Seville Classics UltraHD Series User manual

TR170811
ASSEMBLY INSTRUCTIONS
UltraHD 4-Door Locker Cabinet (Model No. 20294)
15 in. W X 18 in. D X 72 in. H
(38.1 cm x 45.7 cm x 1.83 m)
Reference page 11 for special care
and maintenance of stainless steel

(pg 1 of 12)

(pg 2 of 12)
(#1-A) Left Panel
(#2-A) Right Panel

PARTS LIST (pg 3 of 12)
Please check the parts carefully according to the parts list. If you are missing any parts, please contact our customer
service department. (please refer to page 12 of 12) .
(#1-A1) Left Side - Upper Panel x 1 PC
(#2-A1) Right Side - Upper Panel x 1 PC
(#3) Top Panel x 1 PC
(#4) Bottom Panel x 1 PC
(#5) Middle Shelf x 2 PCS
(#7) Middle Layer Panel x 1 PC
(#2-A2) Right Side - Bottom Panel x 1 PC
(#1-A2) Left Side - Bottom Panel x 1 PC

(#16) Corner Protection - B x 2 PCS
PARTS LIST (pg 4 of 12)
Please check the parts carefully according to the parts list. If you are missing any parts, please contact our customer
service department. (please refer to page 12 of 12) .
(#11) Lock Plate x 4 PCS
(#15) Corner Protection - A x 2 PCS
(#8) Upper Back Panel x 1 PC
(#10) Bottom Back Panel x 1 PC
(#13) Middle Shelf Bracket x 4 PCS
(#2) Door Panel x 4 PCS
(#12) Middle Panel Bracket x 2 PCS

PARTS LIST (pg 5 of 12)
Please check the parts carefully according to the parts list. If you are missing any parts, please contact our customer
service department. (please refer to page 12 of 12) .
(#25) Wrench x 1 PC
(#22) Key x 8 PCS
(#23) Magnet x 8 PCS
(#17) Middle Corner Protection x 2 PCS
(#6) Leveling Feet x 4 PCS
(#21) Screw Driver x 1 PC
(#41) Screw F (M4 x 8L) x 91 PCS
(#54) Screw N (M4 x 10L) x 28 PCS

(#60) Mounting Strap x 2 PCS
(#62) Name Card x 4 PCS
PARTS LIST (pg 6 of 12)
Please check the parts carefully according to the parts list. If you are missing any parts, please contact our customer
service department. (please refer to page 12 of 12) .
(#42) Screw G (M4 x 30L) x 12 PCS
(#61) Screw O (M4 x 12L) x 2 PCS
(#55-A) Wall Anchor x 2 PCS
(#55) Screw M (M6 x 50L) x 2 PCS
(#27) WASHER (M4) x 2 PCS
(#27-B) WASHER (M8)x 2 PCS
M8X20 pcs

TIP:
WARNING:
Step 1: Install Left Side Panel (#1-A)
Note:
Step 2: Install Right Side Panel (#2-A)
Note:
Step 3: Install Top Panel (#3) to Left Side Panel (#1-A)
and Right Side Panel (#2-A)
Note:
ASSEMBLY INSTRUCTIONS (pg 7 of 12)
UltraHD 4-Door Locker Cabinet (Model No. 20294)
Some parts may have sharp edges. To avoid injury,
wearing gloves is recommended during assembly.
A magnetic screwdriver is included for your
convenience. If a power screwdriver is used, keep
on a low torque setting.
Place the Left Side Upper Panel (#1-A1) and Left Side
Bottom Panel (#1-A2) together, line up screw holes,
use 3pcs of Screw G (#42) to tighten from the side.
Repeat Step 1, place Right Side Upper Panel (#2-A1),
Right Side Bottom Panel (#2-A2) together, line up
screw holes, use 3pcs of Screw G (#42) to tighten from
the side.
Before tightening screws, make sure the corners of
the Top Panel (#3) are completely flush.
Before tightening screws, make sure the corners and
the face of the Left Side Panel (#1-A) are completely
flush.
Before tightening screws, make sure the corners and
the face of the Right Side Panel (#2-A) are completely
flush.
Attach Top Panel (#3) to Left Side Panel (#1-A) and
Right Side Panel (#2-A). Make sure the front of the unit
faces downward. Line up screw holes, use 6pcs Screw F
(#41) to tighten.
BOTTOM
FRONT
BACK
TOP

Step 4: Install Bottom Panel (#4) to Left Side Panel (#1-A)
and Right Side Panel (#2-A)
Note:
Step 5: Install Middle Layer Panel (#7)
Step 6:
1). Attach Bottom Back Panel (#10) onto both Bottom
of Left and Right Side Panels (#1-A2 and #2-A2) and
Bottom Panel (#4).
2) Attach the Upper Back Panel (#8) above the Bottom
Back Panel (#10) the same way. Place the groove of the
Upper Back Panel (#8) onto the top edge of the Bottom
Back Panel (#10).
3) Line up all the screw holes, use 27 pcs (#41) Screw F
to tighten the Back Panels.
Install Upper and Bottom Back Panels (#8, and #10)
ASSEMBLY INSTRUCTIONS (pg 8 of 12)
UltraHD 4-Door Locker Cabinet (Model No. 20294)
Attach Bottom Panel (#4) to Left Side Panel (#1-A) and
Right Side Panel (#2-A). Make sure the front of the unit
faces downward. Line up screw holes, use 6pcs Screw G
(#42) to tighten.
Before tightening screws, make sure the corners of the
Bottom Panel (#4) are completely flush.
1. Attached the Middle Layer Panel (#7) as the left
picture shows. Use 8 pcs of Screw F (#41) to fasten the
Middle Layer Panel to the Left and Right Panels
(#1 and #2).
2. Remove the middle Screw G (#42) which attaches the
upper and bottom side panels on Step 1 & 2. Attach the
Middle Layer Panel Bracket (#12) to the center of the
Middle Layer Panel (#7) and install back Screw G (#42)
and install Screw F (#41).
1.
2.
TOP
FRONT
TOP
TOP
FRONT
FRONT

