SGM ILD User manual

ILD

2
ILD dimensions
All dimensions in mm.
Drawing not to scale.

3
ILD
USER MANUAL REV. 1
© 2012 SGMTM,QIRUPDWLRQVXEMHFWWRFKDQJHZLWKRXWQRWLFH6*0DQGDOODI¿OLDWHGFRP-
panies disclaim liability for any injury, damage, direct or indirect loss, consequential or
economic loss or any other loss occasioned by the use of, inability to use or reliance on
the information contained in this manual. The SGM logo, the SGM name and all other
WUDGHPDUNVLQWKLVGRFXPHQWSHUWDLQLQJWRVHUYLFHVRUSURGXFWVE\6*0RULWVDI¿OLDWHVDQG
VXEVLGLDULHVDUHWUDGHPDUNVRZQHGRUOLFHQVHGE\6*0RULWVDI¿OLDWHVRUVXEVLGLDULHV
English edition

4

5
Contents
Safety information.................................................................................................... 6
Overview.................................................................................................................. 8
Installing the ILD...................................................................................................... 9
Connecting AC power.............................................................................................11
Connecting to control data..................................................................................... 12
&RQ¿JXULQJWKHGHYLFH........................................................................................... 14
Service................................................................................................................... 16
6SHFL¿FDWLRQV ........................................................................................................ 17

6
Safety information
The ILD is intended for professional use only. It is not suitable for household use.
Review the following safety precautions carefully before installing or operating the device.
Preventing electric shock
Do not open the device; there are no user-serviceable parts inside.
Ensure that power is cut off when wiring the device to theAC mains supply.
Ensure that the device is electrically connected to earth (ground).
Do not apply power if the device is in any way damaged.
'RQRWLPPHUVHWKH¿[WXUHLQZDWHURUOLTXLG
DANGER! Risk of electric shock. Do not open the device.
WARNING! Read the safety precautions in this section before
installing, powering or operating this product.

7
Install only in a well-ventilated space.
Do not paint, cover, or modify the device.
Take precautions to prevent injury due to falls when working at height.
Ensure that the device is always securely fastened with suitable hardware.
For elevated installations, always comply with relevant load dimensioning and safety standards and
requirements.
WARNING! Take measures to prevent personal injury.

8
Overview
7KH,/'LVDQ$UWQHWSL[HOGULYHUWKDWFDQEHXVHGWRGULYHVL[6*0/7VWKUHH6*0/7RU6*0/('%DOO
SL[HOOXPLQDLUHV8SWR¿YH,/'VFDQEHFRQ¿JXUHGDQGFRQWUROOHGZKHQGDLV\FKDLQHGWRJHWKHUDQGFRQQHFWHGWRD
FRPSXWHUXVLQJDQ(WKHUQHWFDEOHDQGXSWR¿YH,/'¶VSHUSRUWFDQEHGDLV\FKDLQHGZKHQRQHRUPRUH(WKHUQHW
VZLWFKHVDUHXVHG,/'VFDQEHFRQ¿JXUHGXVLQJWKH6*0$UWQHW&RQ¿JXUDWRUDYDLODEOHIURPKWWSZZZVJPOLJKWFRP
and controlled using a lighting controller or computer-based Artnet controller.
8QSDFNWKHGHYLFHDQGLQVSHFWLWWRHQVXUHWKDWLWKDVQRWEHHQGDPDJHGLQWUDQVSRUW
7KH¿[WXUHLVQRWGHVLJQHGIRUSHUPDQHQWRXWGRRULQVWDOODWLRQEXWLWLV,3UDWHG7KLVPHDQVWKDWLWLVSURWHFWHGIURP
Dust, to the degree that there is no ingress of dust.
Lower pressure jets of water from any direction.

9
Installing the ILD
The ILD may be installed in any orientation.
%HIRUHLQVWDOOLQJ,/'VDWHOHYDWLRQHQVXUHWKDWWKH
$WWDFKPHQWKDUGZDUHLVLQJRRGFRQGLWLRQDQGGHVLJQHGWRVXSSRUWDWOHDVWWLPHVWKH¿[WXUH¶VZHLJKW
6WUXFWXUHFDQVXSSRUWDWOHDVWWLPHVWKHZHLJKWRIDOOLQVWDOOHG¿[WXUHV
Work area below is blocked from public access and make sure the work is performed from a stable platform.
:KHQXVLQJPRUHWKDQRQH,/'WRFUHDWHDQ/('FXUWDLQHQVXUHWKDWWKH,/'VDUHLQVWDOOHGVRWKDWWKHFRUUHFWSL[HO
pitch can be achieved.
$7%ROW%UDFNHWLVDYDLODEOHWRVXSSRUWDQ,/'ZKHQEROWHGWRDVXUIDFH)RURWKHUPRXQWLQJVROXWLRQVFRQVXOW\RXU
SGM representative.
WARNING! Always secure an elevated ILD with a safety cable as backup

