Seville Classics SHE15894B User manual

Thank you for choosing Seville Classics! We hope that you enjoy your
new ulity shoe rack. Please read through this user guide for parts
list, assembly instrucons, frequently asked quesons and further
contact informaon.
Model #: SHE15894B
2-Tier Resin Slat Ulity Shoe Rack
Espresso
Customer Service Informaon
FAQs
Q. Does this stack with other Seville Classics shoe racks?
A. No. This model stacks with itself (model #: SHE15894B).
Does not stack with model # SHE15893.
Q. Can I use the rack with only one shelf?
A. No. Both shelves must be installed for the unit to be stable.
Q. How big is it?
A. Dimensions measure 26.2" W x 11.6" D x 15.4" H per unit.
Q. How much weight can I put on it?
A. Store up to 25 lbs. per shelf, evenly distributed.
Safety
Do not sit on the rack. Do not drop heavy items on the rack. Place
heavier items on the lower shelves and lighter ones on the top
shelves. Do not move the rack while loaded. Do not move the rack
by liing the shelf, use the handles instead.
Telephone: [phone]
Fax: [phone]
Hours: 8:30 AM – 4:30 PM (PST)
Email: [email protected]
Homepage: www.SevilleClassics.com
Address: 19401 South Harborgate Way
Torrance, CA 90501 – 1322, USA
This product may be covered by one or more U.S. patents,
as found on www.sevilleclassics.com/patents
07-2017

STEP 1. Turn the SIDE FRAMES (A) upside
down and set them a shelf-length apart.
Make sure support brackets on each frame
face each other.
STEP 2. Insert a SHELF (B) upside down in
the support brackets nearest the ground.
Line up the holes on the support brackets
and SHELF (B) and secure with SCREWS (F).
TIP: Seng SHELF (B) on your lap may
make it easier to align holes and screws.
Tighten SCREWS (F) unl snug.
STEP 3. Repeat with second SHELF (B) and
turn unit over.
4B. Install STACKING PINS (D) to legs
when expanding an exisng unit.
DO NOT
STACK MORE
THAN 3 UNITS
HIGH
Parts List
A. Side Frame (2)
B. Shelf (2)
C. Leveling Feet (4)
D. Stacking Pins (4)
E. Caps (4)
F. Screws (8)
Please make sure you have all the parts on this list.
If you’re missing parts, contact us for replacements at [phone]
or send an email to [email protected]
Assembly Instrucons
4A. Install CAPS (E) and LEVELING
FEET (C) for freestanding use.
Required Tools (not included)
Screwdriver
07-2017