Seville Classics airLIFT Elite Gaming eSport Computer Desk... User manual

airLIFT Elite Gaming eSport Computer Desk
Model: OFF65924
Thank you for choosing Seville Classics! We hope that you enjoy your computer gaming table! Please read through this
user guide for parts list, assembly instrucons, frequently asked quesons and further contact informaon.
062020

Parts List
Please make sure you have all the parts on this list.
If you’re missing parts, contact us for replacements at
[phone] or send an email to [e-mail]
1
4 mm Hex Key
1. Le Side Frame
2. Right Side Frame
3. Le Support
4. Right Support
5. Wire Tray Boom
6. Wire Tray Back
7. Crossbar
8. Hanger Hook
9. Le Shelf
10. Desk Top
11. Right Shelf
12. Cup Holder
13. Riser Bracket
14. Riser Top
M6x12 Screw (2)
M4x8 Screw (3)
M6x15 Screw (20)
M6x40 Screw (5)
Foot (4)
Clamp Knob (2)
Clamp Pad (2)
M6x45 Screw (2)

Assembly Instrucons
2
STEP 1. Screw FEET (A) into SIDE FRAMES (1, 2). Holes on the inside of frames should face each other.
STEP 2.
Use 4 mm hex key (I) to install all screws.
Connect SIDE FRAMES (1,2) at the top with CROSSBAR (7) using M6x45 SCREWS (D).

3
STEP 3.
Aach LEFT and RIGHT SUPPORTS (3, 4) to the CROSSBAR (3) and SIDE FRAMES (1,2) with M6x15 SCREWS (F).
STEP 4.
Aach DESK TOP (10) to SIDE FRAMES (1, 3) with M6x40 SCREWS (E).

4
STEP 5.
Aach WIRE TRAY BOTTOM (5) to WIRE TRAY BACK (6) with M4x8 SCREWS (H).
STEP 6. Aach WIRE TRAY (5, 6) to the rear of DESK TOP (10) with M6x12 SCREWS (G).

5
STEP 7.
Install HANGER HOOKS (8) to front of desk, and CUP HOLDER (12) to le or right side of desk with
M6x15 SCREWS (F).
STEP 8.
Turn the desk onto is feet. Install LEFT and RIGHT SHLEVES (9, 11) with M6x15 SCREWS (F).

6
FAQS
Q. How thick is the desk top? Can I aach a gaming wheel to it?
A. Of course! The top is .8" thick and a perfect match for force-feedback racing wheels, joyscks, and other accessories.
Q. How big of a monitor can I t on the riser?
A. The only limit is the size of the monitor base. The riser is 22.8" W x 8.7" D.
Q. How do I clean the top?
A. Spray with mild soap and wipe clean with a damp towel. The top is wrapped in pvc for durability and long-term use.
Q. How much weight can I put on the table top?
A. The desk holds up to 133 lbs. evenly distributed.
Q: How must weight can the hooks and shelves hold?
A: The shelves, cup holders, and hook can hold up to 6.6 lbs each. The monitor riser can hold up to 33 lbs.
Q: How big is the cup holder?
A: The cup holder is 4" wide. It's a prefect for boles and large cups.
Specicaons
Overall Dimensions: 47.2" x 25.6" x 29.5" H
Weight capacity: 136 lbs. (evenly distributed)
Weight: 52.8 lbs.
STEP 9. Turn RISER TOP (14) upside down. Install RISER BRACKETS (13) with at sides toward rear of riser
top using M6x15 SCREWS (F).
Screw CLAMP KNOB (B) through the hook on the RISER BRACKETS (13) into CLAMP PAD (C).
Fit the clamps over the rear of the desk, at your desired posion. Twist the clamps knobs unl ght.
Congratulaons! Enjoy your new airLIFT Elite eSport Gaming Desk.

Customer Service Informaon
Telephone: [phone]
Fax: [phone]
Hours: 8:30 AM – 4:30 PM (PST)
Email: [e-mail]
Homepage: www.SevilleClassics.com
062020