10
T-bolt Bracket
8VHWZR7%ROW%UDFNHWVWRDWWDFKDQ,/'WRDÀDWVXUIDFH7KHVHEUDFNHWVDUH
secured to the mounting surface using three pieces of M6 hardware. To attach
an ILD to a bracket, slide the t-bolts into the attachment rail in the ILD casing
(A), turn the bolt 90 degrees so that its head is under the rail rim, and then
VHFXUHE\WLJKWHQLQJWKHQXW%

11
Connecting AC power
7KH,/'FDQRSHUDWHRQDQ\±9+]$&PDLQVSRZHUVXSSO\)RUWHPSRUDU\LQVWDOODWLRQVLQVWDOO
DJURXQGLQJW\SHHDUWKHGLQGXVWULDOSURQJHGW\SH%SOXJWKDWFRPSOLHVZLWK,(&RUDFRPSDUDEOH
national standard and is rated 16 A minimum, and use corresponding power outlet sockets. Follow the connector
PDQXIDFWXUHU¶VLQVWUXFWLRQVDQGDOOORFDOO\DSSOLFDEOHODZVDQGHOHFWULFDOVDIHW\FRGHV)RUSHUPDQHQWLQVWDOODWLRQV
KDYHDTXDOL¿HGHOHFWULFLDQKDUGZLUHWKH,/'WRWKH$&PDLQVVXSSO\
7KHGHYLFHPXVWEHJURXQGHGHDUWKHGDQGEHDEOHWREHLVRODWHGIURP$&SRZHU7KH$&SRZHUVXSSO\PXVW
incorporate a fuse or circuit breaker for fault protection.
Connecting LED pixels
7KH,/'LVDEOHWRGULYHVL[6*0/7VWKUHH6*0/7RU[6*0/('%DOO
SL[HOOXPLQDLUHV7KHVHFDQEHDWWDFKHGLQDQ\DUUDQJHPHQWWRWKHVL[FRQQHFWRUVRQWKH,/'
7KHVL[/('SL[HOFRQQHFWRUVRQWKH,/'DUHQRWGHVLJQWREHDUORDGV$OZD\VHQVXUHWKDWDQ\
DWWDFKHG/7V/7VDQG/('%DOOVDUHVXSSRUWHGE\RWKHUPHDQVWKDQDWWDFKPHQWWRDQ
ILD connector.

12
Connecting to control data
The device complies with the Artnet communications protocol. It must be connected to an Artnet
FRPSOLDQW/$1,3DGGUHVVHVLQWKH[[[UDQJH&RQQHFWWKH$UWQHWLQVRFNHWWRWKH$UWQHW
compliant LAN using an Ethernet cable with an RJ-45 connector. The ILD can feed control signals to
DQRWKHUGHYLFHLQDGDLV\FKDLQXVLQJWKH$UWQHWRXWVRFNHW'RQRWGDLV\FKDLQPRUHWKDQ¿YH,/'VRU
other driver devices from a single network port or computer, and use an Ethernet switch if more than
¿YH,/'VDUHEHLQJFRQ¿JXUHGDQGFRQWUROOHG
)RUFRPPXQLFDWLRQWRIXQFWLRQERWKWKH,/'DQGWKH3&PXVWEHRQWKHVDPHORFDODUHDQHWZRUN/$1ZLWK,3
DGGUHVVHVLQWKH[[[UDQJHZKLFKDUH,3DGGUHVVHVXVHGDQGUHFRJQLVHGE\$UWQHW7KH3&FDQEHFRQQHFWHG
GLUHFWO\WRDQ,/'XVLQJDQHWZRUN(WKHUQHWFDEOHDQGXSWR,/'VFDQEHGDLV\FKDLQHG7RFRQQHFWPRUHWKDQ¿YH
,/'VXVHDQ(WKHUQHWVZLWFKEXWGRQRWFRQQHFWPRUHWKDQ¿YH,/'VWRHDFKSRUW

