Sharp 21HT-15C User manual

21HT-15C
21HT-16C
MAGYARPOLSKI
SLOVENČINA
TV
COLOUR TELEVISION
BAREVNÝ TELEVIZOR
SZÍNES TELEVÍZIÓ
KOLORWY TELEWIZOR
ЦBETHOЙ TEЛEBNЗOP
RECEPTOR DE TELEVIZIUNE ÎN CULORI
FAREBNÝ TELEVÍZOR
OPERATION MANUAL
NÁVOD K OBSLUZE
HASZNÁLATI UTASÍTÁS
INSTRUKCJA OBSŁUGI
CБОPHИK ИHCTPУKЦИЯ
INSTRUC©IUNI DE UTILIZARE
NÁVOD NA OBSLUHU
ENGLISHČESKY
All manuals and user guides at all-guides.com
all-guides.com

1
Web-site: www.sharp.co.uk/support Help Line (office hours only): 0990-274277
ENGLISH
Safety Precautions
This equipment complies with the requirements of Directives 89/336/EEC and 73/23/EEC as amended
by 93/68/EEC.
;;;;;;;;
;;;;;;;;
;;;;;;;;
;;;;;;;;
;;;;;;;;
;;;;;;;;
;;;;;;;;
;;;;;;;;
;;;;;;;;
;;;;;;
;;;;;;
;;;;;;
;;;;;;
;;;;;;
;;;;;;
;;;;;;
;;;;;;
;;;;;;
;;;;;;
;;;;;;
;;;;;;
;;;;;;
CAUTION: Make sure that the main power is switched off when going out.
;;;;;;;;;
;;;;;;;;;
;;;;;;;;;
;;;;;;;;;
;;;;;;;;;
;;;;;;;;;
;;;;;;;;;
;;;;;;;;;
;;;;;;;;;
;;;;;;;;;
;;;;;;;;;
;;;;;;;;;
;;;
;;;
;;;
;;;;;
;;;;;
;;;;;
;;;
;;;
;;;
;;;;
;;;;
;
;
;
To prevent fire or electrical
shock, do not use the TV set
in an excessively damp
place.
Position the TV set out of
direct sunlight and away from
heat, as high temperatures
can damage the cabinet, CRT,
or other electronic parts.
Do not cover the ventilation
holes at the back of theTV
set, this can cause fire or
other serious problems. Leave
an adequate open space
behind the TV set for good
ventilation.
Do not install this equipment
in a confined space, such as a
bookcase or built-in cabinet.
Television equipment and cart
combination should be moved
with care. Quick stops,
excessive force, and uneven
surfaces may cause the
equipment and cart
combination to overturn.
Never remove the back of the
cabinet, as there is high
voltage inside theTV set.
Please call for service.
Unplug the power cord from
the wall outlet immediately if
the TV set begins to make
unusual noises or gives off
smoke or an odd smell, then
call your dealer for service.
Always disconnect your television
from the mains amd the aerial
cable during thunderstorms.
Ever if your television is switched
off, it can still be damaged by
lightning striking th mains and/or
aerial cable.
To prevent fire, never place
any type of candle or naked
flames on the top or near the
TV set.
Wall or shelf mounting should
follow the manufacturer’s
instructions, and should use a
mounting kit approved by the
manufacturer.
Do not place this television equipment on an unstable cart, stand, or table.The television
equipment may fall, causing serious injury to a child or an adult, and serious damage to the
equipment.
Use only with a cart or stand recommended by the manufacturer, or sold with the television
equipment.
Never insert or drop any metallic or inflammable objects into the venitilation holes of the TV
set, this can cause fire, electrical shock or electrical failure. Do not place a flower vase or
anything else containing liquid on the TV set, as liquid spilt on the TV set can cause
serious problems.
All manuals and user guides at all-guides.com

