs of (#41) Screw F to tighten from the top side.
Some parts may have sharp edges. To avoid injury,
wearing gloves is recommended during assembly.
Repeat Step 1, use (#2-A1) Right Side Upper Panel,
(#2-A2) Right Side Bottom Panel, (#1-A3) Side Panel
Reinforcement Connection Part, 4 pcs (#42) Screw
G and 6 pcs (#41) Screw F to install (#2-A) Right
Side Panel.
Make sure the (#6-A1) Left Door - Upper Panel is
flushed with (#6-A2) Left Door - Bottom Panel.
1). Place (#6-A1) Left Door - Upper Panel and (#6-A2)
Left Door - Bottom Panel together. Line up screw
holes, use 1 pc (#41) Screw F to tighten from the side.
2). Place the (#6-A3) Door Panel Connection Part over
the touching sides, line up the screw holes, use 4 pcs
(#41) Screw F to tighten from the top, and use 4 pcs
(#52) Screw K to tighten from outside edge.
A magnetic screwdriver is included for your
convenience. If using a power screwdriver,
keep toruqe setting on LOW during assembly.
Make sure the (#1-A1) Left Side Upper Panel is flush
with (#1-A2) Left Side Bottom Panel.
8

Step 4: Install (#7-A) Right Door.
Note:
Step 5: Install (#7-A3) Key Rod.
Step 6: Install (#3) Top Panel to (#1-A1) Left Side Upper
Note:
Step 7: Install (#4) Bottom Panel to (#1-A2) Left Side Bottom
Panel and (#2-A2) Right Side Bottom Panel.
Note:
Attach (#4) Bottom Panel to (#1-A2) Left Side Bottom
Panel and (#2-A2) Right Side Bottom Panel, line up
screw holes, use 8 pcs (#42) Screw G to tighten.
Before tightening screws, make sure the bottom
corners of (#1-A2, #2-A2) Left Side Bottom Panel and
Right Side Bottom Panels are completely flush with
the back and front corners of (#4) Bottom Panel.
UltraHD® Mega Storage Cabinet (Model No. 16238, 20148, 20158)
*NOTE: We recommend using TWO people to assemble the cabinet.
back and front corners of (#3) Top Panel.
Panel and (#2-A1) Right Side Upper Panel.
Attach (#3) Top Panel to (#1-A1) Left Side Upper Panel
and (#2-A1) Right Side Upper Panel. Make sure the
front of the panel faces downward. Line up screw holes,
use 8 pcs (#41) Screw F to tighten.
Before tightening screws, make sure the bottom
corners of (#1-A1, #2-A1) Left Side Upper Panel and
Right Side Upper Panels are completely flush with the
Repeat Step 3, use (#7-A1) Right Door - Upper Panel,
(#7-A2) Right Door - Bottom Panel, (#6-A3) Door Panel
Connection Part, use 1 pc (#41) Screw F to tighten the
touching sides, use 4 pcs (#41) Screw F to tighten
from the top touching side, and 4 pcs (#52) Screw K to
tighten from outside edge.
Make sure the (#7-A1) Right Door - Upper Panel is
flushed with (#7-A2) Right Door - Bottom Panel.
Attach and insert (#7-A3) Key Rod into the bottom tab
hole of (#7-A2) Right Door - Bottom Panel, twist out the
Pre-assembled (#53) Screw L on the key rod linkage
plate, attach (#7-A3) Key Rod by lining up the screw
hole and tightening back in the (#53) Screw L.
9

Step 8: Install (#8, #9 and #10) Back Panels.
Step 9: Install (#6) Leveling Feet.
Note:
Step 10: Install (#15, #16 and #17) Corner Protections.
1). Attach (#15, #16) Corner Protection A, B onto
Top and Bottom of the cabinet, use 20 pcs (#54)
Screw N to tighten.
2). Attach (#17) Middle Corner Protection to the
middle of (#1-A) Left Side Panel and (#2-A) Right
Side Panel, use 8 pcs (#54) Screw N to tighten.
www.SevilleClassics.com. (Model #: WEB128)
See page 13 for installation instructions
UltraHD® Mega Storage Cabinet (Model No. 16238, 20148, 20158)
*NOTE: We recommend using TWO people to assemble the cabinet.
1). Attach (#10) Bottom Back Panel onto both
Bottom of Left and Right Side Panels (#1-A2 and #2-
A2) and Bottom Panel (#4), line up screw holes, use
15 pcs (#41) Screw F to tighten.
2). Attach both (#9) Middle Back Panel above (#10)
Bottom Back Panel the same way. Place the groove
of the (#9) Middle Back Panel onto the top edge of
the (#10) Bottom Back Panel, use 18 pcs (#41)
Screw F to tighten.
3). Use 18 pcs (#41) Screw F to install (#8) Upper
Back Panel the same way.
Attach (#6) Leveling Feet to the four cornersof
(#4) Bottom Panel, use (#25) Wrench to tighten.
Wheels are not included with this unit, however
there are 4 screw holes built into (#4) Bottom Panel
for installation. Wheels can be purchased at
10
Rotate/Stand Storage Cabinet upright after this step.

