Seville Classics NSF SHE18308B User manual

Customer Service Informaon
Telephone: [phone]
Fax: [phone]
Hours: 8:30 AM – 4:30 PM (PST)
Email: Suppor[email protected]
Homepage: www.SevilleClassics.com
062019
FAQs
Q. Where can I buy wheels?
A. Visit www.sevilleclassics.com and search for stainless steel worktable wheels.
(Model No. SHE18308WH)
Q. Where can I get extra shelves?
A. Visit ww.sevilleclassics.com and search for stainless steel worktable extra shelf.
(Model No. SHE18308SH)
Q. Can it hold a countertop dishwasher?
A. Sure! Table top holds up to 500 lbs. per shelf and up to 1000 lbs. evenly distributed
across the shelves and top. Its's perfect for appliances.
Q. Can I use it in a restaurant?
A. Yes, our stainless-steel worktable is cered by the NSF to NSF/ANSI Standard 2 -
Food Equipment for use in dry environments.
Safety
Do not p the table over or place upside down.
Do not place more than 1000 lbs. on the table top.
Specicaons
Dimensions: 49" W x 24" D x 35.5" H
Weight Capacity: 1000 lbs. evenly distributed
Weight: 55 lbs.
Model: SHE18308B
Thank you for choosing Seville Classics! We hope that you enjoy your new
stainless-steel table. Please read through this user guide for parts list, assembly
instrucons, frequently asked quesons and contact informaon.
062019
Commercial-Grade NSF
Stainless-Steel Top Work Table

Parts List
A. Top (1)
Please make sure you have all the parts on this list.
If you’re missing parts, contact us for replacements at
[phone] or send an email to [e-mail]
1
B. Shelf (1)
C. Slip sleeves (16 )
D. Poles (4)
E. Feet (4)
2
Assembly Instrucons
STEP 1.
Fit caps over the booms of
LEVELING FEET (E), and
screw into the base of
POLES (D).
STEP. 2
Clip SLIP SLEEVES (C)
around boom grooves.
IMPORTANT: Count up
from boom grooves to
make sure all slip sleeves
are at the same height.
Fit SHELF (B) over slip
sleeves and press down
rmly.
STEP 3.
Clip SLIP SLEEVES (C)
around top grooves on
each pole.
Fit TOP (A) over slip sleeves
and press down rmly.
CONGRATULATIONS!
Enjoy your new stainless-
steel worktable!