2
Remote control Size-AA Dry battery
Contents
Dear SHARP Customer
Congratulations!You are now the proud owner of a SHARP Colour Television Receiver.To
ensure proper operation, please read this manual carefully. After reading, keep this manual in a
safe place for future reference.
Accessories
1 2 3
4 5 6
7 8 9
0
LIST
MENU
?
XiS
I
TV/VIDEO
TV/TEXTREMOTE CONTROL
CH
CH
Operation Manual
21HT-15C
21HT-16C
ENGLISHČESKYMAGYARPOLSKI
SLOVENČINA
TV
COLOURTELEVISION
BAREVNÝ TELEVIZOR
SZÍNES TELEVÍZIÓ
KOLORWYTELEWIZOR
ЦBETHOЙ TEЛEBNЗOP
RECEPTORDE TELEVIZIUNE ÎN CULORI
FAREBNÝ TELEVÍZOR
OPERATIONMANUAL
NÁVODK OBSLUZE
HASZNÁLATI UTASÍTÁS
INSTRUKCJA OBSŁUGI
CБОPHИK ИHCTPУKЦИЯ
INSTRUC©IUNI DE UTILIZARE
NÁVOD NA OBSLUHU
Remote Control Battery Installation
Before using the TV set for the first time, install the supplied dry batteries in the remote control.
• Remove batteries if weak or if the unit is not in use for long periods.
• Do not mix old and new batteries.
• Incorrect installation of the batteries may damage the remote control.
NOTE
#Replace the battery cover.!With your thumbnail, pull up
the slit as indicated by the
arrow to remove the battery
cover.
@Insert two batteries 1.5 V (size
“AA”). Be sure to match the
battery /terminals with
the /marks inside the
compartment.
General Information
Safety Precautions............ 1
Accessories....................... 2
Battery Installation ............ 2
Installing your TV
Aerial Connections............ 3
Typical Connections.......... 3
Location of Controls .......... 4
Channel Setting
Auto Tuning ....................... 5
Manual Tuning .................. 6
Fine Tuning ....................... 8
Skipping Programmes....... 9
Manual Channel Sorting .. 11
Channel Sorting .............. 12
Basic Operation
Watching aTV programme .. 13
Useful Features
Picture Adjustment .......... 14
Timer Setting................... 15
Child Lock ....................... 17
Other Functions
Flashback & Sound Mute ... 20
TV/VIDEO & Call buttons ... 21
Teletext............................ 22
Reference
Troubleshooting .............. 25
Specifications.................. 26
All manuals and user guides at all-guides.com

3
Web-site: www.sharp.co.uk/support Help Line (office hours only): 0990-274277
ENGLISH
75-ohm coaxial cable (round cable)
Aerial Connections
• To enjoy a clearer picture, we recommend that you use an outdoor aerial.The following is a brief
explanation of the types of connection that are used for coaxial:
Aerial Lead: Connect the cable from the aerial to a
standard DIN45325 plug (IEC169-2) and plug it
into the aerial terminal at the back of theTV set.
Rear of TV
SCART-terminal
Aerial terminal
Typical Connections
Enjoy the stunning visuals of a VCR or DECODER by connecting them to this TV set through its Euro-
SCART 21-Pin terminal.
Please refer to the Operation Manual of your VCR for details.
Typical connection (VCR and TV)
through the RF terminal
LINE2IN/DECODER
LINE1 IN/OUT
TESTSIG
ON
OFF
CHANNEL
ANTENNAIN
RFOUT
Back of VCR
Rear of TV
Scart Terminal
Aerial IN
Aerial Lead
(not supplied)
Aerial Lead
(not supplied)
Aerial Lead
(not supplied)
Antenna in
RF Out
SCART Lead
(not supplied)
Outdoor aerial
(not supplied)
All manuals and user guides at all-guides.com

4
Location of Controls
Remote Control
TV Front
MENU CH
Power ( ) button
Power/On Timer indicator
Remote Control Sensor Menu button Volume Up ( )/Down ( ) buttons
Channel Up ( )/Down ( ) buttons
3
6
9
LIST
MENU
I
TV/VIDEO
S
I
1 2
4 5
7 8
0
?
XiS
TV/TEXT REMOTE CONTROL
CH
CH
i
X
?
CALL ( )/CHILD LOCK ()button ~
Infrared Transmitter Window
Aim this window at the infrared sensor
on your TV set
FLASHBACK ( ) button
Returns to previously viewed
programme
21
TV/VIDEO Select button
21
17 18
SOUND MUTE ( )button
20
POWER/STANDBY ( )button
13
Programme Select buttons
13
REVEAL ( ) button (Teletext)
23
HALF PAGE ( ) button (Teletext)
23
20
CLOCK ( ) button (Teletext)
23
VOLUME UP ( )/DOWN ( ) button
( ) Increases sound
( ) Decreases sound
(These are also used for menu set up)
13
CANCEL ( ) button (Teletext)
23
RESET ( ) button (Teletext)
23
Single/Double Entry button ( )
13
Text/Mix/Picture ( )Select
button (Teletext)
22
~ COLOUR buttons
22 24
~ LIST Select button (Teletext)
23 24
INDEX ( )button (Teletext)
23
HOLD ()button (Teletext)
23
STORE ()button (Teletext)
23
CHANNEL (PROGRAMME) UP ( )/
DOWN ( ) button
( ) Selects next higher programme
( ) Selects next lower programme
(These are also used for menu
set up)
8
All manuals and user guides at all-guides.com

