Seville Classics WEB395 User manual



Step 5: Assembly is complete.

Loading Capacity (each rail): 66 lbs. / 29.9 kg
Loading Capacity (on shelf): 13 lbs. / 5.9 kg
Customer Service
Tel [phone]
Fax [phone]
Monday through Friday 9:00 am - 5:00 pm (Pacific Time)
Seville Classics, Inc.
Torrance, CA 90501 USA
www.sevilleclassics.com
©2016 Seville Classics, Inc.
 TF161114
DOUBLE RAIL GARMENT RACK
Model No. WEB395
ASSEMBLY INSTRUCTIONS
INSERT PICTURE HERE

















Pleasemakesureyouhaveallthepartsbeforeassembly.
A2pcsB4pcsC2pcsD2pcs
HangingRailUpperSide
Support
LowerSide
SupportBottomTube








E2pcsF4pcsG1pcsH4pcs
LegTubeSteelClipNetEndCap










I4pcsJ4pcsK4pcsL4pcs
Castor
(2withbreak,
2withoutbreak)
Lock30mmScrew70mmScrew









M1pcs
AllenKey



Step 1: Fitting the base
Using Screw (L) to connect Steel clip (F),
Leg tube (E),Bottom tube (D) and
Lower side support (C);
then tighten by Allen key (M).
Step 2: Fitting the leg section
Put End cap (H) into Leg tube (E), and insert
Castor (I) into Leg tube (E).
Step 3: Fitting the hanging rail and upper
side support
Using Screw(K) to connect Hanging rail (A)
with Upper side support (B);
then tighten by Allen key (M).
Step 4: Finishing the product
Install Lock (J) onto Lower side
support (C). Insert upper side support (B)
into Lower side support (C) by passing
through the Lock (J).
Put Net (G) on Bottom tube (D).