Seville Classics airLIFT OFF65954B User manual

1
airLIFT® Electric Height Adjustable Standing Desk
Model No.: OFF65954B
Thank you for choosing Seville Classics! We hope that you enjoy your new sit-to-stand
desk. Please read through this user guide for parts list, instructions, frequently asked
questions and contact information.
052021

1
Welcome!
We at Seville Classics® are thrilled that you’ve chosen to go
airLIFT®! Our desks are some of the easiest to use, most versatile
and sophisticated electronic desks on the market. With this, you
can stay active throughout the day without sacricing productivity.
Choosing a height-adjustable desk is not just a convenient
upgrade—it’s a healthy one! Too much sedentary behavior can
present a real health risk, even for people who are already
healthy. Simply getting up throughout the day and moving is a
great way to ght the consequences of too much sitting.
airLIFT® is here to help.
Please read through this manual for more information regarding
your airLIFT® Electric Height Adjustable Standing Desk.
Thank you for choosing Seville Classics®! We hope you will enjoy
this desk for many years to come.

2
Table of Contents
3
4
5
5
6
6
7
7
8
8
9
10
11
12
13
14
15
SAFETY INSTRUCTIONS………………………………………………………………
QUICK SETUP…………………………………………………………………………….
PARTS LIST………………………………………………………………………………...
TOOLS & HARDWARE LIST…………………………………………………………
ASSEMBLY INSTRUCTIONS………………………………………………………...
Attach Legs to Brackets..…………………………………………………...
Attach Legs to Top……………………………………………………………..
Attach Controller.………..…………………………………………………….
Connect Cables………………………………………………………………….
Installing Feet…………………………………………………………………….
Final Steps………………………………………………………………………….
Turn Desk Over………………………………………………………………….
INITIALIZATION & USE INSTRUCTIONS……………………………………...
TROUBLESHOOTING………………………………………………………………….
WARRANTY INFORMATION………………………….…………………………….
FCC INFORMATION…………………………………………………………………...
CUSTOMER SERVICE INFORMATION………………………………………….

3
Safety Instructions
FAILURE TO COMPLY WITH OR OBSERVE ALL ASSEMBLY, SAFETY AND
OPERATING INSTRUCTIONS AND WARNINGS REGARDING THE USE OF THIS
PRODUCT MAY RESULT IN SERIOUS BODILY INJURY
Read and understand this manual before attempting to install or
Assure that everyone who uses this product is informed of the contents of this manual. This
is the responsibility of the Purchaser.
Not intended for use by young children or for those persons who require supervision.
Do not open any of the components – legs, control box, or controller. There is a risk of
electric shock.
Assemble desk on a at and level surface.
Before You Begin
Layout all components and hardware. Visually examine and make sure components are free of
damage. If there is visual damage to any component, it must not be installed.
Two people are needed to turn or move the desk and some of it’s components. When moving or
turning the assembled desk, grab the legs, not the desk top.
Make sure to assemble on a soft and non-abrasive surface to avoid scratches.
Check all connections and cables. Make sure control box is connected to a power outlet.
If the control box makes unusual noises or emits an odor, switch power o immediately.
Use & Liability
Safe use of this product is possible only when the operating instructions are read completely
and the instructions contained are strictly observed. Persons who do not have the necessary
experience or knowledge of this product must not use the product. Persons with reduced
physical or mental abilities should not use this product, unless they are under supervision or
they have been thoroughly instructed in the use of the apparatus by a person who is
responsible for the safety of these persons. Children should be closely supervised to ensure that
they do not play with this product.
The desk MUST be INITIALIZED before rst use.
Read the INITIALIZATION chapter prior to operation.

4
Quick Setup!
Only takes 15 minutes to complete. Phillips screwdriver required.
Keep the top in the box during assembly to protect it from scratches.
Legs
Feet
Top Controller Box
Motor

5
A. Top (1)
B. Legs (1)
C. Feet (2)
D. Controller (1)
Parts List
Tools & Hardware List
If you’re missing parts, contact us for replacements at [phone] or
send an email to [email protected]
Please make sure you have all the parts on this list.
Leave the TOP (A) in the box during assembly.
E. M6x12 Screws (4)
F. ST4.8x13 Screws (4)
G. M8x30 Screws (8)
H. 4 mm Hex Key
I. 5 mm Hex key

6
STEP 1.
Lower LEGS (B) onto the back of the TOP (A).
Make sure the motor is on the same side as the control box.
Control Box
Motor
STEP 3.
Align the holes on the legs with the brackets and attach with M6x12 SCREWS (E) using
4 mm HEX KEY (H).

7
STEP 3.
Align holes on crossbar with holes on back of TOP (A).
Attach with two ST4.8x13 SCREWS (F) using Phillips screwdriver.
STEP 4.
Align holes on CONTROLLER (D) with holes on edge of TOP (A).
Attach with two ST4.8x13 SCREWS (F) using Phillips screwdriver.

8
STEP 5.
Connect cables from the motor to the CONTROLLER (D).
Connect cables from motor to control box.
STEP 6.
Attach FEET (C) to the bottom of table legs with four M8x30 BOLTS (F) using
5 mm HEX KEY (I).

