Seville Classics airLIFT OFF65951B User manual

1
airLIFT® Glass & Wood Height Adjustable Standing Desk
Models: OFF65951B
Thank you for choosing Seville Classics! We hope that you enjoy your new sit-to-stand
desk. Please read through this user guide for parts list, instructions, frequently asked
questions and contact information.
V02012022
User Manual
Keep for future reference

1
Get help with assembly and report damaged or missing parts.
Email: [email protected]
Telephone: [phone]
Hours: 8:30 AM - 4:30 PM (PST)
Welcome and Congrats on your new Desk!
We at Seville Classics® are thrilled that you’ve chosen to go
airLIFT®! Our desks are some of the easiest to use, most versatile
and sophisticated electronic desks on the market. With this, you
can stay active throughout the day without sacrificing
productivity.
Choosing a height-adjustable desk is not just a convenient
upgrade—it’s a healthy one! Too much sedentary behavior can
present a real health risk, even for people who are already
healthy. Simply getting up throughout the day and moving is a
great way to fight the consequences of too much sitting. airLIFT®
is here to help.
Please read through this manual for more information
regarding your airLIFT® Electric Height Adjustable Standing Desk.
Thank you for choosing Seville Classics®! We hope you will enjoy
this desk for many years to come.
Post Setup Quick Start Instructions
Once your desk has been put together or when reset (initialization) is necessary:
1). Press & Hold the DOWN ARROW until the desk reaches the lowest position
and/or stops moving.
2). Release your finger from the DOWN ARROW momentarily and then Press & Hold
again until:
(a). Screen is flashing “RSt”.
(b). Desk rebounds.
(c). You will hear a “DING” sound.
3). Release your finger and this completes the initialization/reset procedure.

2
Table of Contents
3
4
5
5
6
SAFETY INSTRUCTIONS………………………………………………………………
QUICK SETUP…………………………………………………………………………….
PARTS LIST………………………………………………………………………………...
TOOLS & HARDWARE LIST………………………………………………………...
ASSEMBLY INSTRUCTIONS………………………………………………………...
Get help with assembly and report damaged or missing parts.
Email: [email protected]
Telephone: [phone]
Hours: 8:30 AM - 4:30 PM (PST)
6
7
8
9
10
Unpack .................……………………………………………………………………………..
Install Brackets ...........................................…………………………………………..
Install Legs ...............................................…………………………………………….
Connect Motor ...........................................………………………………………….
Final Steps ......................…………………………………………………………………..
11
12
13
14
15
INITIALIZATION & USE INSTRUCTIONS………………………………………
TROUBLESHOOTING………………………………………………………………….
WARRANTY INFORMATION………………………….…………………………….
FCC INFORMATION……………………………………………………………………
CUSTOMER SERVICE INFORMATION………………………………………….

3
Safety Instructions
FAILURE TO COMPLY WITH OR OBSERVE ALL ASSEMBLY, SAFETY AND
OPERATING INSTRUCTIONS AND WARNINGS REGARDING THE USE OF THIS
PRODUCT MAY RESULT IN SERIOUS BODILY INJURY
•Read and understand this manual before attempting to install or
•Assure that everyone who uses this product is informed of the contents of this manual. This
is the responsibility of the Purchaser.
•Not intended for use by young children or for those persons who require supervision.
•Do not open any of the components – legs, control box, or LED Control Panel. There is a risk
of electric shock.
•Assemble desk on a flat and level surface.
Before You Begin
Layout all components and hardware. Visually examine and make sure components are free of
damage. If there is visual damage to any component, it must not be installed.
Two people are needed to turn or move the desk and some of it’s components. When moving or
turning the assembled desk, grab the legs, not the desk top.
Make sure to assemble on a soft and non-abrasive surface to avoid scratches.
Check all connections and cables. Make sure control box is connected to a power outlet.
If the control box makes unusual noises or emits an odor, switch power off immediately.
Use & Liability
Safe use of this product is possible only when the operating instructions are read completely
and the instructions contained are strictly observed. Persons who do not have the necessary
experience or knowledge of this product must not use the product. Persons with reduced
physical or mental abilities should not use this product, unless they are under supervision or
they have been thoroughly instructed in the use of the apparatus by a person who is
responsible for the safety of these persons. Children should be closely supervised to ensure that
they do not play with this product.
The desk MUST be INITIALIZED before first use.
Read the INITIALIZATION chapter prior to operation.
Get help with assembly and report damaged or missing parts.
Email: [email protected]
Telephone: [phone]
Hours: 8:30 AM - 4:30 PM (PST)

4
Quick Setup Diagram
Setup should take about 15 minutes to complete. All required tools
are included. Keep the frame with tempered glass top in the box
during assembly to protect it from scratches.
Legs/Beam
Foot
Bracket
LED Control
Panel
Control Box
Motor
Get help with assembly and report damaged or missing parts.
Email: [email protected]
Telephone: [phone]
Hours: 8:30 AM - 4:30 PM (PST)
Frame with
Tempered Glass Top
Power Supply