5
ENGLISH
NOTE
Channel Setting
This function will automatically tune all local channels for you.
The following steps are carried out using the remote control
Initial setting AutoTuningtunes in and presets receivable TV stations
Automatically tunes in and presets receivableTV stations
1
Press the main POWER button
on the TV.When you install theTV
at first time, it will appears this
picture.
2
AUTO TUNING will start when
selecting “START”, using
CH
and
CH
and pressing
MENU
on
the remote control, or pressing
MENU
on the TV.
All the TV stations in your area
that can be received by the TV set
are automatically preset between
programme position 1 to 99.
The screen shows whatever is on
programme position 1 when full
auto channel preset is finished.
NOTE:Make sure to execute AUTO TUNING until tuning is complete.When EXIT has been
selected during tuning or when the power has been turned off and then turned on again,
the AUTO TUNING screen will be displayed.
After initial setting Auto tuning
Automatically tunes in and presets receivableTV stations
The AUTO TUNING screen will
appear by holding down
MENU
on
the TV for more than 2 seconds.
2
Repeat step 2 above from page 5 (Initial seting)
• To stop AUTO TUNING, press
MENU
on the remote
control.
• When AUTO TUNING is not done, select EXIT
by using
CH
and
CH
on the remote control
or press
MENU
on the TV to return to the TV
screen.
• Make sure to start AUTO TUNING after connecting the antenna, as the AUTO TUNING
screen will be displayed when the power is turned on for the first time.
• Make sure to execute AUTO TUNING until tuning is complete.When EXIT has been
selected during tuning or when the power has been turned off and then turned on again,
the AUTO TUNING screen will be displayed.
• When the Child Lock is set, it is not possible to enter the Tuning mode.This is to make
sure that Child Lock is not over-ridden by re-tuning the set.(To cancel Child Lock please
refer to page 19.)
MENU CH
AUTO TUNING
START EXIT
AUTO TUNING
START EXIT
PR 1
AUTO TUNING
PR
0 2 CH 0 2
1
AUTO TUNING
START EXIT
1 2 3
4 5 6
7 8 9
0
LIST
MENU
?
XiS
I
TV/VIDEO
TV/TEXT REMOTE CONTROL
CH
CH
All manuals and user guides at all-guides.com
all-guides.com

6
1 2 3
4 5 6
7 8 9
0
LIST
MENU
?
XiS
I
TV/VIDEO
TV/TEXT REMOTE CONTROL
CH
CH
SORT
EXIT
<PR>
EXIT
SORT
<PR>
PR1 CH1
SKIP OFF
FINE
OFF
EXIT
SYS D/K
Channel Setting (Continued)
This section describes how to tune your TV manually and to store channels in the order you prefer.
The following steps are carried out using the remote control.
Manual Tuning
Setting a TV station to a desired programme position
1
Press
MENU
to call the MAIN menu
screen.
2
Press
CH
or
CH
to select
“<PR>”, and press
MENU
.
3
Press
CH
or
CH
to select
“PR” position, and select the
programme number (1–99) with
or .
4
Press
CH
or
CH
to select
“CH”, and select the channel
number, with or buttons.
5
Press
CH
or
CH
to select
“SYS”, and press
MENU
to change
the SYSTEM.
The system switches between
SECAM-B/G, D/K and PAL-B/G,
D/K
Sound System On screen
display
SECAM-D/K D/K
PAL -D/K
SECAM-B/G B/G
PAL-B/G
PR1 CH1
SKIP OFF
FINE
OFF
EXIT
SYS D/K
PR1 CH1
SKIP OFF
FINE
OFF
EXIT
SYS D/K
All manuals and user guides at all-guides.com

