Seville Classics WEB675 User manual

Customer Service Informaon
Telephone: [phone]
Fax: [phone]
Hours: 8:30 AM – 4:30 PM (PST)
Email: [e-mail]
Homepage: www.SevilleClassics.com
Cauon
Place heavier items on the lower shelves and lighter ones on the top.
Do not stand or climb on the shelving system.
Do not drop heavy items on the system.
Do not move the system while loaded.
112018
Specicaons
Dimensions: 30" W x 14" D x 60" H
Weight capacity Per shelf Overall
On leveling feet 300 lbs. (136 kg.)
1500 lbs. (680.4 kg.)
WEB370
Steel Wire Shelf
30" x 14"
WEB106
8-Pack Shelf Label
Addional parts and accessories are available for purchase online at:
www.SevilleClassics.com
WEB046
Shelving Liners
36" x 18" (2-Pack)
WEB232
S-Hook (6-pack)
View assembly online here:
hps://www.youtube.com/watch?v=N6iRVVqBG-I
5-Tier Black Epoxy Wire Shelving
30" W x 14" D x 60" H
Model #: WEB675
Thank you for choosing Seville Classics! We hope that you enjoy your
steel wire shelving! Please read through this guide for parts list, assembly
instrucons, frequently asked quesons and further contact informaon.
112018

Parts List
B. Top poles (4)
(Plasc cap on end)
Please make sure you have all the parts on this list.
If you’re missing parts, contact us for replacements at
[phone] or send an email to [e-mail]
1
D. Shelves (4)
F. Leveling feet (4)
E. Slip sleeves (20)
Assembly Instrucons
STEP 1.
Screw LEVELING FEET (F) into base of
boom poles.
Repeat for all boom poles.
STEP 2.
Snap SLIP SLEEVES (E) around the
grooves on BOTTOM POLES (A) for
your lowest shelf.
TIP! Count the number of grooves
from the boom of the pole to keep
the height consistent.
A. Boom poles (4)
(Threaded end)
C. Connectors (4)
(May be aached to poles)
2
STEP 3.
Fit SHELF (D) over the top of the 4 poles
and over SLIP SLEEVES (E).
Repeat STEPS 2-3 for next shelf.
TIP! If necessary, lightly tap shelves into
place with a rubber mallet.
STEP 4.
Screw CONNECTORS (C) into top of
BOTTOM POLES (A).
Screw TOP POLES (B) to CONNECTORS (C).
TIP! Connectors may be pre-installed.
STEP 5.
Repeat STEPS 2-3 for remaining shelves.
Congratulaons!
Enjoy your now complete
shelving unit.