Step 11: Install (#23) Magnet.
Step 12: Install (#6-A, #7-A) Left and Right Doors.
Note:
Step 13: Install (#5) Middle Shelves.
NOTE: 150 lbs. maximum loading for each shelf.
1). Decide the height for the each Middle Shelf (#5).
Place 1 pc of (#34) Hook into the hook slot where each
corner of shelf should be placed. Make sure the hooks
supporting each shelf are at same height.
Note: All (#5) Middle Shelves need a hook at each
corner to support it.
2). Place each (#5) Middle Shelf into cabinet and push
down onto (#34) Hooks.
Purchase additional shelves (Model #: UHD16238S) on
SevilleClassics.com.
UltraHD® Mega Storage Cabinet (Model No. 16238, 20148, 20158)
*NOTE: We recommend using TWO people to assemble the cabinet.
Place (#23) Magnet onto (#3) Top Panel and (#4)
Bottom Panel facing the front, use 8 pcs (#41)
Screw F to tighten.
1). Attach (#6-A) Left Door to (#1-A) Left Side Panel,
use 11 pcs (#41) Screw F to tighten.
Note: The screw holes on the door hinge have
tolerance, allowing the door to be adjusted and
centered in the door frame. Place top, middle and
bottom Screws first. Don't tighten screws completely
—this may save time by making it easier to level door
panels later.
2). Install (#7-A) Right Door the same way.
The leveling feet may need to be adjusted after this
step to help align door panels in the door frame.
11

Step 14: Install Mounting Strap (#60)
UltraHD® Stainless Steel Care Instructions
• Lightly wipe with warm water and clean microfiber cloth
• Always wipe in the direction of the surface grain (NEVER ACROSS)
• Wipe away excess water with dry clean cloth
The stainless steel is protected with UltraGuard® fingerprint resistant finish.
DO NOT use traditional stainless-steel cleaners. To safely manage unwanted fingerprints
and prevent new stains, perform the following steps once monthly:
UltraHD® Mega Storage Cabinet (Model No. 16238, 20148, 20158)
*NOTE: We recommend using TWO people to assemble the cabinet.
A. Remove 1 pc Screw F (#41) from the back corner
protection.
B. Attach the Mounting Strap (#60) to the back
Corner Protection brackets as the left photo shows
using Screw O (#61) and Washer (#27).
C. Drill a hole in the wall with a 5/16" drill bit, insert
the Wall Anchor (#55-A) into the hole.
D. Attach the other end of the Mounting Strap (#60)
to the wall using Screw M (#55) and Washer (#27-B).
Repeat steps A through D to install the other
mounting strap.
12

UltraHD® Mega Storage Cabinet (Model No. 16238, 20148, 20158)
*NOTE: We recommend using TWO people to assemble the cabinet.
UltraHD® Mega Storage Cabinet (Model No. 16238, 20148, 20158)
*NOTE: We recommend using TWO people to assemble the cabinet.
13
WEB128
Installing Wheels (WEB128)* and Additional Shelves (UHD16238S)**
*Sold separately on SevilleClassics.com. Requires 2 pairs.
*Sold separately on SevilleClassics.com.
Installing Wheels
Step 1: Follow the previous instructions to Step 9.
DO NOT install Leveling Feet (#6).
Step 2: Install 2 pairs of wheels (WEB128) to the
bottom of the cabinet. Use screws included with
wheels to fasten.
Installing Additional Shelves
Step 1: Follow the previous instructions to Step 13.
Install additional shelves (UHD16238S)
the same way.

Seville Classics, Inc.
19401 Harborgate Way Torrance, CA 90501 USA
Telephone: [phone] within USA
Fax: [phone]
Hours: 9:00am - 4:30pm (Pacific Standard Time)
E-mail: [email protected]
Website & Online Store: www.sevilleclassics.com
UltraHD® Tall Storage Cabinet UltraHD® Mega Storage Cabinet
Model No. 16236 (Granite) Model No. 16238 (Granite)
Model No. 20143 (Graphite)
Model No. 20148 (Graphite)
Model No. 20153 (Red) Model No. 20158 (Red)
Model No. 20133 (White)
CONTACT INFORMATION
If you are missing any parts, have any questions, or need additional assistance in assembly, please contact our
bilingual (English and Spanish) customer service department at:
***Please visit our website or call and inquire about our additional UltraHD Line***
UltraHD® Line
14

UltraHD® 4-Drawer Rolling Cabinet UltraHD® 6-Foot Height Adjustable Workbench
Model No. 20205 (Granite)
Model No. 20292 (Granite)
UltraHD® Wall Cabinet with Open Shelf UltraHD® 2-Door Rolling Workbench
Model No. 20230 (Granite) Model No. 20262 (Granite)
Model No. 20140 (Graphite) Model No. 20142 (Graphite)
Model No. 20150 (Red) Model No. 20152 (Red)
UltraHD® Rolling Trash Bin UltraHD® Lighted Workcenter
Model No. 20215
Model No. 20247 (Granite)
Model No. 20246 (Graphite)
Model No. 20157 (Red)
UltraHD® Line