Seville Classics WEB530 User manual

Interlock (optional)
3-Tier Resin Slat Utility Shoe Rack
Espresso
2 units
3 units
Safety
Do not sit on the rack. Do not drop heavy items on the rack. Place heavier items on
the lower shelves and lighter ones on the top shelves. Do not move the rack while
loaded. Do not move the rack by lifting the shelf, use the handles instead.
Specifications
Dimensions: 26.5" W x 12.2" D x 19.1" H
Weight capacity: 30 lbs. (13.6 kgs) per shelf
Weight: 9.85 lbs. (4.47 kgs)
Customer Service Information
Telephone: [phone]
Fax: [phone]
Hours: 8:30 AM – 4:30 PM (PST)
Email: [e-mail]
Homepage: www.SevilleClassics.com
Clip SHELVES (B) between FRAMES (A) to interlock and extend your racks.
This product may be covered by one or more U.S. patents as found on www.sevilleclassics.com/patents
122018 122018
Model: WEB530
Thank you for choosing Seville Classics! We hope that you enjoy your new shoe
utility rack. Please read through this user guide for parts list, assembly instructions,
frequently asked questions and further contact information.

C
D
Parts List
A. Frame (1)
B. Shelf (3)
C. Feet (4)
D. Cap (4)
E. Stacking Pin (4)
Assembly Instructions
STEP 1.
Screw FEET (C) into the legs of
each FRAME (A).
Insert CAPS (D) to top of
FRAME (A) if only building
one unit.
A
B
STEP 2.
Insert bottom SHELF (B) diag-onally
above the bottom bars.
Rotate until SHELF (B) clips
rest on bars of FRAME (A).
Press down firmly to secure.
Repeat for remaining shelves.
Build another rack with
STACKING PINS (E).
Lift the top unit up and onto
the bottom unit. Line up the 4
STACKING PINS (E) with tops
of the existing unit.
Press down firmly.
Stacking Instructions (optional)
E
A
A
A
Please make sure you have all the parts on this list.
If you’re missing parts, contact us for replacements at
[phone] or send an email to [email protected]
21
A
B