Seville Classics airLIFT WEB599 User manual

Thank you for choosing Seville Classics! We hope that you enjoy your new sit-to-stand
desk. Please read through this user guide for parts list, instrucons, frequently asked
quesons and contact informaon.
Model #: WEB599
AIRLIFT® 30" Gas-Spring
Standing Desk Converter
122018122018
Customer Service Informaon
Telephone: [phone]
Fax: [phone]
Hours: 8:30 AM – 4:30 PM (PST)
Email: [email protected]
Homepage: www.SevilleClassics.com

Parts List
A. AIRLIFT® Desk (1)
C. Tray (1)
D. Screws (6)
B. Brackets (2)
Please make sure you have all the parts on this list.
If you’re missing parts, contact us for replacements at [phone] or send an email to
[email protected]
Required Tools (not included)
Screwdriver Scissors
16
E. Zip-es (2)
Tie together loose cables with included ZIP TIES (E).
ALWAYS route your cables through the REAR of the desk.
NEVER route cables through the legs of the desk.
Cable Management

Assembly Instrucons
STEP 1. Remove AIRLIFT® DESK (A) from box and set on at table.
STEP 2.
Cut the plasc es on
both sides of the
AIRLIFT® DESK (A).
Safety
DO NOT place devices on desk edge.
DO NOT quickly li desktop when loaded.
DO NOT route wires through desk legs.
MAKE SURE devices have cables long enough for
the full-range (15 in/38 cm) of height-adjustment.
Requires 2
people to li
Failure to follow these instrucons may result in property damage or
personal injury.
2
5

STEP 3. Flip TRAY (C) upside down. Aach BRACKETS (B) with SCREWS (D) and screwdriver.
STEP 4. Pull up on AIRLIFT® lever and desk top to li.
STEP 5. Hook BRACKETS (B) over the screws beneath top of the AIRLIFT® DESK (A).
STEP 6. Place your belongings on the desktop to nish!
WARNING: DO NOT PLACE HANDS ON
DESK LEGS. MOVING PARTS CAN CRUSH.
34
Hand ghten screws counter-clockwise to secure BRACKETS (B).