5
Parts List
Tools & Hardware List
If you’re missing parts, contact us for replacements at [phone] or
send an email to [email protected]om
Please make sure you have all the parts on this list.
Leave the Top in the box during assembly
A. Frame with
Tempered Glass Top
(LED Control Panel,
and Power Supply
attached) (1)
B. Legs/Beam
(Motor attached) (1)
C. Brackets (2)
D. Feet (2)
E. M6 x 12 Screws (8)
F. M8 x 16 Screws (8)
G. 4 mm Hex Key
H. 5 mm Hex Key

G et h elp w it h assem b l y a nd report d ama g e d or missi ng parts.
E mail: [email protected]
Telep h o n e: 1 [phone]
H ours: 8:30 AM - 4:30 PM (PST) 6
Examine the location where you'll be
using the desk. Make sure there is a grounded
outlet or power strip nearby.
Assembly Instructions: Unpack
Remove the box lid and remove inner box containing parts.
Leave the frame with tempered glass top in the TOP
section of the box.
Layout all components and hardware. Examine each and make sure components
are without damage.
Frame with Tempered Glass Top
Pre-assembled Legs/
Beam (x1)
Feet (x2)
All Parts needed to assemble seen in
above figure. Essentially just 4 simple
steps of connecting 6 pieces in place.
Note: Outlet
voltage should be
110-120V

7
Assembly Instructions: Attach Support
Brackets to Legs/Beam using the M6 x 12 screws.
STEP 1. Attach BRACKETS (C) to sides of LEGS/BEAM (B) with M6 x 12 SCREWS (E) using
4 mm HEX KEY (G).
Get help with assembly and report damaged or missing parts.
Email: [email protected]
Telephone: [phone]
Hours: 8:30 AM - 4:30 PM (PST)
You should now have an assembled unit as pictured below.

8
Get help with assembly and report damaged or missing parts.
Email: [email protected]
Telephone: [phone]
Hours: 8:30 AM - 4:30 PM (PST)
Assembly Instructions: Frame with Tempered
Glass Top to Legs/Beam
STEP 2. Align FRAME WITH TEMPERED GLASS TOP (A) to the FRONT, the LED Control Panel
should be facing you. Center the holes on BRACKETS (C) and attach with M6 x 12 SCREWS (E)
using 4 mm HEX KEY (G). Make sure the motor is on the same side as the LED Control Panel.

9
Assembly Instructions: Connect Motor Cable
to Control Box
STEP 3. Plug in the Motor Cable from leg beam to Control Box as
displayed in below figure.
Get help with assembly and report damaged or missing parts.
Email: [email protected]
Telephone: [phone]
Hours: 8:30 AM - 4:30 PM (PST)
Motor
Cable
Control Box

10
Assembly Instructions: Final Steps
STEP 4. Attach FEET (D) to the bottom of table legs with four M8 x 16 SCREWS (F)
using 5 mm HEX KEY (H).
Get help with assembly and report damaged or missing parts.
Email: [email protected]
Telephone: [phone]
Hours: 8:30 AM - 4:30 PM (PST)
Lift with 2 people
TIP: Adjust the leveling feet by
rotating in and out as necessary to
ensure the desk stands level and is
not tilting.
Tip! Take time to make sure all screws have been tightened.
STEP 5. With the assistance of another person, lift and tilt the table onto its feet.
Remove tape

11
Use Instructions
DESK MUST BE INITIALIZED BEFORE FIRST USE
Up Arrow Down ArrowMemorySave Memory Display USB Charging Port
Get help with assembly and report damaged or missing parts.
Email: [email protected]
Telephone: [phone]
Hours: 8:30 AM - 4:30 PM (PST)
Initialize & Reset
Once your desk has been put together or when reset (initialization) is necessary:
1). Press & Hold the Down Arrow until the desk reaches the lowest position and/or stops moving.
2). Release your finger from the Down Arrow momentarily and then Press & Hold again until:
(a). Screen is flashing “RSt”.
(b). Desk rebounds.
(c). You will hear a “DING” sound.
3). Release your finger and this completes the initialization/reset procedure.
Adjust Height
Press and hold the Up Arrow to lift.
Press and hold the Down Arrow to lower.
Save Height
To save the desired height, lightly tap the “M” button on the LED Control Panel, and an “S-“ will appear.
Now tap on any one of the 3 Memory Buttons to successfully save and store the desired height.
Note, If a flashing “S-1” appears on the LED Control Panel, this signifies that the “M” button was pressed for
too long. Wait for the system to reset itself, should take 5 seconds, and then start the above process over.
Recall Height
Press the desired memory button. The desk will then adjust to the stored height.
Limited Height Setting
Control overall height limits of the desk to prevent the desk from going beyond a desired height level.
Press the Up Arrow + Down Arrow for 5 seconds until ding is heard.
Run to the limited height, press and hold Up Arrow + Down Arrow again for 5 seconds, when you hear the
ding sound, limited height canceled.
Child Safety Feature
Press the M button + Up Arrow for 5 seconds to lock the LED Control Panel and prevent the desk from
going up or down. LOC will display. Press the M button + Down Arrow for 5 seconds to unlock the LED
Control Panel.

