SGM I-5 WASH LIGHT User manual

I-5 WASH LIGHT

2
Dimensions
495,5
472
437
388
268
192 143
190°
90
118
Measurements in millimetres.
Drawing not to scale.

3
I-5 WASH LIGHT
USER MANUAL
© 2017 SGM Light A/S®. Information subject to change without notice.
SGM and all affiliated companies disclaim liability for any injury, damage, direct or
indirect loss, consequential or economic loss or any other loss occasioned by the
use of, inability to use or reliance on the information contained in this manual.
The SGM logo, the SGM name and all other trademarks in this document
pertaining to services or products by SGM or its affiliates and subsidiaries are
trademarks owned or licensed by SGM or its affiliates or subsidiaries.
The original edition of this document is in English.
All other language editions are translations of the original edition.
This edition applies to firmware version 2.60 or later.
Rev. A

4
Dimensions ................................................................................................................... 2
Safety information ......................................................................................................... 8
Overview ..................................................................................................................... 11
Parts identification and terminology ............................................................................ 12
Preparing for installation ............................................................................................. 13
Unpacking................................................................................................................................................................ 13
Location/application ................................................................................................................................................. 14
Transportation.......................................................................................................................................................... 14
Installation / Rigging .................................................................................................... 15
Rigging process ....................................................................................................................................................... 16
Connecting AC power ................................................................................................. 17
Display panel operations ............................................................................................. 18
Using the display panel............................................................................................................................................ 18
Shortcuts.................................................................................................................................................................. 18
Contents

5
Display ........................................................................................................................19
Mode........................................................................................................................................................................ 19
DMX address ........................................................................................................................................................... 19
DMX signal indicator................................................................................................................................................ 19
Current input type .................................................................................................................................................... 19
Connecting to a DMX control device ........................................................................... 20
Connecting a wireless transmitter............................................................................................................................ 20
Disconnecting a wireless transmitter ....................................................................................................................... 20
Signal priority ........................................................................................................................................................... 20
Configuring the fixture for DMX control ....................................................................... 21
About DMX .............................................................................................................................................................. 21
DMX start address ................................................................................................................................................... 21
Set/edit DMX address.............................................................................................................................................. 21
Configuring the fixture using an Android device via RFID ....................................................................................... 22
SGM Tool App for Android....................................................................................................................................... 22
Getting fixture information using Android and RFID ................................................................................................ 22
Setting a DMX address and mode using Android and RFID ................................................................................... 22
Using stand-alone operation ....................................................................................... 23