9
STEP 7.
Plug the power cable into the control box. Make sure the cables from the controller to
the motor to the control box are securely attached.
Take this time to make sure all screws, bolts, and cables
have been secured tightly.
Power cable

10
WARNING: TWO PEOPLE ARE NECESSARY TO TURN TABLE.
DESK IS HEAVY. LIFT WITH EXTREME CAUTION.
STEP 6. Turn the desk onto its feet.
TIP: Screw the leveling feet in and
out as necessary to ensure the desk
stands level.
DO NOT put weight on desk yet.
Lift with 2 people

11
Use Instructions
DESK MUST BE INITIALIZED BEFORE FIRST USE
Initialize & Reset
Press and hold the Down Arrow until the desk reaches its lowest point.
Initialization is complete when the desk emits a chime sound and rebounds.
When RST appears on the display, follow the above instructions to reset.
Adjust Height
Press and hold the Up Arrow to lift.
Press and hold the Down Arrow to lower.
Save Height
Press and hold the desired memory button for 5 seconds until chime is heard.
Recall Height
Press the desired memory button. The desk will then adjust to the stored height.
Limit Height
Press the Up Arrow + Down Arrow for 5 seconds until chime is heard.
Desk height will be limited to current height (maximum height limit: 37.8 in.)
Cancel by pressing Up Arrow + Down Arrow for 5 seconds until buzzer is heard.
Lock Controller
Press the Up Arrow + M4 for 5 seconds to lock the controller. (Display will show LOC.)
Press the Down Arrow + M4 for 5 seconds to unlock the controller.
Up Arrow Down Arrow Memory Display

12
Troubleshooting
Error Codes
Problem Acon
Desk does not go up or down and the
controller does not illuminate when any
button is pressed.
Check all connections. Make sure power cord is plugged into the control box
and a power outlet. Press any button on the
controller and make sure it illuminates. Reset the desk.
Desk does not go up or down and the
controller illuminates when any
button is pressed.
Unplug the power cord and re-plug after 10 seconds.
Reset the desk. If the problem persists, switch motor cables from one port to
another at control box and reset again.
Desk wobbles excessively. It is normal that desk moves slightly at standing height when in use. Retighten
all screws and bolts, and adjust leveling feet to make sure table stands level.
Desk legs are noisy. It is normal that desk makes noise when the stages move past each other.
Apply silicon-based lubricant if it is unusually noisy.
Error Code Problem Acon
E01, E06,
E07 Power fault Unplug and re-plug the power cord. Reinitialize the desk.
E04 Handset fault Unplug and re-plug the controller cables. Reinitialize the desk.
E05 Anti-collision Make sure nothing obstructing the desk from adjusting.
E08 Desktop sloping Make sure the desk is attached to the legs correctly.
Reinitialize the desk.
E11, E21,
E40, E41 Connection cable failure Un-plug and re-plug the controller, motor, and power cables.
Reinitialize the desk.
E12, E22,
E42, E43 Controller fault Unplug and re-plug the controller cables. Reinitialize the desk.
E14 to E17
E24 to E27 Motor fault Unplug and re-plug the motor cables, and power cord.
Reinitialize the desk.
E18, E28 Overloading Remove some weight from the desk top.
HOT HOT is displayed on the panel. The desk motors are overheated. Stop using the desk for 20
minutes and let them cool down.
Please contact customer service for additional support.
Phone: [phone] | Email: [email protected]

13
Warranty Information
7-Year Non-Electronic Component Warranty
Seville Classics, Inc. warrants to the original retail purchaser that if this product proves to be defective in
material or workmanship, we will replace the aected non-electronic part(s) for a period of seven
years on Seville Classics airLIFT® Electric Height-Adjustable Standing Desks from the date of
original purchase.
2-Year Electronic Component Warranty
Seville Classics, Inc. warrants to the original retail purchaser that if this product proves to be defective in
material or workmanship we will replace the aected electronic part(s) for a period of two years on
Seville Classics airLIFT® Electric Height Adjustable Standing Desks from the date of original purchase.
Except for the express warranty set forth above and except to the extent prohibited by applicable law,
Seville Classics grants no other express or implied warranties with respect to the product, its tness for
any purpose, its quality, or its merchantability. The liability of Seville Classics under the warranty shall be
limited to the amount paid by the customer for the product. Seville Classics shall not be liable for any
loss of use of the product, or other incidental or consequential costs, expenses or damages incurred by
the customer or other user.
This warranty covers only the airLIFT® Electric Height Adjustable Standing Desks sold in the United States
of America and Canada. Some states do not allow the exclusion or limitations of implied warranties or
consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives
you specic legal rights, and you may also have other rights that vary from state to state.
During the applicable warranty period, Seville Classics, at its option, will either refund the original pur-
chase price or replace the aected part(s) with comparable part(s) when the aected part(s) are
returned, postage prepaid, to the address below:
Seville Classics Inc.
19401 South Harborgate Way
Torrance, CA 90501 – 1322 U.S.A.
To obtain service under this warranty, you must:
1. Register your product at www.SevilleClassics.com/warranty
2. Contact our customer service at [phone] or email [e-mail];
3. Return the aected part(s) postage prepaid to Seville Classics pursuant to our customer service
representative; and
4. Include in the package:
A. A copy of the original bill of sale, your charge or credit receipt, or other satisfactory proof of
the date of the original purchase date of the product, and the price paid; and
B. A short detailed description of the problem, the name and phone number of the contact
person.

14
NOTE: This equipment has been tested and found to comply with the limits for Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio or television reception, which can be determined by turning the equipment o and
on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
• Consult the dealer or an experienced Radio/TV technician for help

15
052021
Customer Service Information
Telephone: [phone]
Fax: [phone]
Hours: 8:30 AM – 4:30 PM (PST)
Email: [email protected]
Homepage: www.SevilleClassics.com