Sharp Actius PC-GP22W User manual

Go to the next page
Getting Started With Your
SHARP PERSONAL COMPUTER
THANK YOU FOR PURCHASING THE SHARP PERSONAL COMPUTER. WE HOPE YOU
WILL ENJOY COMFORTABLE COMPUTING, BUT BEFORE STARTING TO USE YOUR
COMPUTER, PLEASE FOLLOW THE INSTRUCTIONS BELOW.
1Open the carton box and check that the following items are included:
AC Power Cord AC Adapter Battery Pack Modem Cable
Cores for IEEE 1394 Cable
and LAN Cable Recovery CD-ROMs Pack Windows XP
Quick Start Guide Operation Manual
NOTEBOOK COMPUTER
PC-GP2 Series
OPERATION MANUAL
NOTEBOOK COMPUTER
PC-XXXSeries
OPERATION MANUAL
* Carefully inspect each component to make sure nothing is missing or damaged. If any of these
items is missing or damaged, notify your dealer immediately. Be sure to save the shipping
materials and carton in case you need to ship or store the computer in the future.
* Attach the cores to each of your LAN cable and IEEE1394 cable to insure compliance with
requirements of EMC regulations for computing equipment.
* Some other brochures or supplements may also be contained.
2Install the battery pack included with your computer.
1. Slide the battery lock lever to the unlocked position ( ).
Battery Lock Lever
2. Install the battery into the computer.
3. Push the battery pack into the computer until you hear the clicking sound.
561867184002
*QuickGP22W 02.9.26, 11:56 AMPage 1 AdobePageMaker6.5J/PPC

4. Slide the battery lock lever to the locked position ( ).
5. Turn over the computer and go to the next section.
3Connect the AC adapter to the computer.
Power Cord
AC Adapter
AC Adapter Jack
To Wall Outlet
4Open the display cover and set it to a comfortable viewing position.
5Press the power button to turn on the computer.
6Remove the optical drive protection sheet.
Protection Sheet
Eject Button
Press the eject button to draw out the tray; then, remove the sheet.
*QuickGP22W 02.9.26, 11:56 AMPage 2 AdobePageMaker6.5J/PPC

Go to the next page
7Setup Windows operating system by following the instructions on the screen.
1. Click
Next on Welcome to Microsoft
Windows dialog box.
2. Select your location, language and
keyboard; then, click Next .
3. Select your time zone; then, click Next .
4. Accept the license agreement; then, click
Next .
5. Name your computer if you will be
connecting to a LAN; then click Next . If
you want to skip, click Skip .
6. Click Skip on An Internet connection
could not be chosen dialog box. You will
be able to set up your internet connection
once you have completed the setup.
7. Select No..... and click Next . You can
register with Microsoft later.
8. Enter a user name in the Your name field;
then click Next . If you wish to add
additional users, we recommend doing
it after completing setup.
*QuickGP22W 02.9.26, 11:57 AMPage 3 AdobePageMaker6.5J/PPC

Now you are ready to use your computer. Enjoy comfortable
computing with the SHARP PC-GP Series.
9. Click Finish to complete the Windows
setup.
Product Information and Customer Assistance
Call: 1-800-BE-SHARP (237-4277)
Sharp Systems of America
5901 Bolsa Avenue, Huntington Beach, CA 92647
Home Page: http://www.sharpsystems.com
E-mail address: [email protected]
After a few minutes delay, Windows XP will
start. Double-click the time appearing at
the bottom right of your screen, and set
the correct time and date.
8Activate the integrated antennas for wireless LAN communication.
To enable the wireless antenna in your computer, press the Fn+F1 keys. When the antenna
indicator is green, the antennas are enabled. Refer to your operation manual and to the
manual of your access point or router for assistance with setting up your wireless network.
Antenna Indicator
To disable the wireless antenna, press Fn+F1 keys again.
*QuickGP22W 02.9.26, 11:57 AMPage 4 AdobePageMaker6.5J/PPC