- 3 -
MAINTENANCE
After using 5-6 times or 3-4 days, clean the product as follows:
1. Unplug the unit from its main power supply and remove the cover.
2. Pour out any remaining water from the tank.
3. Add a small amount of dish soap and water into the tank and wipe gently with a dry towel to
clean. Note: Avoid getting water into the air outlet.
4. Do not use other acids or aggressive detergents, as this may give off poisonous gas or
cause malfunction.
5. Change the water in the water tank every day and clean the diffuser regularly.
6. Pour the water out of the diffuser when it’s not in use. Water accumulated over long periods
may create bacteria and mildew.
7. Never immerse the unit in water or let water enter the air outlet or any other entrance.
TROUBLESHOOTING
SPECIFICATIONS
PRODUCT NAME HOLIDAY SNOWFLAKE 3D ROTATING
AROMATHERAPY DIFFUSER
INPUT VOLTAGE AC 100-240V
OUTPUT VOLTAGE DC24V
CAPACITY 8.4OZ
POWER 10W
LED NIGHT LIGHT 7 COLOR LIGHTS
HUMIDIFICATION 25 ML/H
MATERIAL PP
HUMIDITY CONTROL MANUAL
WORKS IN ROOMS FROM: 215-269 SQ. FT.
ULTRASONIC RATE 1.7MHZ AROMA DIFFUSER
PROBLEM REASON SOLUTION
Diffuser won’t
turn on
The mist is low, or no
mist comes out at all
The water tank is
overfilled past the max
line.
Check the water tank line
to see if the water has
been overfilled.
More water needs to be
added into the water tank.
Add water.
Check the air outlet and
see if the fan is working
properly.
The air inlet is blocked.
PCB damaged. Contact customer service.
The outer cover or
water cover is blocked
by water film or other
foreign objects.
Clean the outer cover
and water cover with a
towel regularly.
The connector is not
plugged in or not
connected properly.
Check to see if the plug is
properly connected.
The main power supply is
not connected properly.
Check the main power
supply.
Contact customer service.
The product is damaged.