7
ENGLISH
PR1 CH1
SKIP OFF
FINE
OFF
EXIT
SYS D/K
PR1 CH1
SKIP OFF
FINE
OFF
EXIT
SYS D/K
NOTE
Channel Setting (Continued)
Repeat steps 3 to 5 if you wish to
set other channels.
Press
CH
or
CH
to select
“EXIT”, and press
MENU
to return to
the normal screen.
If there is no sound and the key mark ( ) is displayed after setting the channels, the
Child Lock Mode has been activated. To cancel the settings, make sure to set key mark
() to OFF.
6
7
1 2 3
4 5 6
7 8 9
0
LIST
MENU
?
XiS
I
TV/VIDEO
TV/TEXT REMOTE CONTROL
CH
CH
All manuals and user guides at all-guides.com

8
1 2 3
4 5 6
7 8 9
0
LIST
MENU
?
XiS
I
TV/VIDEO
TV/TEXT REMOTE CONTROL
CH
CH
Channel Setting (Continued)
Fine Tuning
This function lets you easily fine-tune the TV set to improve reception and picture quality.
1
Press
MENU
to call the MAIN menu
screen.
2
Press
CH
or
CH
to select
“<PR>”, and press
MENU
.
3
Press
CH
or
CH
to select
the “FINE” position.
4
Press and hold or until
the best tuning position is found.
5
Press
CH
or
CH
to select
“EXIT”, and press
MENU
to return to
the normal screen.
EXIT
SORT
<PR>
EXIT
SORT
<PR>
PR1 CH1
SKIP OFF
FINE
EXIT
OFF
SYS D/K
PR1 CH1
SKIP OFF
FINE
EXIT
OFF
SYS D/K
PR1 CH1
SKIP OFF
FINE
EXIT
OFF
SYS D/K
All manuals and user guides at all-guides.com

9
ENGLISH
Channel Setting (Continued)
Skipping Programmes
This function lets you skip vacant channels or channels that you never watch when you select
channels with
CH
or
CH
.
Setting Skip
1
Press
MENU
to call the MAIN menu
screen.
2
Press
CH
or
CH
to select
“<PR>”, and press
MENU
.
3
Press
CH
or
CH
to select
the “PR” position, and select the
programme number (1–99) you
wish to skip with or .
4
Press
CH
or
CH
to select
“SKIP”, and press
MENU
to select
the “SKIP ON”.
The programme number will turn
from white to red.
5
Repeat steps 3 to 4 if you wish to
skip other programme.
6
Press
CH
or
CH
to select
the “EXIT”, and press
MENU
to return
to the normal screen.
EXIT
SORT
<PR>
EXIT
SORT
<PR>
PR3 CH4
SKIP OFF
FINE
EXIT
OFF
SYS D/K
PR3 CH4
SKIP ON
FINE
EXIT
OFF
SYS D/K
PR3 CH4
SKIP ON
FINE
EXIT
OFF
SYS D/K
1 2 3
4 5 6
7 8 9
0
LIST
MENU
?
XiS
I
TV/VIDEO
TV/TEXT REMOTE CONTROL
CH
CH
All manuals and user guides at all-guides.com

10
Channel Setting (Continued)
Cancelling Skip
1
Press
MENU
to call the MAIN menu
screen.
2
Press
CH
or
CH
to select
“<PR>”, and press
MENU
.
3
Press
CH
or
CH
to select
the “PR” position, and select the
programme number (1–99) for
which you wish to cancel skip with
or .
Select a skipped programme
number displayed in red.
4
Press
CH
or
CH
to select
“SKIP”, and press
MENU
to select
the “SKIP OFF”.
The displayed programme number
will turn from red to white.
5
Repeat steps 3 to 4 if you wish to
cancel skip other programme.
6
Press
CH
or
CH
to select
the “EXIT”, and press
MENU
to return
to the normal screen.
1 2 3
4 5 6
7 8 9
0
LIST
MENU
?
XiS
I
TV/VIDEO
TV/TEXT REMOTE CONTROL
CH
CH
EXIT
SORT
<PR>
EXIT
SORT
<PR>
PR1 CH1
SKIP ON
FINE
EXIT
OFF
SYS D/K
PR3 CH1
SKIP OFF
FINE
EXIT
OFF
SYS D/K
PR1 CH1
SKIP OFF
FINE
EXIT
OFF
SYS D/K
All manuals and user guides at all-guides.com
all-guides.com