Step 7:
Step 8: Install Middle Shelf (#5)
Step 9: Install Corner Protections (#15, #16 and #17)
ASSEMBLY INSTRUCTIONS (pg 9 of 12)
UltraHD 4-Door Locker Cabinet (Model No. 20294)
Install Leveling Feet (#6).
Install Leveling Feet (#6) into the largest corner
holes of the Bottom Panel (#4), use Wrench (#25)
to tighten.
1). Attach Corner Protection A, B (#15, #16) onto
Top of the cabinet, use 10pcs (#54) Screw N to
tighten.
2). Attach (#17-1) Middle Corner Protection to the
middle of (#1-A) Left Side Panel and (#2-A) Right
Side Panel, use 8pcs (#54) Screw N to tighten.
Insert a Middle Shelf (#5) into the slots on the Side
Panels. Use 6 pcs Screw F (#41) to fasten the
Middle Shelf Bracket (#13) to the front of the side
panels.
Repeat Step 8 to assemble another Middle Shelf.
TOP
BACK
TOP
Front

Step 10:
Step 11: Install Magnet (#23)
Step 12: Install Door (#2)
NOTE:
The screw holes on the door hinge have tolerance,
enabling the door to be adjusted and centered in
the door frame. Place top, middle and bottom
screws first. Don't tighten screws completely - this
may save time by avoiding having to make slight
adjustments for leveling door panels later.
ASSEMBLY INSTRUCTIONS (pg 10 of 12)
UltraHD 4-Door Locker Cabinet (Model No. 20294)
Install Lock Plate (#11)
Attach the Lock Plate (#11) on the Left Panel
(1-A), use 8 pcs Screw F (#41) to tighten.
Place Magnet (#23) onto the top and bottom of
each panel, the black plate should be facing the
front, use total 16pcs Screw F (#41) to tighten the
magnets.
1). Attach Door (#2) to Right Side Panel (#2-A), use
3 pcs Screw F (#41) to tighten.
Repeat this step to assemble the rest of the doors.

Step 13:
UltraHD 4-Door Locker Cabinet (Model No. 20294)
Stainless Steel Maintenance:
These parts have an UltraGuard® fingerprint resistant finish. Do not use traditional stainless steel cleaners on this unit. Lightly
wipe off once a month with clean warm water and a soft cloth (preferably a microfiber cloth). This is the safest formula to
prevent new stains from appearing over time and manage unwanted fingerprints or grease marks. Remember to always wipe in
the direction of the surface grain (NEVER ACROSS) and always use a lint-free cloth. Once the surface is clean,thoroughly wipe dry
with a soft absorbent cloth.
ASSEMBLY INSTRUCTIONS (pg 11 of 12)
Install Mounting Strap (#60)
A. Remove 1 pc Screw F (#41) from the back corner
protection.
B. Attach the Mounting Strap (#60) to the back
Corner Protection brackets as the left photo shows
using Screw O (#61) and Washer (#27).
C. Drill a hole in the wall with a 5/16" drill bit, insert
the Wall Anchor (#55-A) into the hole.
D. Attach the other end of the Mounting Strap (#60)
to the wall using Screw M (#55) and Washer (#27-B).
Repeat steps A through D to install the other
mounting strap.
Warning: To prevent possible tipping, it is suggested that the
Mounting Straps be installed. For safety, secure the mounting
straps to wood studs whenever possible.

***Please visit our website or call and inquire about our additional UltraHD Line***
Website & Online Store: www.sevilleclassics.com
CONTACT INFORMATION (pg 12 of 12)
*If you are missing any parts, have any questions, or need additional assistance in assembly, please contact:
Seville Classics, Inc.
19401 South Harborgate Way
Torrance, CA 90501
USA
Telephone: [phone] within USA
Hours: 9:00am - 4:30pm (Pacific Standard Time)
Fax: [phone]
E-mail: [email protected]
UltraHD Line
Model No. 16238
UltraHD Storage Cabinet
Model No. 16236
UltraHD Storage Cabinet
Model No. 20227
UltraHD Rolling Cabinet
Model No. 20238
UltraHD Rolling Cabinet

Model No. 20262
UltraHD Rolling Workbench
Model No. 20283
UltraHD Mobile Work Table
Model No. 20217
UltraHD Trash Bin
Model No. 20255
UltraHD Tool Box
UltraHD Line
Model No. 20206
UltraHD Workbench
Model No. 20230
UltraHD Wall Cabinet