13

14
&RQ¿JXULQJWKHGHYLFH
&RQ¿JXULQJWKHGHYLFHXVLQJWKH6*0$UWQHW&RQ¿JXUDWRU
2QFHSL[HOOXPLQDULHVDUHDWWDFKHGDQGWKH,/'LVFRQQHFWHGWR$&SRZHUVHWXSWKH,/'XVLQJWKHSGM Artnet
&RQ¿JXUDWRUDYDLODEOHIURPKWWSZZZVJPOLJKWFRP6HHWKH6*0$UWQHW&RQ¿JXUDWRU8VHU0DQXDO. The
6*0$UWQHW&RQ¿JXUDWRULQD:LQGRZVEDVHGDSSOLFDWLRQIRUFRQ¿JXULQJDQGDGGUHVVLQJ6*0$UWQHWSL[HO
GULYHUVVXFKDVWKH,/'7KH6*0$UWQHW&RQ¿JXUDWRUFDQEHXVHGWRFRQ¿JXUHWKH,/'DQGDVVLJQ'0;
DGGUHVVHVZLWKWKUHH'0;FKDQQHOVUHGJUHHQDQGEOXHWRHDFKSL[HO7KH,/'FDQEHFRQ¿JXUHGWRDGGUHVV
SL[HOVDFURVVPXOWLSOH'0;XQLYHUVHV$KLJKOLJKWIXQFWLRQHQDEOHVWHVWLQJRIWKHFRQ¿JXUDWLRQDQGSRZHU
PHDVXUHPHQWVDUHVKRZQ7KLVLVXVHIXOIRUWURXEOHVKRRWLQJLIWRRPDQ\SL[HOVDUHDWWDFKHGSHUIRUPDQFH
issues can occur, as an ILD may not supply more than 150 W).

15
&RQ¿JXULQJWKHGHYLFHXVLQJDQ$QGURLGWHOHSKRQHYLD5),'
As an alternative to connecting the device to power and using the 6*0$UWQHW&RQ¿JXUDWRU, one or more
,/'GHYLFHVFDQDOVREHFRQ¿JXUHGZLUHOHVVO\YLD5),'XVLQJWKH6*07RRODSSDYDLODEOHIURPWKH*RRJOH
3OD\6WRUHLQVWDOOHGRQDQ$QGURLGVPDUWSKRQHWKDWKDV1)&VXSSRUW,62DQG,62PRGH
FRPSDWLEOHRSHUDWLQJRQ0+]N+]FDUULHUIUHTXHQF\

16
Service
There are no user-serviceable components inside the device. Do not open the ILD, as doing so is likely to damage its
ingress protection. Consult your SGM dealer if the device operates abnormally, is defective or otherwise in need of
service or repair.
8SJUDGLQJWKH¿UPZDUH
:HUHFRPPHQGWKDW\RXWRNHHS\RXUGHYLFH¶V¿UPZDUHFXUUHQW9LVLWKWWSZZZVJPOLJKWFRPWRREWDLQWKHPRVWXSWR
GDWH¿UPZDUH7RSHUIRUP¿UPZDUHXSGDWHV\RXQHHGD:LQGRZVSHUVRQDOFRPSXWHUDQGWKH6*0$UWQHW&RQ¿JXUDWRU
DYDLODEOHIURPKWWSZZZVJPOLJKWFRP

17
6SHFL¿FDWLRQV
PHYSICAL
/HQJWK[ZLGWK[KHLJKW..................................................................................[[PP[[LQ
CONSTRUCTION
+RXVLQJ ............................................................................................................................................................... Steel
Finish ....................................................................................................................................................................%ODFN
INSTALLATION
Orientation...............................................................................................................................................................Any
AMBIENT OPERATING CONDITIONS
0D[LPXPDPELHQWWHPSHUDWXUH7a) ...................................................................................................... 40° C (104° F)
Minimum ambient temperature (Ta) ........................................................................................................ -10° C (14° F)
Operating humidity .............................................................................................................................................. 100%
,3UDWLQJ ................................................................................................................................................................,3

18
PROGRAMMING AND CONTROL
&RQ¿JXUDWLRQ ..................................................................................................YLD3&UXQQLQJ6*0$UWQHW&RQ¿JXUDWRU
&RQWURORIDWWDFKHG/('SL[HOV.......................................................YLD$UWQHWZLWKWKUHH'0;FKDQQHOVSHU/('SL[HO
Software upgrade .........................................................................................YLD3&UXQQLQJ6*0$UWQHW&RQ¿JXUDWRU
Wireless interface............................via RFID using an Android telephone that has NFC support and SGM Tools app
CONNECTIONS
Artnet data input .......................................................................................................................... RJ-45 female socket
Artnet data output ........................................................................................................................ RJ-45 female socket
3L[HOOXPLQDLUHFRQQHFWLRQV...................... 6L[WKUHDGHGVFUHZVFRPSDWLEOHZLWK6*0/7/7DQG/('%DOOV
ELECTRICAL
AC power ....................................................................................................................................±9+]
0D[LPXPWRWDOSRZHUFRQVXPSWLRQ.................................................................................................................... 150 W
6SHFL¿FDWLRQVVXEMHFWWRFKDQJHZLWKRXWQRWLFH

19

Table of contents
Other SGM Dj Equipment manuals
Popular Dj Equipment manuals by other brands

Avid Technology
Avid Technology Artist Control user guide

Ignition
Ignition TEATRO LED SPOT 100 PC user manual

MADRIX
MADRIX NEO Quick start guide & technical manual

Elation
Elation PALADIN user manual

LeuchtKraft
LeuchtKraft RGBL-412DMX instruction manual

Mebulbs
Mebulbs Compass High Bay 100-277V Install instructions