11
ENGLISH
SORT 1/6
1CH 2 7CH1 13CH7
2CH 3 8CH12 14CH71
3CH19 9CH13 15CC 1
4CH 5 1CH16 16CC 2
5CH 8 11CH17 17CC 3
6CH 9 12CH2 18CC 4
EXIT
SORT 1/6
1CH 2 7CH1 13CH7
2CH 3 8CH12 14CH71
3CH19 9CH13 15CC 1
4CH 5 1CH16 16CC 2
5CH 8 11CH17 17CC 3
6CH 9 12CH2 18CC 4
SELECTED:CH 2
MOVE DELETE
EXIT
SORT 2/6
19CC9 25CC14 31CC44
2CC1 26CC18 32CC45
21CC11 27CC19 33CC46
22CC12 28CC21 34CC47
23CC13 29CC23 35CC48
24CH 6 3CC43
3CC43
36CC5
EXIT
SORT 2/6
19CC1 25CC18 31CC44
2CC11 26CC19 32CC45
21CC12 27CC21 33CC46
22CC13 28CC23 34CC47
23CC 6 29CC43 35CC48
24CH14 3CH2 36CC5
EXIT
SORT 2/6
19CC1 25CC18 31CC44
2CC11 26CC19 32CC45
21CC12 27CC21 33CC46
22CC13 28CC23 34CC47
23CC 6 29CC43 35CC48
24CH14 3CC2 36CC5
EXIT
EXIT
SORT
<PR>
1 2 3
4 5 6
7 8 9
0
LIST
MENU
?
XiS
I
TV/VIDEO
TV/TEXT REMOTE CONTROL
CH
CH
Channel Setting (Continued)
Manual Channel Sorting
When moving channel 20 from pre-set channel 12 to pre-set channel 30, follow the steps below:
1
Press
MENU
to call the MAIN menu
screen.
Using
CH
or
CH
, and select
“SORT” by pressing
MENU
.
2
Select channel 20 of the preset
channel 12 using
CH
or
CH
and or and set it by
pressing
MENU
.
3
Move the cursor to “MOVE” using
CH
or
CH
and or
and select it by pressing
MENU
.
4
Using
CH
or
CH
and or
move to the next screen and
select preset channel 30.
5
Pressing
MENU
will insert channel 20
in the preset channel 30 field.
Preset channels over pre-set
channel 31 will be automatically
sorted.
6
Select “EXIT” using
CH
or
CH
and or and press
MENU
to return to the TV Screen.
NOTE
If you are using a decoder (Premiere Decoder, Canal Plus, etc.) please
disconnect it before using the tuning (<PR>) and sort (SORT) menus.
All manuals and user guides at all-guides.com

12
1 2 3
4 5 6
7 8 9
0
LIST
MENU
?
XiS
I
TV/VIDEO
TV/TEXT REMOTE CONTROL
CH
CH
SORT 1/6
1CH 2 7CH1 13CH7
2CH 3 8CH12 14CH71
3CH19 9CH13 15CC
4CH 5 1CH16 16CC
5CH 8 11CH17 17CC
6CH 9 12CH2 18CC
EXIT
SORT 1/6
1CH 2 7CH1 13CH7
2CH 3 8CH12 14CH71
3CH19 9CH13 15CC
4CH 5 1CH16 16CC
5CH 8 11CH17 17CC
6CH 9 12CH2 18CC
SELECTED:CH 13
MOVE DELETE
EXIT
SORT 1/6
1CH 2 7CH1 13CH71
2CH 3 8CH12 14CC 1
3CH19 9CH16 15CC 2
4CH 5 1CH17 16CC 3
5CH 8 11CH2 17CC 4
6CH 9 12CH7 18CC 5
EXIT
SORT 1/6
1CH 2 7CH1 13CH71
2CH 3 8CH12 14CC 1
3CH19 9CH16 15CC 2
4CH 5 1CH17 16CC 3
5CH 8 11CH2 17CC 4
6CH 9 12CH7 18CC 5
EXIT
EXIT
SORT
<PR>
Channel Setting (Continued)
Channel Sorting (Delete)
1
Press
MENU
to call the MAIN menu
screen.
Using
CH
or
CH
, select
“SORT” by pressing
MENU
.
2
Select channel 13 in the preset
channel 9 field using the
CH
or
CH
and or and set it
by pressing
MENU
.
3
Using the
CH
or
CH
and
or select “DELETE” and
press
MENU
.
4
Pressing
MENU
will delete channel
13 in the preset channel 9 field
and replace it by channel 16.
5
Select “EXIT” using the
CH
or
CH
and or and press
MENU
to return to the TV Screen.
All manuals and user guides at all-guides.com

