Seville Classics WEB488 User manual

Thank you for choosing Seville Classics! We hope that you enjoy your
organizer cart. Please read through this user guide for parts list,
assembly instrucons, frequently asked quesons and contact info.
Model #: WEB488
6-Drawer Mesh Organizer Cart
FAQs
Q. How big is it?
A. Unit measures 12.6" W x 15.35" D x 37" H
Q. Can I use it without the casters?
A. No, the cart is not designed to be used without the casters.
Q. How much weight can it hold?
A. Weight capacity per drawer: 11 lbs. (5 kgs)
Weight capacity on top shelf: 44 lbs. (20 kgs)
Total weight capacity: 110 lbs. (50 kgs)
Customer Service Informaon
Telephone: [phone]
Fax: [phone]
Hours: 8:30 AM – 4:30 PM (PST)
Email: [email protected]
Homepage: www.SevilleClassics.com
STEP 3. Insert Drawers
Slide the DRAWERS (D) into the metal
channels. Make sure the handles face forward.
Clip LABEL HOLDERS (J) to drawers as desired.
Congratulaons!
Enjoy your new organizer cart!
10-2017

Parts List
Please make sure you have all the parts on this list.
If you’re missing parts, contact us for replacements at
[phone] or send an email to [e-mail]
Assembly Instrucons
STEP 1. Connect Side Frames
Make sure channels on each
SIDE FRAME (A) face each other.
Fit a WASHER (H) between SIDE
FRAME (A) and CROSSBAR (B).
Curved side of washer MUST face
side frame. Flat side of washer
MUST face crossbar.
Insert SCREW (G) through outer bolt
holes on a SIDE FRAME (A), WASHER
(H) and into CROSSBAR (B).
Tighten with screwdriver unl snug.
Repeat for remaining screw holes.
A. Side frame (2)
B. Crossbar (4)
C. Shelf (1)
D. Drawer (6)
E. Caster (2)
F. Locking caster (2)
G. Screws (8)
H. Washer (8)
I. Wrench (1)
STEP 2. Install Shelf and Casters
Clip SHELF (C) on to top crossbars.
STEP 3. Screw CASTERS (E,F) into
base of poles with WRENCH (I).
J. Label holder (6)
Required Tools (not included)
Screwdriver