12
Get help with assembly and report damaged or missing parts.
Email: [email protected]
Telephone: [phone]
Hours: 8:30 AM - 4:30 PM (PST)
Troubleshooting
Error Codes
Code Acon
- - - Reset the desk.
Problem Acon
Desk does not go up or down and the
LED control panel does not illuminate
when any button is pressed.
Check all connections. Make sure power cord is plugged into the control box
and a power outlet. Press any button on the
LED control panel and make sure it illuminates. Reset the desk.
Desk does not go up or down and the LED
Control Panel shows "- - -" The desk has an initialization fault and must be reset.
Legs do not go up evenly. Unplug the power cord and re-plug after 10 seconds.
Reset the desk.
Desk wobbles excessively. It is normal that desk moves slightly at standing height when in use. Retighten
all screws and bolts, and adjust leveling feet to make sure table stands level.
The desk motor is overheated. Stop using the desk for 20 minutes and
let it to cool down.
Desk legs are noisy. It is normal that desk makes noise when the leg levels move past each
other.
E01, E06, E07 Check to ensure all cables are connected.
E02, E08 Make sure desk is adjusted evenly and reset the desk.
E04 Unplug the LED Control Panel and plug it in once again.
E05 Ensure that there is nothing obstructing the desk from moving.
E11, E13 Check the motor cable.
E12 Contact customer service.
E14 - E16 Check all cables and reset, if issue persists, contact customer service.
E17 Check motor cable and reset the desk.
E18 Remove some weight from the tempered glass desktop until error clears.
Problem
HOT
Initialization Fault
Power Fault
Desktop Sloping
LED Control Panel Fault
Anti-Collision Activated
Motor Cable Fault
LED Control Panel Fault
Motor Cable Fault
Motor Fault
Overload
Motor Overheated
LOC Locked To unlock, press "M' button and "Down Arrow" button at the same time.

13
Warranty Information
7-Year Non-Electronic Component Warranty
Seville Classics, Inc. warrants to the original retail purchaser that if this product proves to be defective in
material or workmanship, we will replace the affected non-electronic part(s) for a period of seven
years on Seville Classics airLIFT® Electric Height Adjustable Standing Desks from the date of
original purchase.
2-Year Electronic Component Warranty
Seville Classics, Inc. warrants to the original retail purchaser that if this product proves to be defective in
material or workmanship we will replace the affected electronic part(s) for a period of two years on
Seville Classics airLIFT® Electric Height-Adjustable Standing Desks from the date of original purchase.
Except for the express warranty set forth above and except to the extent prohibited by applicable law,
Seville Classics grants no other express or implied warranties with respect to the product, its fitness for
any purpose, its quality, or its merchantability. The liability of Seville Classics under the warranty shall be
limited to the amount paid by the customer for the product. Seville Classics shall not be liable for any
loss of use of the product, or other incidental or consequential costs, expenses or damages incurred by
the customer or other user.
This warranty covers only the airLIFT® Height Adjustable Standing Desk sold in the United States of
America and Canada. Some states do not allow the exclusion or limitations of implied warranties or
consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives
you specific legal rights, and you may also have other rights that vary from state to state.
During the applicable warranty period, Seville Classics, at its option, will either refund the original pur-
chase price or replace the affected part(s) with comparable part(s) when the affected part(s) are
returned, postage prepaid, to the address below:
Seville Classics Inc.
19401 South Harborgate Way
Torrance, CA 90501 – 1322 U.S.A.
To obtain warranty coverage, you must:
Have an original copy of the purchase receipt or invoice from any authorized retailer.
For warranty questions please contact customer support.
Email: [email protected]
Telephone: [phone]
Hours: 8:30 AM - 4:30 PM (PST)

14
NOTE: This equipment has been tested and found to comply with the limits for Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and the receiver.
•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•Consult the dealer or an experienced Radio/TV technician for help
Get help with assembly and report damaged or missing parts.
Email: [email protected]
Telephone: [phone]
Hours: 8:30 AM - 4:30 PM (PST)

15
V02012022
Customer Service Information
Telephone: [phone]
Fax: [phone]
Hours: 8:30 AM – 4:30 PM (PST)
Email: [e-mail]
Homepage: www.SevilleClassics.com