13
ENGLISH
CH
CH
1 2 3
4 5 6
7 8 9
0
LIST
MENU
?
XiS
I
TV/VIDEO
TV/TEXT REMOTE CONTROL
CH
CH
VOLUME UP or
DOWN button
CHANNEL UP or
DOWN button
POWER
indicator
POWER
button
Basic Operation
Watching a TV Programme
Preparation |Turning on the power on the TV set.
Press .
If a picture appears on the screen, go to step 2.
If a picture does not appear on the screen, go to step 1.
1
Turning on the power
Press
A picture appears on the screen.
2
Selecting the programmes
Example:
When selecting programme
position 5
5
When selecting programme
position 23
2 3
3
Adjusting the volume
Decreases
the volume Increases
the volume
PR 1
PR 1
PR 5
PR 23PR --
PR 2-
NOTE
If you go away on a trip or will not be at home for a considerable length of time, as a
safety precaution, please unplug the cord from the outlet.
All manuals and user guides at all-guides.com

14
Picture Adjustment
Adjusting the Picture
Picture quality (CONTRAST, COLOUR, BRIGHTNESS, SHARPNESS) are adjustable in this menu.
1
Press
MENU
to call the MAIN menu
screen.
2
Press
CH
or
CH
to select
“”, and press
MENU
.
3
Press
CH
or
CH
to select
the items to adjust.
4
Adjust the picture quality to your
liking with or .
5
Repeat steps 3 and 4 above to
adjust other items.
6
By selecting “N” you can reset the
picture parameters to the factory
setting.
Press
MENU
to restore the factory
setting “N ON” mode.
7
You can clear the on-screen
display by selecting “EXIT” using
CH
or
CH
, and press
MENU
.
Selected item
CONTRAST
COLOUR
BRIGHTNESS
SHARPNESS
TINT
NORMAL
TINT
N ON
1 2 3
4 5 6
7 8 9
0
LIST
MENU
?
XiS
I
TV/VIDEO
TV/TEXT REMOTE CONTROL
CH
CH
EXIT
SORT
<PR>
EXIT
SORT
<PR>
TINT
N ON EXIT
TINT
N OFF EXIT
TINT
N OFF EXIT
TINT
N ON EXIT
All manuals and user guides at all-guides.com

15
ENGLISH
NOTE
1 2 3
4 5 6
7 8 9
0
LIST
MENU
?
XiS
I
TV/VIDEO
TV/TEXT REMOTE CONTROL
CH
CH
EXIT
SORT
<PR>
ON .
OFF .
EXIT
ON 8.3
OFF .
EXIT
Timer Setting
ON Timer
Automatically turns the power ON after the set time has passed.
1
Press
MENU
to call the MAIN menu
screen.
2
Press
CH
or
CH
to select
, and press
MENU
.
3
Press
CH
or
CH
to select
“ON”mode.
4
Press or to set the time.
(from 10 min. to 12 hour 50 min.,
in 10 min. increments)
5
Press to set the TV into
Standby mode.The Power
indicator flashes red.
When the preset time (in the
above example, 8 hours and 30
minutes) has passed, the power
turns ON and a picture appears
on the screen.
•In order to know when the ON Timer programme has been run properly, when the TV is
in the standby mode, the ON Timer indicator remains flashing in red.
•As a safety precaution, in case nobody is at home when the television switches on
automatically, the television will disconnect itself automatically within 120 minutes ; any
button of the remote control functions should be pressed, if it is to remain ON.
•In the event of a power cut, disconnection from the plug, or the television is switched off
at the mains switch, all the data in the ONTimer will be cancelled.
•The TIMER settings will remain if you exit the TIMER setting screen after setup.
All manuals and user guides at all-guides.com
all-guides.com

16
NOTE
Timer Setting (Continued)
OFF Timer
Automatically turns the power OFF after the set time has passed.
1
Press
MENU
to call the MAIN menu
screen.
2
Press
CH
or
CH
to select
“”, and press
MENU
.
3
Press
CH
or
CH
to select
“OFF”mode.
4
Press or to set the time.
(from 10 min. to 12 hour 50 min.,
in 10 min. increments)
The timer starts to count down.
5
After setting the time, select
“EXIT”by pressing
CH
or
CH
and press
MENU
.
When the preset time (in the
above example, 1 hour and 30
minutes) has passed, the TV set
turns to Stand-by mode.
•In the event of a power cut, disconnection from the plug, or the television is switched off
at the mains switch, all the data on the OFFTimer will be cancelled.
•The TIMER settings will remain if you exit the TIMER setting screen using EXIT after
setup.
1 2 3
4 5 6
7 8 9
0
LIST
MENU
?
XiS
I
TV/VIDEO
TV/TEXT REMOTE CONTROL
CH
CH
EXIT
<PR>
SORT
ON .
OFF .
EXIT
ON .
OFF 1.3
EXIT
ON .
OFF 1.3
EXIT
All manuals and user guides at all-guides.com

17
Web-site: www.sharp.co.uk/support Help Line (office hours only): 0990-274277
ENGLISH
NOTE
Child Lock (Channel Block)
You can lock a TV channel to prevent unsupervised TV viewing by following these procedures:
Setting Child Lock
1
Press
MENU
to call the MAIN menu
screen.
2
Press
CH
or
CH
to select
“<PR>” and press
MENU
.
3
Select the programme you want
to lock using or . (You
can also select the programme
using the 0~9 digit buttons.)
4
Press
CH
or
CH
to select
“ON” then press
MENU
.
5
Repeat steps 2~3 if you wish to
lock other programme.
6
Press
CH
or
CH
to select
“EXIT” and press
MENU
.
You can also block the SCART connection.
CAUTION
• When you select a locked channel, the TV picture will be blue and the mark “ ” appears
on the screen.
• Press to unlock the channel.
• Since the remote control is the “Key” to unlock TV channel you must remember not to let
the remote control out of your supervision.
1 2 3
4 5 6
7 8 9
0
LIST
MENU
?
XiS
I
TV/VIDEO
TV/TEXT REMOTE CONTROL
CH
CH
EXIT
SORT
<PR>
PR1 CH1
SKIP OFF
FINE
OFF
EXIT
SYS D/K
PR1 CH1
SKIP OFF
FINE
ON
EXIT
SYS D/K
PR1 CH1
SKIP OFF
FINE
ON
EXIT
SYS D/K
All manuals and user guides at all-guides.com

18
Child Lock (Continued)
Opening Child Lock
Watching a programme position set with the Child Lock.
1
Select the child lock programme
position.
2
Hold down for more than 2
seconds.
The screen of the child locked
programme is displayed.
1 2 3
4 5 6
7 8 9
0
LIST
MENU
?
XiS
I
TV/VIDEO
TV/TEXT REMOTE CONTROL
CH
CH
PR 5
All manuals and user guides at all-guides.com

19
Web-site: www.sharp.co.uk/support Help Line (office hours only): 0990-274277
ENGLISH
1 2 3
4 5 6
7 8 9
0
LIST
MENU
?
XiS
I
G1060SA
TV/VIDEO
TV/TEXT REMOTE CONTROL
CH
CH
EXIT
SORT
<PR>
PR1 CH1
SKIP OFF
FINE
OFF
EXIT
SYS D/K
PR1 CH1
SKIP OFF
FINE
OFF
EXIT
SYS D/K
EXIT
SORT
<PR>
Child Lock (Continued)
Cancelling Child Lock
Releasing the Child Locked programme.
1
Select the child lock programme
position.
2
Press
MENU
to call the MAIN menu.
3
Press
CH
or
CH
to select
“<PR>” and press
MENU
.
4
Hold down for more than 4
seconds.
5
Tuning screen is displayed.
Press
CH
or
CH
to select
“OFF” by pressing
MENU
.
6
Repeat steps 2~3 if you wish to
unlook other programme.
7
Press or to select “EXIT”
and press
MENU
.
All manuals and user guides at all-guides.com